Grizzly G1028Z2 - 1-1/2 HP Dust Collector
click to zoom
- Motor: 1-1/2 HP, 120V/240V, single-phase, 3450 RPM, prewired 120V
- Motor amp draw: 12A at 120V/6A at 240V
- Air suction capacity: 1300 CFM
- Static pressure: 9"
- 6" inlet "Y" with two 4" openings
- Impeller: 12-3/4" cast aluminum
- Bag capacity: 5.7 cubic feet
- Upper bag filtration: 2.5 micron
- Portable base size: 21-1/2 x 33-1/2"
- Bag size (dia. x depth): 19-1/2" x 33" (2)
- Powder coated paint
- Height with bags inflated: 78"
- Approximate shipping weight: 118 lbs.
Optional Replacement Bags: G5556 Upper Bag; T20543 Lower Bag
Accessories and Related Items:
You May Also Like:
Customers who purchased this item also purchased:
13 Customer Reviews (4.9 out of 5 stars): Sign in to write a review
My G1028Z2 arrived Tuesday as promised. The crate was in good condition and the driver helped me unload the unit. All the parts were included and it assembled just as described in the instructions. The instructions are well written and illustrated. I am impressed by the finish and fit of the parts. Everything looks right for the job.
When I started the dust collector, I was glad I had not ordered the larger (2 hp.) unit. This one (1 1/2 hp.) has plenty of power and will do everything I need in my small shop. I connected my band saw and was very pleasantly surprised to find NO dust inside the saw after about a half-hour of use.
The G1028Z2 dust collector is a quality product that will improve the performance of my shop.
Thank you for your attention.
I also have a bigger one for table saw and jointer, but this works perfectly with my new drum sander that is in another room. Can't say anything negative, but wish I could find a 6" elbow
I am really glad I purchased this model, it is just the right size for my shop. Cleanup after a project is now minimal. It has the right footprint, power requirements and most important great suctioning power. It was also in a good price range. Instructions to assemble the unit were clear and easy to understand.
This is about the best DC you'll find for the money. It has great power, and the fact that it runs on 120 volts is good for a shop like mine that doesn't have enough 220 volt access. I've hooked it up to my spiral cutterhead jointer to face joint wide poplar boards and had almost no chips left at the cutterhead (this with it pulling through a shopmade separator that is somewhat less than efficient). I would buy it again!
Have had for about 4 weeks now and seems to be plenty of collector for the one man shop. using it on only my table saw right now but planning on installing a system as soon as I have the time
Just put it together and ran it, it is not to load and works great. Can't wait to start my next project. Thanks
Great product, assembled quite easily, all the parts were there. It has very good suction[I have 5 machines hooked to it]. A really great buy.
Easy to set up, quiet, and does the job. Just starting to collect all my equipment after learning woodworking with my father in law for the past two years. This dust collector is a great addition for the newbies like me.
I purchased this machine 1 month ago. It came with all the parts in good condition. It was very easy to assemble and took no time at all. The driver couldn't have been any nicer. I have used it several times and am very pleased with the suction and the ease with which it switches from one piece of equipment to another
So far so good. I am concerned about a youtube video which indicates that the machine tends to trip a breaker when operating the collector at temperatures below the mid 50's. Are you aware of this potential problem?
I bought this product to replace my delta dust collector that died. This has 1/2 HP more at a lower price. The instructions were clear and it took about an hour to have it up and running. It works great and its a lot quieter than my previous one.
Like the product. Be aware that there are extra charges regarding the product requiring a lift gate truck that you're not made aware of until you check out. As such the shipping is more than you think. I did not purchase this because I could get it off the semi truck myself but be aware.\r\n