Grizzly   |  Model: G1035
1-1/2 HP Shaper
Price: $595.00
Recently Added ×
You May Also Like ×

Grizzly G1035 - 1-1/2 HP Shaper

Showroom Pickup
Built with plenty of muscle to take on a wide variety of shaping challenges, our mid-sized, 1-1/2 HP Model G1035 Shaper offers the perfect, low-priced alternative for the serious hobbyist or small-shop owner. Features handwheel for spindle height adjustments, two spindle speeds, a finely milled cast iron table, interchangeable spindles, and sealed ball bearing spindle cartridge—all for less than the price of a router and router table!

CSA certified meeting CAN/CSA C22.2 #71.2-08 and UL 987-7 standards!


  • Heavy-duty motor: 1-1/2 HP, 120V/240V, single-phase, 12A/6A, prewired 120V
  • Precision-ground cast iron table
  • Table size: 20-1/4" x 18"
  • Floor to table height: 33-1/2"
  • Spindle travel: 3"
  • 2 interchangeable spindles: 1/2" and 3/4"
  • Table insert openings: 1-1/4", 3-1/2", and 5"
  • Spindle speeds: 7000 and 10,000 RPM
  • All ball bearing construction
  • Maximum cutter diameter: 5"
  • Maximum cutter height: 2-1/2"
  • Powder-coated paint
  • CSA certified
  • Approximate shipping weight: 221 lbs.

    Standard Equipment Includes:

  • Reversing switch
  • Fence with safety guard
  • Hold-down springs
  • Cast iron miter gauge
  • Steel cabinet-type stand
  • :


    1 Customer Review : Sign in to write a review

    C. Devenport
    Customer Review 1/1/2015

    I am a retired manufacturing engineer who took up woodworking as a hobby nearly 50 years ago. This hobby has served me well all those years as a way to relax while making some useful furniture for our home. I don't do commercial work, but will build about anything my friends or church ask.

    Approximately three years ago I purchased the G1035 Shaper to use in my workshop. Before that I had a router table. The shaper has proven to be very easy to set up and use.

    As you can see in the picture, I have made a larger work surface and dust pickup. The dust pickup is a model G1840 Floor Sweep that I inverted to make a down draft for the refuse and added the removable, yellow hood to help with air flow. I used 3/4" particle board as the base material and to stiffen the table, 1" X 2" braces were added around the opening for the shaper table. The top is covered with Formica« and the edges are 1" X 1/2" oak. The unit comes with spindles for both router bits and shaper cutting tools. I use 1/2" drive router bits for cutting tools.

    Please share this information for use with all of your "smaller" shapers in place of router tables. They have the driven spindle, elevating mechanism, and work surface needed for such a device. With the modifications that were made, it does exceptional work.

    Animation for G1035