This machine has been engineered from the ground up in the truest South Bend fashion & the results are extraordinary! Attention to detail begins with accurate, smooth ways, robust D1-5 spindle with Japanese made tapered roller bearings, extra-wide, flame hardened gears, pressurized headstock lubrication, variable spindle speeds–all supported on a massive cast iron base. It comes fully outfitted & ready for work: flood coolant system, halogen work light, spindle brake, steady & follow rests, 3-jaw & 4-jaw chucks & centers. This all adds up to a lathe that can hog out huge quantities of chips for best production rates or give extremely fine finishes (even second operations) in the most difficult materials to machine.
Specifications:Swing over bed: 13.38"Distance between centers: 40"Swing over cross slide: 8.26"Swing over gap: 20"Swing over saddle: 11.02"Cross slide travel: 7"Compound travel: 4"Carriage travel: 36.5"Spindle nose: D1-5 CamlockSpindle bore: 1.65" (42mm)Taper inside spindle: MT #5Spindle speed: Variable from 100-3000 RPMNumber of longitudinal feeds: 17Inch threads: (45) 2 - 72 TPIMetric threads: (39) 0.2 -14mmModular pitches: (18) 0.3 - 3.5Dianetral pitches: (21) 8 - 44Longitudinal feed: 0.002 - 0.067 IPRCross feed: 0.001 - 0.034 IPRNumber of cross feeds: 17Tailstock barrel diameter: 1.968"Tailstock travel: 4.5"Tailstock taper: MT #3Floor to center height: 42.2"Height with leveling jacks: 59.06"Feed rod diameter: 3/4"Leadscrew diameter: 1-1/8"Leadscrew length: 59"Leadscrew TPI: 4Faceplate size: 10" (optional)Max tool bit size: 3/4"Steady rest capacity: 5/16 – 4-5/16"Follow rest capacity: 5/8 – 3-1/8"Spindle motor: 5HP, TEFC InductionVoltage: 220V, 3-phaseAmps: 14A / 7ASwitch: magnetic with thermal protectionCoolant motor: 1/8 HP, TEFC InductionLubrication motor: 1/4 HP, TEFC InductionBase construction: Cast ironBed construction: Induction hardened cast ironBody construction: Cast ironHeadstock construction: Cast ironHeadstock gears construction: Flame hardened steelStand construction: Cast ironFootprint: 19.5" x 80.75"Approximate shipping weight: 2684 lbs.
Standard Equipment:Three V-way bed7" 3-jaw scroll chuck w/ D1-5 back plate8" 4-jaw independent chuck D1-5Safety chuck guard with microswitch shut-offSteady rest with ball bearing roller tipsFollow rest4-way tool postComplete coolant systemMicrometer carriage stopSpindle sleeve MT #5/MT #3Two MT #3 dead centersThreading dial indicatorLeveling pads - 8-pcs.NSK or NTN Japanese spindle bearingsFull length splash guardFront removable sliding chip trayTool set & boxOperation manual & parts listYaskawa G7A23P7 inverter