Grizzly   |  Model: G0750G
12" x 36" Gunsmithing Lathe
Price: $3,775.00
Recently Added ×
You May Also Like

Grizzly G0750G - 12" x 36" Gunsmithing Lathe

click to zoom

tap to zoom


    See this item in our 2017 Main Catalog!
    Buy Now!
    Freight:  Freight
    Oversize:  Oversize
    Monthly payments as low as . Learn More

    This deluxe 12" x 36" Gunsmithing Lathe features a totally enclosed gearbox for quieter operation, smoother performance, reduced oil change frequency, and longer gear and bearing life. Professional gunsmiths will also love the outboard spindle "spider" support and specially designed tailstock with 1/2" square-drive lock-down that can be used with a torque wrench for precise alignment of centers. Additionally, this lathe is jam packed with high-end features and all the essential accessories you need to get started—just take a look at the lists below and see for yourself. This is one amazing deal!


    • High-quality NSK spindle bearings
    • Removable bed gap
    • Spindle switch on carriage
    • LED worklight
    • Steady and follow rests with roller bearing supports
    • Outboard spindle support spider
    • Cast iron stand with extended base
    • Cast aluminum end-gear cover
    • 1/2" tailstock square-drive lock-down to use torque wrench for precise positioning


    • Swing over bed: 12"
    • Swing over gap: 17"
    • Swing over cross slide: 7"
    • Distance between centers: 36"
    • Bed width: 7-1/4"
    • Spindle bore: 1.57" (40mm)
    • Spindle nose taper: MT #5
    • Spindle nose: D1-5
    • Spindle length: 17"
    • Spindle length with 4-jaw chuck: 21-1/4"
    • Cross slide travel: 5-5/16"
    • Compound travel: 3-1/4"
    • Tailstock barrel taper: MT #3
    • Tailstock barrel travel: 3-3/4"
    • Motor: 2 HP, 220V, single-phase, 8.5 Amps, 60 Hz, 1725 RPM
    • Number of speeds: 9
    • Range of speeds: 70-1400 RPM
    • Height with stand: 56"
    • Length with stand: 66"
    • Width of stand: 29-1/2"
    • Weight: 1059 lbs.
    • Approximate shipping weight: 1236 lbs.

    Standard Equipment:

    • 6" 3-Jaw chuck with 2 sets of jaws
    • 8" 4-Jaw chuck with reversible jaws
    • 10" faceplate
    • Steady and follow rests with roller bearing supports
    • MT #3 live center
    • Two MT #3 dead centers (1 carbide-tipped)
    • Quick change tool post with one tool holder
    • Set of 6 change gears
    • Toolbox
    Show More...

    Accessories and Related Items: View All

    You May Also Like:

    Customers who purchased this item also purchased:

    1 Customer Review (4 out of 5 stars): Sign in to write a review

    4/ 5stars

    Only a few issues with the crate, obviously it was handled a bit rough as it was broken inside. Only damage seemed to be the tailstock pin being bent a little but it has no effect on the operation of the lathe. I ordered oil for the headstock to replace it as outlined in the manual after break-in however it was empty so I had to spend another $65 for another gallon of oil and wait for it to arrive before pressing the lathe into service. I called tech support about the issue and they did not offer to compensate for the extra gallon. Other than that the lathe seems to be of good design and should last a long time.

    Animation for G0750G