The iVac (Intelligent Vacuum Switch Box) has been designed to conveniently enhance your work shop safety. It eliminates the distraction of turning on and off a dust collection system (DCS) while you are operating potentially dangerous power tools.Set to the “auto” mode... and quickly connected to your power tool of choice… and DCS, the iVac ensures that your concentration is focussed on the task at hand. It automatically starts the system when the tool is activated… and then runs for a further six seconds once you’ve finished… continuing to eliminate any remaining airborne particles in the work space.
The mode switch also allows for the DCS to be permanently OFF... or permanently ON for easy and convenient clean up at the end of the job.Continuous Operation
The iVac has been designed for continuous operation, so whether it’s a quick couple of cuts with the table saw, or an all day project that you’re involved in, you can rest assured the iVac will keep your work area cleaner than you’ve had it before… and all without you thinking about it.
The ‘Turn On’ delay
‘Turn On’ delay of 0.5 to 2.0 seconds helps avoid dual power surges from a DCS and Power tools being simultaneously activated.
The ‘Turn Off’ delay
The ‘Turn Off’ delay of 6 seconds ensures that your work area continues to be cleared of remaining airborne debris even after the tool has stopped.
AUTO / OFF / ON
Three position mode switch, Auto / Off / On.
Two Input Power Cords
Two input power cords allow for the situations when large tools and a DCS require more than the standard 15Amps available from a single residential AC Outlet. Both power cords are protected by independent built-in 15Amp circuit breakers.
Compact & Lightweight
The iVac can also be easily wall mounted if preferred. iVac extends the life of your DCS because it isn’t inadvertently left on even when not required.