South Bend® quality is built into every one of these fantastic gearhead lathes! Features include electronic variable speed, universal QC gearbox, extra long saddle for stability, pull out chip pan, and of course, a full compliment of standard equipment that includes 3 & 4-jaw chucks, steady & follow rests, micrometer carriage stop and a lot more. Just check out the specs below and you'll agree, these lathes will be a handsome addition in any busy shop.
These South Bend EVS lathes are supplied with an adjustable feed rod clutch and stop collar on the feed rod. This is a great safety feature when working close to the chuck. Set the stop collar so the saddle and tool post are positioned at a safe distance from the chuck and tighten the lock screw. Adjust the feed rod clutch to a low setting. If the carriage comes into contact with the collar, the clutch slips, saving your machine from a serious crash.
Specifications:Swing over bed: 14.17"Distance between centers: 40"Swing over cross slide: 8.375"Swing over gap: 20.98"Cross slide travel: 9.25"Compound slide travel: 5.1"Width of bed: 10.24"Spindle nose: D1-6 camlockSpindle bore: 2.0625"Spindle taper: MT#6Spindle speeds: Variable from 20-2500 RPMTailstock taper: MT#4Tailstock travel: 6"Tailstock quill diameter: 2.047"Inch thread range: 2-72 TPI (45 changes)Metric thread range: 0.2-14 mm (39 changes)Modular threads: 0.3-3.5 (18 changes)Diametral threads: 8-44 (21 changes)Longitudinal feed range: 0.002-0.067 IPRCross feed range: 0.001-0.034 IPRNumber of feed selections: 45Coolant motor size: 1/8 HPSpindle motor size: 5 HPVoltage: 220V, 3-phase, 60 cycleMachine footprint: 19-1/2" x 82"Working envelope: 55" x 91"Approximate shipping weight: 3234 lbs.
Standard Equipment:Allen Bradley electrical componentsMeehanite casting, signature South Bend 3 V-bed8" 3 jaw scroll chuck w/ D1-6 plate10" 4 jaw ind. chuck D1-612" faceplateSafety chuck guard with microswitch shut-offSteady rest with roller tipsFollow rest4-way tool postHalogen lampComplete coolant systemMicrometer carriage stopSpindle sleeve MT#6/MT#4Two MT#4 Dead centersThreading dial indicatorLeveling pads - 8 pcs.NSK or NTN Japanese spindle bearingsFull length splash guardFront removable sliding chip trayTool set and boxOperation manual and parts listYaskawa G7A23P7 inverter
Optional Accessories:Taper attachment (unmounted)Collet attachment 5-C, quick change (unmounted) Model SB1268BackplateQuick change tool post system (see Tooling section)Precision 5-C collets - set of 8 (1/8" - 1", in 1/8" increments) Model SB1279Quick change tool post system (see Tooling section)5C colletsDrill chucks