South Bend 14" x 40" 16 Speed Lathe 220V
click to zoom
This South Bend lathe is supplied with an adjustable feed rod clutch & stop collar on the feed rod. This is a great safety feature when working close to the chuck. Set the stop collar so the saddle & tool post are positioned at a safe distance from the chuck & tighten the lock screw. Adjust the feed rod clutch to a low setting. If the carriage comes into contact with the collar, the clutch slips, saving your machine from a serious crash.
Swing over bed: 14.17" Distance between centers: 40" Swing over cross slide: 8.66" Swing over gap: 20.94" Width of bed: 9" Spindle nose to gap: 6.46" Cross slide travel: 7" Compound slide travel: 4" Spindle nose: D1-5 camlock Spindle bore: 1.57" Spindle taper: MT #5 Spindle speeds: (16) from 50 - 2570 RPM Tailstock taper: MT #3 Tailstock travel: 4.5" Tailstock barrel diameter: 1.968" Inch thread range: 2 to 72 tpi (45 pitches) Metric thread range: 0.2 to 14 mm (39 pitches) Modular threads: 0.3 to 3.5 (18 pitches) Diametral threads: 8 to 44 (21 pitches) Longitudinal feed range: 0.002 to 0.067 IPR Cross feed range: 0.001 to 0.034 IPR Number of feed selections: 45 Coolant motor size: 1/8 HP Spindle motor size: 5 HP/2.5 HP Voltage: 220V, 3-phase, 60 cycle Machine footprint: 80-3/4" x 19-1/2" Approximate shipping weight: 2684 lbs Allen Bradley electrical components Meehanite casting, signature South Bend 3 V-bed 8" 3 jaw scroll chuck w/ D1-5 plate 10" 4 jaw ind. chuck D1-5 12" faceplate D1-5 Safety chuck guard with microswitch shut-off Steady rest with roller tips Follow rest 4-way tool post Halogen lamp Complete coolant system Micrometer carriage stop Spindle sleeve MT#5/MT#3 Two MT#3 Dead centers Threading dial indicator Leveling pads - 6 pcs. NTN Japanese spindle bearings Full length splash guard Front removable sliding chip tray Tool set & box Operation manual & parts list SB1264 Collet Attachment SB1263 Taper Attachment
Animation for SB1039