Grizzly   |  Model: G0824
14" x 40" Gunsmith Lathe with 2" Spindle Bore
Price: $5,395.00
Recently Added ×
You May Also Like

Grizzly G0824 - 14" x 40" Gunsmith Lathe with 2" Spindle Bore

Model: G0824
Buy Now!
Freight:  Freight
Oversize:  Oversize
Monthly payments as low as . Learn More
This 14" x 40" Big Bore Gunsmithing Lathe has a huge 2" spindle bore - the largest of any of our 14" x 40" lathes - perfect for gunsmithing larger diameter barrels. It also includes one of the finest X/Z-axis DROs on the market today. It's jam-packed with other great features: an 8-speed gearhead for spindle speeds from 70–2000 RPM, a D1-5 camlock spindle, 200-series quick-change tool post, flood coolant system, LED worklight, pull-out chip tray, ball-bearing steady and follow rests, cast iron stand, and safety foot brake! To top it off, the outboard end of the spindle has a "spider" mount system - great for stabilizing long shafts and rifle barrels.


  • Swing over bed: 14"
  • Swing over gap: 19-3/4"
  • Swing over cross slide: 8-13/16"
  • Distance between centers: 40"
  • Spindle nose: D1-5 camlock
  • Spindle nose taper: MT#6
  • Spindle bore: 2.01" (51mm)
  • Spindle length: 17-1/4"
  • Spindle length with 4-jaw chuck: 21-1/2"
  • Tailstock barrel taper: MT#3
  • Tailstock barrel travel: 3-15/16"
  • Cross slide travel: 6-11/16"
  • Compound travel: 3-7/8"
  • Motor: 2.5 HP at 1720 RPM; 220V, 10A
  • Spindle speeds: 8, 70–2000 RPM
  • Range of threads (inches): 34 @ 4–56 TPI
  • Range of threads (metric): 26 @ 0.4–7mm
  • Width of bed: 7-3/8"
  • Approximate shipping weight: 1550 lb.
  • X- & Z-axis DRO
  • Removable bed gap
  • Quick-change spindle speed and gearbox controls
  • On/Off reverse spindle switch on carriage
  • Adjustable halogen work light
  • Steady and follow rests with roller bearing supports
  • Outboard spindle support spider with 4 brass-tipped bolts
  • Foot brake with motor shut-off switch
  • Built-in coolant system
  • D1-5 camlock spindle nose
  • 7" 3-jaw chuck and 8" 4-jaw chuck
  • 200-series quick-change tool post
Show More...

Accessories and Related Items: View All

You May Also Like:

Customers who purchased this item also purchased:

5 Customer Reviews (5 out of 5 stars): Sign in to write a review

5/ 5stars

The Lathe is great, the 3 jaw chuck was a big disapointment .0035 TIR run out. I checked the spindle nose for runout and face squareness, great both less than .0002 TIR.
Grizzly sent another chuck, no better.

5/ 5stars

Hey there,
After many months of shopping for a larger lathe for my shop I settled on the G-0824. Quit honestly, as this is a New product for Grizzly's lathe lineup I was a bit apprehensive, as we all know, "NEVER" buy the first one of a new model. Well to my surprise, it arrived as promised, (07-21-2017), was well crated, all the accessories were there, and everything works. For the most part, the fit and finish is as good or better than other Chinese brands that I shopped. Have finished with the leveling and break-in procedure and have turned a small amount of mild steel and aluminum. The odd ball 7" chuck only has 0.0006" runout, the spindle and motor are quiet and efficient, only chatters when running too fast.
There are two items that fall short of my expectations, number one is that the headstock was not filled with oil. If you decide to purchase this lathe be sure to get an extra gallon of ISO 32 before the lathe arrives. The second issue is the tool post, it leaves a lot to be desired as I am used to an Aloris.

Great bang for your bucks.
5/ 5stars

I was researching lathes in this size for 6+ months before I purchased this one. For the price I was looking at used American, Italian, and Japanese lathes. None with a D.R.O. Some of them came with tooling that was rusting, missing parts, damaged ways, missing paint. This unit was new and came with more features than the other machines came with. The 3 jaw chuck that came with it was with in .00005 true when a straight rod was chucked into it. I ran a test cut with a 8" rod of 303 stainless steel between centers. After the cut the taper measured was .0003! This was after installing machinery feet and leveling the lathe of course. To be honest I own 3 lathes at this time, and this G0824 is my favorite. Now a word of caution, this lathe does not come with leveling feet. The table is made of steel not cast iron, so it is VERY top heavy so be careful when you move it or unpack it. I recommend that you use 1 day to unpack it and 1 day to run through the break in procedure and follow it to the letter. I would recommend this lathe to a friend, or any hobbyists that are on the fence. This lathe is nice. It's no monarch, or hardinge, but it is very nice for the price.

Animation for G0824