Grizzly G0554Z - 14" x 40" Gear-Head Floor Lathe

This fully equipped, Heavy-Duty Floor Lathe will handle just about anything you can throw at it. Features like extra wide 10" bedway, coolant system with splash guard, foot brake and interlocked feed rod and leadscrew, not to mention all the standard accessories that come with this machine, will turn your shop into a real profit center. Check out all the features and specifications and then look at the price again and you’ll agree, this is one machine that’s tough to beat!

SPECIFICATIONS:

• Swing over bed: 14"
• Swing over gap: 20"
• Swing over saddle: 8-1/2"
• Distance between centers: 40"
• Spindle bore: 1-1/2"
• Spindle nose: D1-4 Camlock
• Bed width: 10"
• Spindle nose taper: MT#5
• Cross slide travel: 6-3/4"
• Compound travel: 3-1/2"
• Tailstock barrel taper: MT#3
• Tailstock barrel travel: 4-3/4"
• Motor: 3 HP, 220V, single-phase, 60 Hz, 1725 RPM
• Range of speeds: (12 speeds) 40-1800 RPM
• Number of longitudinal and cross feeds: 40
• Range of longitudinal feeds (in./rev.) 0.0012"-0.0294"
• Range of cross feeds (in./rev.) 0.0004"-0.0103"
• Number of inch threads: 40
• Range of inch threads: 4-112 TPI
• Number of metric threads: 23
• Range of metric threads: 0.45-7.5mm
• Leadscrew: 8 TPI
• Overall dimensions: 46"H x 75"L x 28"W
• Approximate shipping weight: 2578 lbs.

FEATURES:

• One piece cast iron stand
• Foot brake
• Hardened and ground gears in headstock
• Induction hardened bedways
• Jog button and emergency stop
• 6" 3-jaw chuck with two piece jaws
• 8" 4-jaw chuck
• 12" face plate
• Steady rest / follow rest
• 4-way turret tool post
• MT #3 dead center
• Coolant system with back splash
• Micrometer carriage stop
• Inch/metric handwheel dials
• Threading dial
• Mounted light