Grizzly   |  Model: G0709
14 X 40 Gunsmithing Gearhead Lathe
Price: $5,125.00
Recently Added ×
You May Also Like

Grizzly G0709 - 14 X 40 Gunsmithing Gearhead Lathe

click to zoom

tap to zoom


    See this item in our 2018 Main Catalog!
    Buy Now!
    Freight:  Freight
    Oversize:  Oversize
    Monthly payments as low as . Learn More
    Another great addition to our line of spectacular Grizzly lathes is this 14" x 40" workhorse. Supplied with an 8-speed gearhead, it also comes with a 2 HP motor, D1-5 spindle with a generous 1-9/16" bore, a 200 series quick change tool post with 2 holders, flood coolant system, halogen work light, pull-out chip tray and foot break - great for safety! Plus, the tailstock has a socket for a torque wrench mounted on the front side and the outboard end of the spindle has a spider mount system - great for stabilizing long shafting and rifle barrels. This is a well stocked machine! Check out the standard equipment list below.


  • Removable gap bed allows turnings up to 19-3/4" in diameter
  • Easy to use lever controls
  • Hardened and ground cast iron bed
  • Cuts 4-112 Standard TPI and 0.1-7 Metric
  • On/off reverse switch on carriage
  • Halogen work light
  • Outboard spindle has 4 brass tipped screws for supporting barrels
  • Socket for tailstock lock
  • Cast aluminum gear cover
  • D1-5 spindle nose (6 pin)
  • Foot brake


  • Swing over bed: 14"
  • Swing over gap: 19-3/4"
  • Swing over cross slide: 8-13/16"
  • Distance between centers: 40"
  • Bed width: 7-3/8"
  • Spindle bore: 1.57" (40mm)
  • Spindle nose taper: MT#5
  • Spindle nose: D1-5 Camlock
  • Cross slide travel: 6-11/16"
  • Compound travel: 3-9/16"
  • Tailstock barrel taper: MT#3
  • Tailstock barrel travel: 3-15/16"
  • Motor: 2 HP, 220V, single-phase, 10 Amps, 60 Hz, 1725 RPM
  • Number of speeds: 8
  • Range of speeds: 70-2000 RPM
  • Overall dimensions: 71-1/2" L x 26-3/16" W x 52" H
  • Approximate shipping weight: 1550 lbs.


  • 6" 3-Jaw chuck with reversible jaws
  • 8" 4-Jaw chuck with independent jaws
  • 11" face plate
  • Steady rest/follow rest
  • Full length splash guard
  • Quick change tool post with 2 tool holders
  • 2 MT#3 dead centers (1 carbide tipped)
  • 1 MT#3 live center
  • 1 MT#5 - MT#3 sleeve
  • Pull out chip pan
  • 1/2" drill chuck w/ MT#3 arbor
  • Toolbox
  • Show More... California Proposition 65 Warning

    Accessories and Related Items: View All

    You May Also Like:

    Customers who purchased this item also purchased:

    5 Customer Reviews (4.8 out of 5 stars): Sign in to write a review

    Scott W
    Good product 1/13/2018

    Only issue I have is a gearbox that leaks. Other than that. I love it


    I like the product and the excellent service Grizzly has provided.

    Barry Y
    One very fine quality lathe 8/19/2017

    After owning this lathe for a couple of years I feel I now know enough about it to write a good review for you. I have used Monarch's, Hardinge, Mori Seiki, American and many other lathes in my work as a Machinist. I can unequivocally recommend this lathe to anyone compared to any other lathe at any price. It is slightly lighter duty than the other lathes mentioned, but it is not lower in precision. The lathe works as it is supposed to. Oh, and did I mention that I did not have to repair it? If you want to repair and hand scrape machine tools instead of use them, pay the same price as this lathe and buy a worn out old machine that you can work hard on for a year or two. If you want to use the machine instead, buy this one. The things that are not quite as high quality as a lathe costing eight times as much are not of major consequence. This lathe is straight and stays straight if you level it regularly. I can think of no reason anybody would be unhappy with this machine at all. A fabulous machine for very little money. What more could you possibly ask?

    terry N

    So far so good, we did receive the lathe with no oil in the headstock

    Animation for G0709