Grizzly G0833P - 10" Hybrid Table Saw with Riving Knife, Polar Bear Series
click to zoom
tap to zoom
Free shipping within the Contiguous United States.
Sales of this outlet item are limited to quantity on hand.
Free shipping within the Contiguous United States.
Sales of this outlet item are limited to quantity on hand.
- Motor: 2 HP, 115V/230V*, single-phase, prewired to 230V
- Amps: 16A at 115V, 8A at 230V
- Precision-ground cast iron table w/wings: 27"D x 40"W
- Table height: 34-1/4"
- Footprint: 20-1/2"L x 19-1/2"W
- Arbor: 5/8"
- Arbor speed: 3850 RPM
- Capacity @ 90°: 3-1/8"
- Capacity @ 45°: 2-3/16"
- Rip capacity: 31-1/2" right, 11-3/8" left
- Overall size: 62"L x 39"W x 47-3/4"H
- Approximate shipping weight: 416 lbs.
- White powder-coated paint on cabinet
- Precision-ground cast iron table
- Cabinet mounted trunnions
- 4" dust port
- T-slot miter gauge
- Camlock T-shaped fence with two-position extruded-aluminum face
- Easy-glide fence system
- Quick-release riving knife and blade guard assembly
- Knurled knobs for adjusting fence
- Includes regular, as well as dado blade table inserts
- Device on blade guard allows enabling or disabling of anti-kickback pawls
- Poly-V serpentine belt drive
- Includes 10" x 40T carbide-tipped saw blade
NOTICE: *115V operation requires part T23999 circuit breaker and wiring procedures that must be completed by an electrician or other qualified service personnel. See Owner's Manual for details.
Accessories and Related Items:
You May Also Like:
Customers who purchased this item also purchased:
38 Customer Reviews (4.8 out of 5 stars): Sign in to write a review
I love it, well built, solid table, really great professional fence. Easy to put together. Mine was missing the nut and bolt package, customer service was quick and responsive.
I bought this saw about a month ago, and I am not disappointed at all. After getting the fence set up exactly the way I wanted it, it stays true, and is accurate. Iâ€™ve never been able to use the tape on any saw before. Itâ€™s perfect on this one. The motor is smooth and quiet. All I really hear is the blade whistling in the air. It also suits my needs as far as power goes. I just ripped a 2 1/2â€ thick board of Birdseye maple with ease. I was expecting a little trouble, but I have no complaints. I own a grizzly table saw, band saw, and jointer. All of which I would buy again.
The product arrived damage free. The delivery man was very helpful. Assembly was facilitated with the manual you sent. I ran into a couple of problems that I'll discuss later. Everything ( parts, fit and assembly ) were fine. Once the electrician was done I did a few test cuts with your blade. The results were OK. I got a Forrest 10" 40T Woodworker II blade and the results were fantastic ! This saw ( I believe ) will be a source of enjoyable wood working for many years.
I bought this saw in October. There was a dent in the fence, and Grizzly sent a new one right away. I wired the garage for 220v and absolutely love this saw. The alignment was true out of the box. Instructions were well laid out and easy to follow. I am glad I chose this model, for a home DIY guy it is just the ticket for building cabinet drawers, barn doors and other items on my remodel list. I am very happy with the value for the money I spent.
Have not had a chance to use very much for having to correct issues. Dented motor fan cover, breaker on switch did not work, missing mounting screws for on off switch and now a vibration I cannot find. Wandering if I have a lemon. Will give updated review later.
Love everything about it except the blade guard. I canâ€™t see anything once the wood goes under it. In theory it makes sense especially the extra vacuum capability for dust control but it only lasted a day.
Other issue is I have 120v electrical outlets and the sales person told me the saw came with a conversion kit. It didnâ€™t. Cost me another $30 and a one week wait to use my new saw.
I do recommend it but buy the conversion kit at the same time Save yourself time and money
I've only had a few weeks of use on this bad boy, but I'm loving everything so far. It's nice and quiet, and has no problem cutting through anything I've sent at it.
A word of advice though: If you have a small shop, spring for the Grizzly Bear Crawl mobile base. The foot-operated lever is a godsend.
Purchased this as an early Christmas present to my shop. Very happy with selection of the G0833P. Everything out of the box was perfect, and Owners manual was very well written. My original table saw that this one is replacing, I bought new from Sears 30 years ago. I still remember how tricky the setup was. This one was a breeze! Excellent price, excellent saw! Con: So new that they don't offer a zero clearance insert for it as of yet.
Bought this saw prior to Christmas, fast delivery by UPS.
My saw has been sitting in my garage since being delivered!
My saw will probably still be sitting there for another 2 weeks!
Neither UPS, nor Grizzly can seem to find the box containing the rails to my saw!
I guess I can name my saw "KETCHUP!"
Love this saw. I was ready for delivery with a dolly and piano cart but didnt need it... The delivery guy wheeled it to my garage for me... thank you delivery guy...
After getting the saw to my basement shop and setting and tweeking everything I couldnt be happier. Plenty of power and the fence is dead on... perfect addition to my shop..
I wish the power cord was a couple feet longer but everyones shop is setup differantly. Plus, I can fix that... for the money I feel I got a great buy comparred to the pricey saws that do the same thing.... thanks Grizzly for supplying woodworkers with good products at a reasonable price....
Very powerful in combination with a Forrest 40 tooth Woodworker II blade. Easy to setup, easy to adjust, excellent dust collection
This is my first cabinet saw, and so far I am really pleased. The only reason I didn't give it 5 stars, is that the box the fence is in, doesn't have enough cushion or packing, and mine ended up with a little ding at one end. A couple of quick passes with a file took care of it, but it shouldn't have been able to break through the box so easy. If it had been any worse, I would have rejected the box. Other than that I am enjoying the heck out of it.
I have owned several table saws and downsized from a cabinet saw to this saw. It is easier to set up, adjust and use than any of my previous saws. Love the dust collection and easy on/off blade guard and riving knife.
I really like the saw. It is quiet with plenty of power. When it arrived, one of the fence rails was rusty. The exhaust system from the guard to the dust port as shown in the photo was not included with the saw.
I bought this 1month ago and love it. however I have 2 issues with it. after 2 calls you got me the right screws to finish putting it together. I just used sliding guide that push's wood through saw and its 1 degree off center. to use it I had to pull the pin out and lock the handle to make it square. I was in a hurry to cut my board so I didn't try to fix it or if I could. when I get back from Christmas brake I will call you if I can't get it adjusted right. spending 1000.00 dollars you would think you would have a accurate guide.
My only disappointment is the dust collection system. While the specs say it comes with a 4" chute, in reality it's only a 3.75" chute. I don't know of any 3.75" connecting ducts. When I called the technical support line they were aware of the issue and are "working on a solution". I was told to fill in the difference with tape or Styrofoam! Since this saw is not on a dedicated line in my shop this is somewhat of a pain to hook up the system every time I go to use the saw. The paint job on the lower cabinet could have been better... but some wax should have sealed the surface.
Very happy with the saw, 1 issue front rail tube 3 out of 5 bolts stripped, waiting for a new rail. Saw is everything that I expected I was able to zero the saw within .003. The saw was easy to assemble and I purchased a high end blade so I can not review the saw blade that came with the table saw. Dust collection at the base works very well, have not used the blade guard yet, over all the dust is at a minimum.
I bought this table saw about one month ago. There was some hesitation based on it being a new model. I had originally considered buying a rigid or delta saw from one of the big box stores, but those saws are no comparison to this grizzly. This is the best value of saw for the money and I expect it will last for a very long time. The saw was easy to assemble with great instructions. Very few adjustments were needed to get it dialed in. This is my first grizzly machine and based on this experience, it won't be my last.
Motor has plenty of power
Blade tilt and lift operate smoothly and consistently
Saw is quiet with almost no vibration
Great fence design (high accuracy and repeatability)
Build quality is excellent and saw is very heavy and stable.
Blade dust collection is not very effective
Included blade is of lower quality
There is no place to store accessories on the saw (push sticks, miter gauge, wrenches, etc)
Saw arrived with a little damage but not worth sending back. Customer service was great they sent out parts as soon as they could. Dented access cover, fence all replaced. My only complaint is I was missing most of the hardware to put it together. All of this heavy duty packaging and the nuts and bolts were in a flimsy bag that had split on the bottom. Yes customer service sent out more most were correct but I needed to go to the hardware store for a few items still. But got it all together it seems to be fine. (Would have been nice to see a grizzly hat show up with the parts just for my troubles.) I think itâ€™s a great saw and would recommend it to everyone.
This saw has lived up to all my expatiation, very easy to assemble. This saw runs very smooth and quiet.
If I had known at time of order what I have learned since the saw arrived--I would not have purchased this saw, I would have purchased a different saw from Grizzly. The reason I would have not chosen this saw is because it is essentially impossible to equip the saw with a zero clearance insert, which is important to me. I believe that not including this limitation in the descriptive literature is deceptive. I did not have any success in making a deal to return the saw when talking to Cust. Svc.--it was box up and return ship at my expense and a restocking charge. This all added up to making an alternative purchase too expensive.
In all other respects, the saw is great and as described. Set up took a bit of time, goes better with a helper, supplied manual is just excellent in supporting set up and operation. If a buyer had strict and limited uses for the saw which did not require zero clearance insert, I would happily recommend the saw. The limitation should have been disclosed in saw Specifications>
This is my first table saw, Iâ€™ve been woodworking DIY, and a few pro projects for years. Iâ€™ve got a couple weeks on the saw sounf small furniture projects, so far and the thing does all that I could ask and more. Very precise alignments, Good fence, powerful cutting, ripping, dado, lap joints, itâ€™s just awesome!
I was very happy with the quality of this table saw when it arrived. Very easy to set up and get it running. Included all the tools you needed to put it together. UPS freight destroyed the first saw that Grizzly sent me. I called customer service and told them that it was damaged. They had a new saw sent to me within 48 hours. I can't say nothing but great things about Grizzly. I have used the saw a few times since I got it and it has run perfect for me. I'm looking forward to years of run time on this!!
I ordered this saw after MONTHS of reading reviews for other table saws. I researched Jet, SawStop, Shop Fox and Delta, but I kept coming back to Grizzly. The reviews for this saw were excellent, so I decided to pull the trigger and place my order, and Iâ€™m glad I did. My saw arrived about 5 days after I placed my order and it came UPS via semi truck. My only issue is when I placed my order I thought it would have been unloaded off the truck. The truck arrived with no ramp or lift gate. The driver told me that for an additional $120 I could have gotten the lift gate. I was fortunate that the driver was helpful and patient. I had a stack of 2x8â€™s and a sheet of plywood and I made a makeshift ramp. We got the saw unloaded with no problems.
I was super impressed with the weight of the saw. I unpacked the saw and assembled on my own with no problems. All parts were there and labeled. The manual was laid out very nicely and instructions were very easy to follow. I was thrilled to see that all the screws, washers and nuts were in separate bags for each part of the saw. Once I got the saw together the extension wings just needed a little masking tape to make the table perfectly level. Cleaning the parts of the packing oil was easy using WD40. I have to say that fine tuning the saw was super easy because most of the adjustments required little work on my end. The bevel on the wings didnâ€™t match the main table but that shouldnâ€™t matter. The quality of all parts and construction made me glad I made this purchase.
I purchased this saw to replace my Ridgid contractor saw and WOW what a difference. I installed a Diablo blade and along with the 240 volt outlet needed, this saw cuts through wood like butter. What most impressed was the quality of the cut, it was smooth as glass. Iâ€™m new to woodworking but with this saw Iâ€™m super excited to start my new endeavor. I would highly recommend this saw to anyone.
This is my first table saw. I was impressed by how close all the settings were. I went through and checked all the settings with a caliper. There were very few things that I needed to adjust. The manual is very good at explaining things and has good pictures to back it up. I even thought the blade that was included is good.
I bought this saw as an upgrade to a contractor's saw that I have had for the past 10 or so years. My wife bought me this one for my birthday and I have to say that between Grizzly support and the quality of the saw - I am more than happy.
First, I found the setup easy. Just remember to put the front fence rails down all the way or the adjustments on top of the fence will be above the table level. I made the mistake of having them too high at first.
Second, just take your time in making adjustments. It required a 240 Volt circuit be added to the garage, but that was no big deal.
I have it all set up and the adjustments stay in place nicely! The fence is solid and it is such a joy to use - definitely an upgrade from what I had!
I look forward to many years of service from this saw.
We went to Grizzly in Bellingham, WA looking to purchase G0771Z after verifying they had it in stock. They did not - in fact, we were told it wouldn't be until January until we could possibly get one.
During the discussion with the employees I noticed an couple issues with the saw -
The first was that when the fence was set to a certain distance, there is an adjustment bolt at the back of the fence that runs into the miter gauge - so if you plan to use the right side miter gauge slot, tools could run into this adjustment bolt. The salesmen indicated that an adjustment of the fence would need to be done for the showroom floor model, but upon assembly, there's some adjustment, but not that much. I also identified another issue related to the fence system - which I will explain later.
The salesman also indicated the "upgrade" door allowing access, to make changes to the blade easier - I remember this specifically as I joked about the contorted fingers trying to get a dado set in my previous saw. The salesman failed to realize the access door to the cabinet is on the opposite end of the saw arbor/bolt - meaning the door is for another use not related to blade changes.
I asked if there was a difference between the top of this saw and the G0771Z - and they claimed no, they all have the same cast iron top. I indicated that I remember reading the G0771Z doesn't have the "precision machined" top that this saw showed on the flyer - and they argued with me. Based on the description of the G0771Z and this/other saws, this has a better top.
The last point can be a Segway - the top is attached to the base upon shipment. The wings are kept separate. They are all oiled to the hills with cutting oil, and the underside of the wings, while painted, also had loose shavings still attached. Once assembled, a vigorous cleaning of the top was required to rid the cutting oil (understood this was meant to reduce possible rusting of the top, but it seemed excessive, as the wing boxes themselves were bleeding the oil on the outside of the cardboard). Upon waxing the entire top - you can see the variance of the type of cut in the top from the center section to the wings.
The assembly of the saw was pretty straight forward, with the exception of some incorrect verbiage regarding the back fence bolts (they are not all the same metric thread size).
The saw is quiet (in comparison to a couple older contractor style saws I had previously) and seems powerful. I ripped through some maple and purple heart (4/4 and 5/4) without issue in regards to the saw. The base is sturdy and the top (so far) is flat.
Now the problems - the fence system.
As indicated above, there is the problem in regards to the adjustment bolt on the fence able to obstruct the miter gauge/slot. This gets worse - the instructions don't indicate where to place the fence other than direction and to be even with the top. However, if the fence rails are placed too high - that same pesky fence adjustment bolt will actually sit HIGHER than the table itself - which causes the wood you are trying to push through to not sit flat. I will now have to completely re-adjust the front fence to fix this. If you buy this saw - take note.
The fence adjustments - there seems to be "feet" under the adjustment bolts - the front "foot" (as it's called in the instructions) leaves marks on the back fence. This led me to realize that the adjustment bolts/feet have a soft plastic that glides across the fence. I forsee these to be a wear item, and am not overly satisfied with that.
There aren't any "micro" adjustment knobs on the fence.... It's basically, bump it to where you want it, bump it back, bump it the other way.... tap, ok maybe there. The 2 previous saws I had utilized fence/rail systems that had a micro adjustment knob (one built in the 1950's and the other the 1980's) and am surprised that a saw of this caliber doesn't have that.
The fence system is sold as an upgrade over the G0771Z - in part because it has an aluminum rail that can be flipped, for close quarter/shorter wood to be cut. This is the 2nd problem I pointed out to the salesman, and upon both assembly and use of our saw - it got me without even thinking.
The aluminum fence can be rotated 90* to allow for more precise cuts or shorter wood cuts. However, when the aluminum fence is rotated 90* for the short wood cuts, the distance from the edge of the fence to the blade now changes. This means when you assemble the tool, with the fence in the "tall" position, and apply the measuring stick for the fence system and then use the fence in the 90* position, your measurements have to be manually done (can't use the on-rail measuring stick). My point is that there should have been room for 2 measuring adhesives and/or one measuring adhesive that represents both directions of the fence - if you're going to engineer the fence to do that, then the measuring tools for the fence should be engineered to be utilized both directions.
All in all the saw is great, the fence is sturdy, but needs to be thought out better.
The photos I've attached show:
Variance of how the top is cut (wing vs top)
The fence obstruction to the miter gauge (this is also the adjustment bolt that sits higher than the top in it's current build)
The 2 photos of the fence - the fence hasn't been moved between the 2 photos, rather the aluminum portion simply turned 90 degrees - in one photo the miter slot is fully shown, in the other, it's fully covered (but notice, the measurement shown never changes).
The saw came quickly and was easy to unpack and set up. Required a little adjustment but for the most part was ready to go. Supply this saw with 240v and it's a beast. Effortless, accurate cuts. Recommend highly. Great value!
This is my first "real" table saw and I am impressed with how heavy and sturdy it is. The packaging was good. The cardboard box is sturdy and disassembled without cutting cardboard. The inner packages were marked with the contents. I did not see any damage to the parts. I assembled it easily by myself. I only had a few challenges. I installed the front angle parallel to the table top. I let it sit low in the adjustment slots because it was easy. The fence was too low and dragged on the table even with the adjusters. I raised the front rail in the slots and it is good. I aligned the rear angle parallel to the table top. As I tightened the final screw, the rail deflected 0.030" at the end. When I loosened the screw, it returned to being straight. The table extension is slightly longer than the main table (I made the tables flush at the front). Tightening the screw into the main table caused the angle to bow. I will add a shim to fix it. The rear chamfered edge of the main table does not match the extension tables. I don't think it will affect the function. The saw runs smoothly. Dust collection seems to be very good. I recommend putting the saw on wheels. It is very heavy. The weight is a good thing unless you are moving the saw.
I bought the saw based on Grizzly's reputation since reviews of this new saw aren't really out yet.
The top of the fence, which will be the face of the fence in low profile orientation, was damaged a little bit during shipping. Its not a huge dent, but if I was running something along it and had pressure on the front it would move the workpiece. Grizzly was very nice on the phone and sent out a replacement part.
Aside from that, the saw is very solid. All the pieces are heavy, blade guard on top moves smoothly, fence glides well.
I wound up taking the top off to make it lighter when wheeling it around my to my basement door. Even without a top, it was heavy (in a good way). Nothing on it feels cheap. The trunnion are attached to the cabinet so the top can be adjusted if needed.
Assembly is easy and straight forward. Dust collection is great so far. The blade guard dust hose does a good job of getting most of the dust kicked up from the blade. The guard moved smoothly, and the riving knife is easy to swap in.
Being able to change the fence from tall (standard) position to a low profile position makes cutting thin material close to the blade much easier. Everything can be adjusted to get it dialed in for perfect cuts. It really feels like a saw that will last a very long time.
There are a couple pre-drilled holes on the right end of the fence that could be used to attach a wood wing or maybe a router table, which is a nice touch.
I bought the Bear Crawl mobile base to go along with it. I have a small shop in my basement and the base makes moving is around very easy. Inside the bottom of the cabinet there are four bolt holes (2 of which are used to secure it to a shipping pallet) which I used to level the saw on the base with some bolts.
I made a short review of the saw on YouTube which gives a quick overview of it if you want to see some user video of it. Search for Chimp Woodshop G0833P on YouTube
I am very happy with my purchase and looking forward to years of great use.
I just received the G0833P saw that I ordered a few days ago. It arrived as scheduled, with no damage to the shipping containers. Although it has considerableweight, I was able to get it into my shop without much difficulty.
After carefully unpacking everything and a quick reading in the manual, I assembled and cleaned the machine. The instructions recommend a second person to help with the heavy work, but I completed the work alone without much difficulty. All the parts and pieces and hardware was there, we'll packaged and labeled. Assembly went smooth with no issues at all.
After assembling, I did a preliminary check for all the crucial alignment points. I was very impressed at how accurate everything was! I plan to wait a few days to let the machine settle before I make any adjustments, but at this point I doubt much adjustment is needed. I am very impressed with the quality, fit, and finish of this machine. I made a few trial cuts and got great results. Straight cuts, smooth finishes, and very quiet operation. Tried the "nickel" test, there is just no vibration! Cut through some 6/4 oak, no problem at all.
I would highly recommend this table saw to anyone who appreciates quality machinery. It is very impressive. Being a new model, there were no reviews to read before I ordered it. But I trust Grizzly as a brand, and have purchased several pieces of equipment from them in the past, with no quality issues. Great products!
The only issue I did find with this saw was that there was no provisions for leveling the machine. No base levelers were included. Maybe the reason is that most woodworkers mount equipment on Mobil bases. But that is not a big issue. I used rubber non-skid pads under the corners and a few shims to get it perfectly level and very stable.
This is an exceptionally well built saw. I would give it 6 stars if that was possible!