Grizzly   |  Model: H4811
131-1/2" x 1" x .035" x 2 TPI Hook Bandsaw Blade
Price: $26.95
Recently Added ×
You May Also Like
(21)

Grizzly H4811 - 131-1/2" x 1" x .035" x 2 TPI Hook Bandsaw Blade

click to zoom

tap to zoom

See this item in our 2018 Main Catalog!
98 114 727
Buy Now!
Price:
Freight:  Freight
Tariff Fee:  Tariff Fee
Oversize:  Oversize
Total:
Monthly payments as low as . Learn More
Specifications:
  • Length: 131-1/2"
  • Width: 1"
  • Type: Carbon Tool Steel
  • TPI: 2 Hook
  • Gauge: 0.035"

We have many combinations of blade widths and pitch from the smooth cutting raker tooth to the efficient skip tooth and the aggressive hook tooth styles. Top quality saw steel manufactured to precise tolerances and guaranteed welds result in very smooth cutting blades. Blades are sized to fit Grizzly bandsaws as well as many other brands. Just match up the length in the charts with the recommended length for your bandsaw. If you need more information to help match blade cutting characteristics with your particular applications, just call our friendly service technicians.

Blade Selection: Selecting the right blade for the cutting task requires knowledge about blade characteristics and cutting priorities (i.e. speed, finish, etc.).

  • Blade Length: Measured by the blade circumference, blade lengths are specific to each bandsaw. They are determined by the wheel diameter and distance between the wheels.
  • Blade Width: Measured from the back of the blade to the tip of the blade tooth (the widest point). Blade width determines the largest and smallest curve that can be cut, and contributes to the accuracy of cutting straight—generally the wider the blade, the straighter it will cut.

Tooth Set: Two common tooth sets for wood bandsaw blades are alternate and raker. Each type of tooth set removes material in a different manner, leaving cuts with different characteristics.

  • Alternate: An all-purpose arrangement where the teeth are bent evenly left and right of the blade.
  • Raker: Three teeth in a recurring group—one bent left, one bent right, and one that is not bent. The raker set is ideal for most contour cuts.

Tooth Type: The most common tooth types for wood blades are:

  • Standard (or Raker): Equally spaced teeth set at a “0” rake angle. Recommended for thinner workpieces and general use.
  • Hook (or Claw): Wide gullets (round or flat), equally spaced teeth, positive rake angle, and fast cut with good surface finish.
  • Skip (or Skip Tooth): Wide, flat gullets, a "0" rake angle, equally spaced teeth, and recommended for thick wood cutting.
Show More...

Accessories and Related Items: View All

You May Also Like:

Customers who purchased this item also purchased:

21 Customer Reviews (4.8 out of 5 stars): Sign in to write a review

Ray H
Great re-saw blade 2/11/2018

Excellent blade. Re-saws eastern red cedar easily.

1/17/2018

Excellent product exactly as advertised. Received on time

Big sharp blade looks like a workhorse. 12/30/2017

Such a massive blade pulls the machine out of co-planarity requiring adjustment of lower wheel tilt to get the wheels parallel, and shimming of a wheel to get them coplanar. Which will need to be reversed if putting on a smaller blade, I suspect - what a hassle.

12/8/2017

This blade is great! I bought it a few months back to resaw some rough cut walnut, and it worked like a charm. So far I've put over 1000bf through and still wicked sharp. For the price I would highly recommend it!

8/11/2017

I go the right for the job, this blade cut my time cutting from about 10 minutes to around one minute.

GERALD K
Great customer service 6/2/2017

We like the product, very sharp and cuts well, but we do have an issue with them breaking at the welds. Your company has been great about replacing any that are under warranty at no cost to us, which we greatly appreciate. We will remain Grizzly customers, because we are so happy with your dedication to customer service!

robert L
good product, cant complain 6/1/2017

Never had a problem with Grizzly products. Ordered 1 in blades by accident but like them better than 3/4. Thanks

Michael K
Excellent blade 5/18/2017

I have a G0513ANV bandsaw. It has a very aggressive cut. I use this blade in it for making short logs into lumber and get just about the same cutting speed as I do from my 30" Oscar 13 HP gas powered sawmill.

Works well 1/26/2017

I bought this blade for resawing and it does just that. I hit a few nails on the first blade before it got dull, but it still cut just fine it's a good solid blade for the price.

Ask A Question
Animation for H4811
×