Grizzly G0715P - 10" Hybrid Table Saw with Riving Knife, Polar Bear Series
click to zoom
tap to zoom
Free shipping within the Contiguous United States.
Sales of this outlet item are limited to quantity on hand.
Free shipping within the Contiguous United States.
Sales of this outlet item are limited to quantity on hand.
- Motor: 2 HP, 110V/220V*, single-phase, prewired to 220V
- Amps: 16A at 110V, 8A at 220V
- Precision-ground cast-iron table w/wings
- Measures: 27"D x 40"W
- Table height: 34"
- Footprint: 20"L x 21-1/2"W
- Arbor: 5/8"
- Arbor speed: 3850 RPM
- Capacity @ 90°: 3-1/8"
- Capacity @ 45°: 2-3/16"
- Rip capacity: 30" right, 12" left
- Overall size: 60"L x 36"W x 40"H
- Approximate shipping weight: 416 lbs.
- White powder-coated paint on cabinet
- Precision-ground cast-iron table
- Cast-iron trunnions
- 4" dust port
- T-slot miter gauge
- Camlock T-shaped fence with HDPE face
- Easy-glide fence system
- Quick-release riving knife and blade guard assembly
- Knurled knobs for adjusting fence
- Includes regular, as well as dado blade table inserts
- Device on blade guard allows enabling or disabling of anti-kickback pawls
- Poly-V serpentine belt drive
- Includes 10" x 40T carbide-tipped saw blade
NOTICE: *110V operation requires part #T23999 circuit breaker and wiring procedures that must be completed by an electrician or other qualified service personnel. See Owner’s Manual for details.
Accessories and Related Items:
You May Also Like:
Customers who purchased this item also purchased:
100 Customer Reviews (4.8 out of 5 stars): Sign in to write a review
I've had this saw one year. I was going to write a review but it seems pointless as it has been discontinued....
This saw is great! Once you get the table set up it makes the easiest and very consistent cuts. It is quite, easy to adjust, and just feels great when I am using it.
I am very disapointed in this saw. The motor starts and cuts out after a few seconds. When I touch the top of the motor where the start capicator is it is extreamly hot. Have not been able to use the machine.
I am VERY happy to finally own a "real" saw. My last saw was a jobsite Craftsman saw, and it was not capable of making the kind of cuts I can with this saw. I have only cut some 3/4 inch red oak, with an upgraded Freud blade and the cut was perfect with no burning and almost invisible kerf marks... I also purchased a dust collector, Grizzly's G1163P that works great, with almost no dust escaping from the top of the saw. The Shop Fox mobile base was also purchased, because my shop is small and everything has to be mobile. Back to the saw: I watched several videos on YouTube about setting up this saw, most were very helpful--with some repetition. However, I don't know how anyone was actually able to get the wings attached and leveled by themselves. My wife and I were able to get one wing as perfectly flat. I would suggest, changing how the wings are produced so you can use a ratchet to tighten the wings to the table, using the wrench is a little difficult. However, the second wing has just the very slightest light between a straight edge and the table... as my 11 year old grandson pointed out. Still, the gap was way less than a sheet of paper. Using a digital angle finder I tried to get my blade 90 degrees from the table, and after an hour and 10 or more adjustments I have up. So I checked two different squares for squares and used them, and ended up exactly where it started. I think my digital gauge could be off or the adjustment was too small for me to make. I called my brother, a very accomplished professional finish carpenter and he said, "if your square is square trust it." The table was dead on with the blade so I didn't have to adjust the trunnions. Had my table not been parallel to the blade, I think adjusting the trunnions would have been difficult. Perhaps it's time for all these nicer saws to get trunnions mounted to the cabinet. Because of the way my shop is set up I had to run the power cord all the way around the back of the saw to the power outlet, consequently, my cord was about 2 feet too short. So I had to purchase extension cord materials. The owners manual was very helpful and clear with assembling and saw setup. In fact, awhile back I did a test cut using only the ruler attached to the saw to measure the length of cut. I checked the cut against a good different ruler and it was dead on. No problems with the deliver, fit or finish of the saw. Overall, I believe this saw will be an outstanding addition to my shop.
Great experience all the way to delivery! Thanks Grizzly!
I gave this 3 stars not because of the product itself but because of the frustration I experienced during the shipping process. I ordered this saw on May 13, 2017 in hopes that it would arrive on my Birthday May 18. The shipping notice I got from Grizzly said that it would be there on that date. The fence and the rails arrived on that date but no saw when I asked the driver about the say he said that may the say got put on another truck and would either be here later today or the next day. 2 days after that the saw finally arrived and was damaged it looked like they ran the forklift into it, so I called Grizzly and they said they would get a new saw sent out immediately but it would take 3 business days for it to arrive, unfortunately I was schedule to go on vacation during that time frame, so I asked them to ship it out on May 30th so that I would have it on June 1. I did not receive the saw until June 2. Three weeks after the initial order I finally got my saw. It is a great saw once it is setup properly.
had it for a month....upgraded from dewalt and it was like going from a VW to a BMW
I am very happy with my purchase. Table saw is well built and works perfectly. The only con was the rails that fence slide on didn't have good powdercoating. There were imperfections underneath the paint. I stripped both rails and had a new powder coat applied before putting it together. Other then that I am very happy with my saw. Required very little adjustment and works great!
I am very disappointed with the factory settings of my new table saw. The blade is off and all work pieces get pinched and burned when passing the blade. The bevel is factory set to only 43 degrees and the adjustment is nearly impossible to accomplish . Spending this much money I expected a much better quality tool
Just got this saw and it has the blade kick-out issue when you raise and lower the blade. Mine measured .012" different from back to front when the blade is at 3 inches and just over .001" different from back to front when at about .75 inches. Talked to a tech and they informed me that their tolerance for kick-out on this model is .02 inches. .02" kick out tolerance on a brand new 900 dollar table saw.
Absolutely fantastic saw. Relatively easy setup, solid construction. Have had the saw for a few months now, and have used it for a couple of projects. I've cut hard woods (oak), and soft woods (poplar), with zero binding or bogging. I haven't put a micrometer on my cuts like others have at both high and low points of blade extension, but it is certainly accurate (and simple enough to validate) to within less than 1/32".
The only thing I've found curious is the dust collection system -- there is no way to easily secure the hose to the dust port on the saw body. In fact, the instructions for the dust collection kit state that you should use duct tape or velcro to secure the hose. LOL!
I ordered the saw 3 months ago and love it. set up took about 4 hours to get everything square and level. U will need help seting up the actual table. I ordered the moble base with it and it glides smoothly!
I am very happy with my purchase but for one problem. The saw is billed as a 110/220 wired for 220. There is no warning to tell you that this will not work on most residential 110 volt circuits which are 15 amps. Not being an electrician, I did not realize this when I bought it. I thought the 20 amp circuit breaker would take care of this. I had to have an electrician install a new circuit. Since the difference between installing a 110V 20 amp circuit and a 220V 20 amp circuit was minimal, I had him install the 220V circuit. It cost me 500 dollars!! I think you need to put some more obvious warning that this saw will not work at 110V in most houses.
Replaced an old (but great) Craftsman contractors saw with this one. Wow, what an upgrade and for about half the price of other similar saws. Really well made and everything is heavy duty. I added a cast table extension from my Craftsman and had to drill a couple of extra holes in the new saw but it's now another 15" wide and fit perfectly. I'm 6'6" tall so made a 4" x 4" base to set this one. I really like the height now and the saw is very stable. Blade was within .002" being square out of the box and I had no problem squaring the fence. this saw is very quiet and I don't have to measure blade distance from the fence as the fence ruler is perfectly adjusted. What a pleasure to use!
Having one problem when using the T fence its to high and the piece your cutting runs on top of the nylon glide pin that sets on top of the slide haven't call support yet to see if there is a solution checked to make sure the Rails were down all the way on the front and back.
I like this saw. For the money it's a great deal. Assembly wasn't bad but the issue with the blade deflection is still a concern. At any blade height other than fully raised the blade comes out of square with the table and riving knife. I'm sure there is an adjustment to this but I haven't been able to figure it out.
I have been using this saw for a few months now cutting oak, walnut, alder, It is working flawlessly. A very good purchase and I am looking forward to an upright sander and a vac system soon.
Best Regards, Doug
I had done the research and I knew that getting this saw for my first table saw was going to be a good choice. Setup was simple and tuning and aligning everything was a simple task. For me this is as accurate as i could ever need which is very accurate. Grizzly is definitely on the XMAS list this year for more awesome tools by the BEAR!!!
All that said, a side note to everyone. I had this delivered to my work and then had to get it home. For all of you out there with a KIA Van, It fits just fine, box and pallet no problem LMAO. If i had thought of taking a picture, i would have.
It's the third tablesaw I've owned but the first hybrid/cabinet saw I've owned. I simply love it. I do wish I had a little bit more power though but perfect for my home shop.
I have been using my GO715P saw for almost 2 months now and have completed several projects with it. After dialing in the accuracy, the saw cuts beautifully. I have cut 4x4's on it with no problem. The cam-lock HDPE fence is probably the best part. Accurate repeatable cuts. My setup is 240v so I don't know if there is a noticeable difference with the 120v setup. There were several parts missing in the original package but after speaking with customer service (they were actually pleasant to talk to) parts were sent right away with no charge. I have 2 suggestions to improve the saw. 1.) The saw should have a way to level the base. The concrete floor in my shop is not perfectly level so it had to be leveled by shims. 2.) Inside the saw cabinet has gaps near the dust collection port allowing some loss of suction when connected to my dust collector. I seal them with tape but it would be better if the cabinet was as sealed as possible already.
Once you true this saw up, "smooth sailing". Very accurate and well designed. Should last a very long time.
Best decision i ever made along with heavy duty Drill Press and hand tapper! I am in the process of retrofitting Alan Littles Ask Wood Man Aluminum extruded fence!
Very happy with this saw. It is now the center of my shop. Impressive quality for the price.
Great machine, I am using it as dedicated for dados. Only drawback, the cord is too short. I had to convert it to 110V so I replaced the cord with 15ft one and it is working great. Dead on out of the box no adjustments were needed. Very happy.
I bought this table saw a few months ago to replace my old craftsman. What a difference it has made. The fence is square when I lock it down and dead on the mark. There's plenty of power even when making dadoes. The only issue I've had with this saw is with the dado insert. There was a bit too much paint for it to fit into place. I just took some sandpaper and removed a little of it to make it for. Thanks grizzly for making a great saw at an affordable price.
Blade alignment was perfect out of the box. Fence is fantastic. Great packaging. It took me as long to run 220 power as to unpack and set up. This saw is being replaced, hope the new one is this good.
Finally decided I'd lived with a contractors saw long enough, and after lengthy research made the move. Should've done it sooner. A wonderful machine in every respect; solid, powerful & accurate. With the optional miter gauge, Forrest blade & zero clearance insert I'm in workshop heaven!
Purchased this saw about 3 months ago and have been working with it almost daily. I have to admit that I was skeptical at first considering the low price when compared to other quality table saws but this is one amazing product. It did require some setup but thats to be expected even with the $3,000 units but after the necessary adjustments the saw has been spot on. I did wire it to 220 rather than 110 because the power was available.
I saved up and read all the reviews, then decided on this grizzly hybrid. Glad i did! It was easy to set up and cuts square and true right out of the box. Great product for the money!
Great machine for what i need it to do. Well built and accurate. Power cord is too short
I have been wanting a quality saw my whole life. If I were to write a note to my younger self, I would tell myself to buy this Early in life, not mid way through! So much more could have been done if I'd have had this saw years ago! Don't put it off, get one Now!
Just finished assembling it, everything is right on. Decided to stay with the 220volt. Electrician coming in next week to put in wiring and outlet.
The instructions for set up of the saw was excellent The best I've ever seen. I didn't need to adjust the trunnions at all. I would recommend this saw to everyone.
I cant imagine a better preforming saw for the money. Alignments were all checked and the only thiythat needed teeeking were the 0 and 45 stops in the tilt leadscrew. Very flat table and cast iron wings. Wired for 240 motor has plenty of power for whatever i feed it. The dado insert included make it an even better value.
Worked great...mounted flawlessly! Wouldn't be able to do fine cuts without!
Love it. Cuts like a dream. This is my first cabinet table saw, but I am so glad I made the jump from the portable models. Great product, great support from Grizzly too.
I bought this saw about a month ago and couldnt be happier with it. Set up and assembly were much easier than i expected. So far this saw hasnt run across anything it couldnt cut through with ease. Easily the best table saw ive ever owned. Im so pleased with it i cant wait to upgrade something else in my shop to a Grizzly
got here fairly fast works very good glad I got it.
For 6 months i went back and forth on what table saw to buy for my small woodshop. I looked at and compared just about every saw on the market. Finally i took the plunge with this table saw, And i am VERY pleased i did. Set up and assembly was a breeze. Every thing is very accurate as well. The saw makes excellent cuts! I highly recommend this saw!
I have been running this saw for almost 3 months now. I can only say good things about this product and company so far. I took the time to really dial the saw in during assembly. Even with my OCD, I have grown completely comfortable with the saw and fence always being square after using it on the first few projects. Smooth running and hasn't slowed down on anything I've thrown at it so far. My main reason for writing this review isn't for the saw, but for the way Grizzly has treated me so far. There was a minor issue during shipping that wasn't the company's fault. It only took one call and they handled everything with no questions asked. I will be ordering future machinery from them.
For the money, this saw is a complete masterpiece. Setup was east and quick. The fence system is much better than I thought it would be, I almost purchased a new fence for the saw before it got here, I'm glad I didn't. The fence is perfect. This thing will cut through anything that I have tried to cut, hardwoods are a breeze. I absolutely love this thing and have bought two other
Grizzly products since the saw. I am a Grizzly fan!!
I have used this for about 9 months now and I like it a lot. It has an accurate fence, which is what my old table saw lacked. I made a YouTube video setting it up. Check it out.
I purchased this saw a couple of months ago after several comparisons and good reviews. The saw was shipped on freight and arrived without issues. I also use 220 power, but rewired a longer cord. However, getting the Fence and blade parallel was difficult. I used a dial indicator to check the blade and had substantial play when i raised it from 2 inches and higher. I did read online on several forums regarding this issue. Anything below 2 inches, the blade was perfect. Additionally, setting up the fence was a pain in the butt. Don't know if its a defect or my error, but when cutting 3" or higher, the blade bogs down and i have to push hard to make the cut. The only way to remedy somewhat this, was to remove the riving knife. I would imagine that 2 hp was enough power. Otherwise, the saw is quite and smooth when cutting thin stock. I have contacted Customer Service and they recommended a few adjustments. I will advise more later after making the adjustments.
It is a great saw I have not had anytime to use it yet but my son has and he likes it. The only complaint I have is it is made in China when
I ordered it I thought it was made in Tawian like the other tools I had bought from you, if this continues I will not buy from you.
i bought this saw several months ago. It took a couple of hours to get the saw and fence completely set up and squared up. The saw runs great, cuts great with no vibration whatsoever. The blade that is supplied is good for getting used to the saw and that is about it. I replaced the blade with a forrest blade for finish cuts on projects but mainly use a dewalt blade for everyday use. I would like to see the option for a 52 inch fence system for this saw other than that I have no other complaints. Great saw for the hobbiest like myself.
I.v been wanting one this for a while and I'm making sawdust .will be order some more soon
This is a great saw and a great addition to my shop. I love it. it's true, it's accurate and it's powerful. Thank you, I will be back
Recently received this saw as a Christmas present and, so far, am very pleased with it. Fit and finish is generally very good and it comes with a couple of nice surprises like a blade and push stick.. Also cuts very well - the 2 hp motor seems just fine. And what a value at comfortably less than $1000 delivered. A few minor points:
1) Holes on some of the cap screws that attach the wings to the main table were filled with some sort of hard substance. Had to put them in a vise and use a hammer and awl to chip them out so I could insert the hex key to tighten them.
2) Understand the concern about power drop but the cord is too short. A modest couple extra feet would be nice.
3) Assembly documentation is occasionally confusing and the photos that accompany the text are too small and unclear to be of any help.
4) Would have been nice if a couple of hooks were supplied to hang the miter gauge, push stick, etc. on. Easy enough to install yourself though.
The Table Saw arrived UPS ground and in good shape, along with the 14 inch Band Saw and six inch tabletop joiner. Everything was packaged well. every piece of equipment is together and working as described. I am happy with the purchase and looking forward to increasing my shop with Grizzly tools.
Look around do you see anything but 5 stars? Makes you wonder about a company...
I purchased this saw as a final upgrade to my woodshop
I had a bit of a problem with the setup
The rails for the rip fence have to be high enough to allow you to adjust the height of the fence away from the tabletop
My first setup caused the height adjustment to stick up above the table
After lowering the fence rails I was able to set the fence height and the adjustment screw was below the surface of the table
Seems to be well made and everything is staying in perfect adjustment
I used a dial indicater to check the parallel of the blade with the miter slot
I did have to adjust that a bit
Cuts as close and as accurate as I will ever need
I would highly recommend this saw, and would purchase again
So far I have not had any problems with this product and would recommend this to anyone.
I have waited nearly 40 years to have a heavy duty table saw and my Grizzly is everything I ever wanted. I am AMAZED at how quiet it runs and how fast it can take the wood. Can't go wrong with this saw!!!
I like the saw but I'm having trouble with the fence. If I could get help
Yes I am 75,I should have bought this saw 20 years ago.its a great addition to my shop. I love knee off switch. Bob Keilholtz
I'm so glad I got my husband this saw.
Since it arrived, he's been in his woodworking shop and out of my hair.
I just got power to my saw and couldn't be happier with it. It's incredibly quiet and cuts without any strain. Only problem I've been having is with the riving knife. I need to dig into it a little more to see if it's the blade guard or the fence.
Very happy with this saw. I believe I've got My money's worth. Easy set up and plenty of power. You will need the mobile base if you have move things around like me
Bought this saw to replace a 30 year old Craftsman that served me well all those years even with a fence that was hard to keep aligned. The Grizzly has so many new features that I love - the riving knife, dust collection port, totally accurate fence, etc., etc. Just a couple of things that give me some annoyance. The power switch way over to the left is very inconvenient for me. Would love to have had a secondary set of screw holes under the fence guide just to the right of the blade position as an option for the switch position. I typically lay my wood piece on the saw, hold it down with my left hand and reach to the right to power the saw up. As a right hander I am much more adapt at finding that switch with my right hand. Also the fence ruler and sight window are annoying. The ruler could be more legible - my Craftsman ruler had a yellow background and bigger bolder markings. Plus the sight window has a cut on the bottom side instead of just a line. That cut distorts the reading. My son has a full sized Grizzly cabinet saw he purchased a few year ago. It has a much more readable ruler, a line in the sight window instead of that cut, plus it has an option to move the window to the left side of the fence - a much preferred location for me. I am seriously considering making a few mods to the power switch location and the ruler/sight window - or do you guys offer some optional parts to make said changes that I'm not aware of. But all in all it is an excellent saw.
I bought this to replace a 20 year old craftsman table saw and it is 3 times the saw with lots of power. This saw is easy to setup and it is very accurate...safest saw that I have ever owned.
I am quite happy. I only wish I had read of the availability of a longer set of rails. So far, I am quite happy with it and am now trying to build an extension table for it and install a router on it. I also want to connect a side table for larger work.
I bought this a couple of months ago and have used it several times. It is a great saw for the price. It is very easy to set up and gives me extremely accurate cuts.
I just wish I had bought it years ago instead of struggling with my old saw.
Only complaint I have about this saw after two years is that the power chord is too short. It comes at 6' in length and I am thinking 8' or maybe 10' would be better in most situations Not everyone has a floor outlet at their disposal.
This table saw has been in my shop now for several months and delivers precision table saw performance every time I cut it on. Honestly, comparing apples to apples...brand new saw to brand new saw, there is nothing that comes close to this saw for under a $1000 delivered to your door.
One of the the biggest negatives that this saw and other saw like this get is that the cast iron trunnions are mounted to the tabletop and not the cabinet. I am not an engineer but mounting the cast iron trunnions to the extremely heavy and solid cast iron top doesn't seem to be a bad idea in my book. Following the instructions, this task is simple and once you get the blade squared perfectly to the miter slots....bingo your done and most like will never have to make that adjustment again.
Now lets talk about the saw. First off the 220v 2 hp motor....for your average woodworker, this is all you will ever need. The motor is very powerful, quiet and with the weight of the saw it is rock solid with very little to almost no vibration. The hand wheesl that lower and raises the blase and tilt the blade are silky smooth and out of the box the 90 and 45 stops were dead on. Now for the fence. Again, following the instructions the fence was pretty easy easy to set up. Once installed and set up correctly, it moves almost effortlessly and locks solidly in place once you get it were you want it. The power switch is located to the left with a paddle style stop lever and a locking pin so it can't be accidentally turned on when not in use.....this is a nice feature to have being I have a young one in the shop with me every once in a while that likes to push buttons. This saw also features a riving knife and a fairly nice blade guard too. All in all, a rock solid saw.
So for less than $1000 delivered to your door you get a powerful, quiet, smooth running 2 hp motor, incredibly smooth turning adjustment wheels with accurate stops, an accurate easy to use, solid fence, and some nice built in safety features. Honestly, what more can you want? Oh, and the fit and finish just as every other Grizzly product I own is perfect.
One thing I do recommend is that if you don't already have them, get yourself some nice set up tools ei.....36-48" precision straight edge, digital angle gauge, and a nice digital or dial indicator with a shop made or bought miter slot jig so you can square the blade as perfectly as possible. These tools making set up a breeze and will last a life time. I think many products/ machines get poor reviews due to poor set up. But I can tell you, properly set up, this table saw will do more than what most woodworkers need and save you a lot of cash too. Plus, Grizzly probably has the best customer service department bar none!
I've been a professional woodworker for over 25 years and have owned 3 very good tablesaws. A Delta Unisaw, a Ridgid contractor saw, and now the Grizzly 715P. For the money, this saw is by far the better of the three. It went together clean and square right out of the box. It is very heavy making it vibration free. The Biesemeyer-type fence is smooth and very accurate. If anyone is looking for a high quality, low cost saw, this the one for you.
This review is more about Grizzly than the actual saw.
I ordered a G0715P a few weeks ago. The shipment was tracked, shipped, and delivered ahead of schedule.
Regrettably, there were some parts that were defective requiring the machine to be returned.
I am in the service industry, and the mark of a true quality company is how they react to a customer's problem. And I will always feel truly comfortable doing business with this company based on how they handled this glitch.
They responded very quickly. There was a bit of confusion early on, but I want to commend all of the Grizzly staff for always being polite, and genuinely concerned for my satisfaction. I especially want to call out Justin, one of the managers.
Honestly, I just today received my replacement saw in perfect condition. I will comment on how the saw works soon, but, and I'm not a shill for the company, the company itself is a stand-up operation in today's world of so many, less-customer oriented companies. If you like these products, the company backs them!
Very happy so far, had a small problem with a glide pad on the fence & Grizzlys great customer service has one on the way. Everything was lined up out of the crate. First cut was some 3/4 birch plywood scraps I had handy, not a single splinter on an 8` cut with the factory blade. A lot of the accessories for Grizzlys top line saws with the "shop fox" fence will not work with this hybrid but in my case this is not a big problem. The spacer at the end of the miter bar will need to be filed before you scratch up your back rail.
Ill keep it simple. Bought a few months ago. Have built cabinets, doors, trim work and so on with this saw. Purchase the dust collector as well. The combo is amazing. Still not dure why anyone would pay more for another saw. Very happy and will continue to buy grizzly products. Their customer service and support are amazing too.
Been using this saw for about two years and am as happy as a clam at high tide. I customized mine with a Freud LU83 10" 50T blade, a right wing replacement router table and an Incra LS-III rip fence with an Incra Miter1000 miter gauge.
This combination can both rip and crosscut to any 1/32" +-.002" with no fiddling or 'ginching'.
Great tool. Was perfect out of the box. The 90.0° and 45.0° stops were dead on according to my Wixey angle gauge.
For the last several months, I have been agonizing over which saw to purchase. I wanted a powerful saw, but also one that would cut accurately, and safely. To be honest, I did look at many other brands.SS was one such saw, I did like the feature that it was nearly impossible to cut off a finger while using it, however, it does come with many hidden catches that if you do not do your research on, you will end up spending a lot of money just operating the silly thing. I read reviews here, about this saw, and was a bit nervous about the set-up, it appears a lot of men had a hard time setting up their saw, and I really did not want to go through nightmares setting up a saw. I purchased a rotocator to be certain that I was setting this up to exact tolerances. I have to say that setting this saw up was hassle free, other than I was the only one on location putting the saw together. Honestly, an extra set of hands would have came in handy while putting on the table extensions! But, I managed and was able to get everything level. Now the hard part was coming..so I thought. Making certain that the miters were going to be perfect with the blade alignment. I dreaded having to loosen bolts, tap the trunion to get things lined up. I set up my gauge and like something out of a miracle, this was set from factory to exact, and I do mean exact tolerances. I seriously doubt this happens every time, but it did for me. The saw is relatively quiet. The only drawback I found was the power cord is really not that long. I made my own extension cord out of 10 gauge wire and kept it at only 15 feet. I did take the motor cover off, and in the bottom of the saw where the saw dust would fall before going out through the vac chute, I took duct tape and went all around the bottom of the saw to prevent fine saw dust from filtering through the bottom of the saw. Other than that, I am extremely pleased with this saw, and the money I saved by buying this saw as opposed to the SS saw, I was able to put towards the purchase of other machinery, Grizzly of course..for my small garage work shop! I recommend, that if you too are struggling with a decision, stop struggling, get on line, and order this saw today. You will not be disappointed in any way at all!
I had some doubt about the saw reading reports of the blade misalignment. However after watching numerous videos about it I failed to find a single one where a user error was not the reason of the problem. People either raised the blade beyond what is specified and then tried to force some more in which case the blade would naturally deflect. Or expect the blade to be perfectly aligned while being raised/lowered. The fact that the blade immediately returns to the zero position after the tension is released did not prevent them from crying foul.
So the saw arrived today and I rushed to test the blade alignment before doing anything else. I must say I was pleasantly surprised with what I discovered. The front of the blade stays put on without the dial indicator even budging, when I lower or raise the blade. The back of the blade does deviate to the left or right depending on whether I raise of lower the blade but not more than about 0.007â€ or so. When I turn the raise handle back a quarter of one rotation to relieve the tension it goes back close to the initial point. I my books it is perfect.
Operating elevation and tilt handles is an immense pleasure. The cast iron handles are heavy and the motion is very smooth. It is incomparable to the saws with aluminum handles.
The VERY oversized power switch with a dedicated ON button, seems to be much safer and convenient to use than regular switches that you have to pull to turn on.
The table finish on G0715P is very good and the table is very flat. I did not measure specifically but I could not see light between the table top and a straight edge, with exception of the right near corner where it still was very negligeable. I did not shim the extension wings. This saw has a table mounted trunnios, which many do not like "because it is more difficult to tune them". However you do not adjust the trunnions every day (if ever) and the table mounted construction is far more ridig than the cabinet mounted because there are more parts in between in the latter case.
The fence on this saw is very impressive. It is a large step up from contractor saws you see in the similar priced contractor saws in big box stores. It slides very well and stays square.
My recommendation buy it ! Woodworking is not my day job, just a hobby so this saw is far more than I need. I guess even for a low volume shop it still would be adequated.
I have had this saw in my shop for 2 years now and it is a excellent machine. No problems, runs perfect. I only thing I would like to see come standard with the saw is the mitre clamp even if the saw cost a few dollars more.
My dust system wasn't strong enough to pull the dust from the saw so I modified a dust system with thin sheet metal and works perfect.
Great saw as my other Grizzly product are.
I purchased this saw about 2 months ago, picked it up from the springfield location, its about a 3 hr round trip from my location.
my reason for the purchase was I wanted a more accurate saw, allowing better cuts, once unloaded and in my shop I began set up, using a dial indicator I soon discovered the blade and mitre slot were quite a bit out so as per the manual I removed the rear access panel and loosened the rear trunnion bolts, adjusted them but was still out of parallel more than I could live with, so as I was at the limit of travel with the rear trunnion I moved to the front bolts, but soon discovered there was no adjustment possible as the front trunnion had holes verses slots, so no movement possible, let me say the help desk were pretty good, they suggested taking a file to the trunnion holes and filing them out.
so I cradled the whole assembly with my engine hoist and removed the front trunnion filed both holes into slots and put everything back together, that did the trick now the saw is spot on!
My next issue was the cast mounting plate for the riving knife and saw guard had not been ground at a 90 degree angle so if I aligned the bottom of the blade with the knife the top of the blade would be out and vice versa, tried shimming it but with no luck, I ended up taking the piece off and ground it on my disc sander and that fixed that problem.
So my conclusion is a lot seem to have been lucky with there purchase but be prepared to do some headscratching and be ready to dive Iinto some machining with this one, A word of warning! As I figured removing one trunnion would cause the whole casting to slip out of the other remaining trunnion I slung the whole thing in straps to my engine hoist, just in case it did, and yes it did! So without my precaution the whole thing would have crashed down into the cabinet, so with hindsight it might be better to flip the whole saw onto its lid and then work from below.
So its been a few months now and I love the saw despite the teething troubles at the beginning
i started out in my wood working with a little contractors job site saw, smaller than this one and much less powerful. march of this year i bought this saw as an upgrade. realizing that my new saw was going to be more powerful and bigger than my old one i fully expected it to be much louder as well but i was very pleasantly surprised at just how quiet this beast is. i have thrown a lot at this saw so far and it has taken all of it without hesitation. to say i am happy or satisfied with my purchase is an understatement. my only regret is not upgrading to this saw a few years ago.
This saw is awesome! It just came today and went together easy as can be expected. All of the alignments were great right out of the box and everything works like butter! The saw is very quiet and smooth running. I work full time for a high end custom cabinet shop and this saw feels like it would be right at home there, but this one stays with me. Everyone at grizzly was fantastic! Thanks for a great product at a great price!
I bought this saw a year and 2 mos. ago. Very easy to assemble and its cuts are accurate. I added a digital readout on the fence and discovered a whole new world of repeatability.
This review is totally positive but full disclosure. After the saw was out of warranty just by 2 months the ON/OFF switch failed. Not wanting to be without a saw for long I ordered a new switch right away. I opened the old switch thinking I could clean a dirty contact. To my surprise there was not a speck of dust inside. The problem was the contact was completely burned away. It is a 2 pole switch with poor contacts. A bad contact will work but it will heat up and quickly fail as it did. No real remedy. Just a heads up.
Bad luck on my part. I have several woodworking friends with the same model of saw for over 5 years without problems.
Seven months ago I built a dedicated home wood working shop; small but efficiently laid out. First on the list was an upgrade from a contractor saw. Like a lot of folks, I agonized over my decision, price, capabilities, image, and in my case, a need to have at least some mobility to accommodate different size projects in my shop -a true cabinet saw just would have fit. I looked at lots of used saws, but decided I would "take a chance" on a new Grizzly. I bought precision set-up tools, a dial indicator, etc. The saw went together per included instructions. I mounted a new WW II blade and powered it on....what a beautiful sound! I still enjoy working with this equipment and check my alignment regularly, but it's always right on and my projects have been going together about as perfectly as one could wish for. I have since bought a G0490 jointer. From the start I was glad I went for the 8", 6" just isn't enough. Again I bought set-up tools, a 50" REAL straight edge which is absolutely essential, and it's been a real lesson in humility setting up a jointer even with a parallelogram. BUT, it"s right-on now and making raised panel doors that even amaze me, as well as other projects that friends and neighbors are equally amazed at. All I can say is that everyone from the order folks, customer service, technical folks who took as much time as needed to answer questions, etc. to delivery has been a very good experience. Thank You!
And for all of you that are agonizing over your decision like I did for a PM, D, or SS, you will be pleased with Grizzly and you will save enough money to buy something else!
Common Questions and Answers about the G0715P:
What do I need to convert this machine to 110V?
First, review the circuit requirements in the Owner's Manual to make sure you have the appropriate 30A, 110V power supply circuit and wall receptacle installed in your shop. Converting the machine to 110V requires: (1) disconnecting saw from power supply, (2) removing existing power cord with 220V plug, (3) reconfiguring wire connections inside the motor junction box, and (4) replacing power cord with one that has the appropriate 110V plug and meets the required specifications detailed in the owner's manual. CAUTION: To reduce the risk of electrocution or fire, only an electrician or qualified service personnel should perform this procedure.
Can I install an H8875 or G1317 Roller Extension Table on this table saw?
Although it is possible, installation is made much more difficult by the box protruding from the rear of the cabinet, near the top, where the roller-table top mounting bracket plate must attach. Some determined customers have worked around this by making an adapter/spacers out of wood, attaching those to the back of the cabinet, and then attaching the roller-table mounting bracket plates to the wood adapter/spacers.
What are the main differences between the G0771 and G0715P hybrid table saws?
The main differences between these two models are: the fence system, the blade guard/riving knife design, the miter gauge, overall heft or weight, and pre-wired voltage. Otherwise, both machines offer 2 HP motors and have similar features, table sizes, cutting capacities, and standard equipment. The G0715P is pre-wired for a 240V power supply but can easily be rewired for 120V. The G0771 is pre-wired for 120V but can easily be rewired for 240V.
What is the difference between the G0715P and G0771 fences?
The G0715P uses a classic T-shape fence system that is equipped with HDPE fence faces on both sides and locks against the front rail on three sides, using a camlock lever handle (the same fence system used on our G0690/G0691 cabinet saws). This fence system lifts off easily and features multi-axis adjustment screws for high-precision calibration to the blade, which is what controls the cutting accuracy of the saw. The G0771 uses a front/rear locking fence system that is equipped with T-slots on both sides and the top for easy attachment of aftermarket or shop-made accessories, such as anti-kickback board buddies, featherboards, special-purpose fence jigs, etc. Unlike some front/rear locking fence designs, the G0771 fence can be lifted directly off the rails when in the unlocked position--just as easily (if not more, due to its light weight) as the G0715P fence. The G0715P fence will also hold aftermarket or shop-made accessories, but attaching them usually requires clamping or removing the HDPE fence faces and using the mounting holes for securing.
What is the difference between the G0715P and G0771 blade guard/riving knife designs?
The blade guards and riving knives on both of these machines perform the same function. The difference between the two mainly has to do with the appearance of the blade guard and the mechanisms used when swapping the riving knife with the blade guard spreader. Both setups allow the riving knife and spreader to be quickly swapped without requiring any additional tools. Additionally, both setups allow the anti-kickback pawls to be locked in a retracted position and allow the riving knife to be adjusted in alignment with the blade.
What is the difference between the G0715P and G0711 miter gauges?
The main difference between the miter gauges included with these saws is their appearance, handle, and lock-release mechanism. Otherwise, both miter gauges are made from cast aluminum, can adjust from 90 degrees to 45 degrees (left or right), and have adjustment stops to quickly allow you to set the angle of the miter gauge with repeatable accuracy. The lock-release mechanism on the G0715P is a spring-retractable knurled pin that must be pulled out in order to clear the positioning stops. The lock-release mechanism on the G0771 is a simple thumb lever that must be depressed in order to clear the positioning stops. Although more people tend to prefer the lock-release mechanism on the G0771 miter gauge, more people tend to prefer the larger handle on the G0715P miter gauge, so one miter gauge really doesn't have an advantage over the other.
The G0771 and G0715P are nearly identical in size and features, so why does the G0771 weigh almost 100 lbs. less than the G0715P?
The main reason for the weight difference is that the G0771 uses aluminum components (e.g. fence, rails, handwheels, blade guard frame) in many places where the G0715P uses steel (fence, rails, blade guard frame) and cast-iron (handwheels). The trunnion castings and table components on both machines are constructed with cast iron and are nearly identical in size and heft.
General Questions and Answers:
How do I know which size of motor I'll need for my table saw?
Assuming the correct blade is installed for any specific type of cut, the answer primarily depends on these three factors: (1) your average stock thickness, (2) your typical wood type or variety, and (3) your anticipated cutting frequency or overall demands placed on the saw. First, it is important to note that with a slow enough feed rate, any of our table saws can cut through a piece of hardwood up to that saw's maximum cutting height. Unfortunately, using too slow of a feed rate can result in burn marks in your workpiece, and using a feed rate that is so aggressive that it causes a motor to bog down will quickly increase the motor's internal temperature to a state of thermal breakdown. Once a motor reaches this state, continued operation (without allowing sufficient cool-down time between cuts) will result in the motor becoming so hot that its winding insulation will completely fail and the motor will die. A larger motor, however, could easily perform the exact same type of work without ever reaching a state of thermal breakdown. With that in mind, your goal should be to select a motor size that will handle the majority of what you'll be cutting on a regular basis, without bogging the motor down. To translate this into a more practical perspective, generally speaking, a 1.5 HP motor used with an aggressive feed rate can repeatedly cut 6/4 (1.5") soft woods and 4/4 (1") hardwoods without bogging down. A 3 HP motor, on the other hand, can repeatedly cut the same type of stock with the same type of feed rate at approximately twice that size without bogging down.
What are the differences between contractor, hybrid, and cabinet saws?
A "Contractor" table saw is generally a light-duty saw with an open-stand and is usually equipped with a 1.5 HP to 2 HP motor that can be operated on a common 120V power supply, making it portable and convenient enough to take from jobsite to jobsite for carpentry work, trim work, and small cabinetry or furniture work. To keep the weight down, contractor saws often use sheet-metal wings instead of cast-iron wings, and their trunnions and other internal components use less cast iron or steel, making them much less beefy than those same components used in cabinet saws. A few other typical hallmarks of contractor saws are non-enclosed motors (making them slightly louder and sometimes resulting in a lack of dust collection) and trunnions mounted to the bottom of the table instead of the cabinet (making them slightly more difficult to align the blade to the miter slot or fence). The lighter-duty components used in their construction typically means that contractor saws also cost less than other saw types. The low cost, high portability, and convenience of operating on a 120V power supply, combined with included fence systems that often rival those used on cabinet saws, has historically made the contractor saw a favorite option for the hobbyist or beginning woodworker. A "Cabinet" table saw is a heavy-duty saw with an enclosed cabinet-style stand and usually a 3 HP or larger motor that operates on a 240V power supply, making it the top choice for professional woodworkers, serious amateurs, or production shops that require day-in and day-out reliability and the ability to regularly cut thick hardwoods. Unlike contractor saws, cabinet saws have much thicker castings for the trunnions and arbor assembly, which attach to the cabinet instead of the table (making blade alignment adjustments easier), and they usually have full cast-iron wings, which combined with the beefier trunnions and heavy cabinet stand, give them a lot more vibration-dampening weight. Additionally, the enclosed cabinet stands result in quieter operation and usually have much better dust collection. A "Hybrid" table saw is a newer category of saw that is considered to be a cross between a contractor saw and a cabinet saw. Like cabinet saws, hybrid saws typically have cabinets or stands with enclosed motors (providing quieter operation and easier dust collection) and trunnions that mount to the stand (making blade alignment adjustments easier). Like contractor saws, hybrids are generally constructed with lighter-duty components and materials (keeping costs and overall weight down), and they are usually equipped with 1.5 HP to 2 HP motors (allowing them to operate on a common 120V power supply). Because hybrid saws are often priced near contractor saws and they offer many of the additional benefits that cabinet saws provide over contractor saws, they are quickly becoming the saw of choice for the serious hobbyist or the professional woodworker on a budget.
How do I know what type of blade I should buy?
Blade choice is determined by the type and purpose of cut, hardness and thickness of stock, and desired trade-offs between cutting speed versus cut quality. Generally speaking, a blade with fewer teeth cuts faster but makes a lower quality cut, and a blade with more teeth cuts slower but makes a higher quality cut. We offer a wide variety of blades from a handful of different manufacturers. All of our blades are clearly designated by either blade function, cut type, or material type.
What is the purpose of the riving knife?
The riving knife is used for non-through cuts. It is a metal plate positioned in alignment behind the blade to prevent the newly-cut workpiece sides from pinching on or pushing against the backside of the blade and causing kickback. The riving knife also acts as a barrier behind the blade to reduce the risk of hands being pulled into the blade if they are positioned incorrectly when kickback occurs.
Can I still use my table saw without connecting it to a dust collector?
Yes, but we don't recommend it. Without using a dust collector, the dust will quickly pile up inside and around your machine, resulting in additional cleaning time later. Besides making a mess, fine dust can be harmful to your respiratory system. A better choice is to connect your table saw to a properly-designed dust collection system that at least pulls the recommended minimum CFM for your saw's dust port.
Can I cut metal or other non-wood materials with your table saws?
Although our table saws will physically cut many different types of materials, they are only designed to cut natural wood or wood-based materials (plywood, MDF, OSB, etc.). Cutting materials not intended to be cut on a woodworking table saw can result in serious injury to the operator or bystanders, and it could decrease the life of the saw and void the warranty.