14 X 40 Gunsmith's Gearhead Lathe
Another great addition to our line of spectacular Grizzly lathes is this 14" x 40" workhorse. Supplied with an 8-speed gearhead, it also comes with a 2 HP motor, D1-5 spindle with a generous 1-9/16" bore, a 200 series quick change tool post with 2 holders, flood coolant system, halogen work light, pull-out chip tray and foot break - great for safety! Plus, the tailstock has a socket for a torque wrench mounted on the front side and the outboard end of the spindle has a spider mount system - great for stabilizing long shafting and rifle barrels. This is a well stocked machine! Check out the standard equipment list below.
Removable gap bed allows turnings up to 19-3/4" in diameter Easy to use lever controls Hardened and ground cast iron bed Cuts 4-112 Standard TPI and 0.1-7 Metric On/off reverse switch on carriage Halogen work light Outboard spindle has 4 brass tipped screws for supporting barrels Socket for tailstock lock Cast aluminum gear cover D1-5 spindle nose (6 pin) 1.57" spindle bore Foot brake Swing over bed: 14" Swing over gap: 19-3/4" Swing over cross slide: 8-13/16" Distance between centers: 40" Bed width: 7-3/8" Spindle bore: 1.57" Spindle nose taper: MT#5 Spindle nose: D1-5 Camlock Cross slide travel: 6-11/16" Compound travel: 3-9/16" Tailstock barrel taper: MT#3 Tailstock barrel travel: 3-15/16" Motor: 2 HP, 220V, single-phase, 10 Amps, 60 Hz, 1725 RPM Number of speeds: 8 Range of speeds: 70-2000 RPM Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H Approximate shipping weight: 1550 lbs. 6" 3-Jaw chuck with reversible jaws 8" 4-Jaw chuck with reversible jaws 11" face plate Steady rest/follow rest Full length splash guard Quick change tool post with 2 tool holders 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve Pull out chip pan 1/2" drill chuck w/ MT#3 arbor Toolbox