South Bend 16" x 40" Lathe 440V

Special engineering with strict control over tolerances, materials and finish produced a machine that lives up to the South Bend®; name with spectacular results! The most seasoned machinist will appreciate the electronic variable speed control, 6" of quill travel in the tailstock, feed direction control on the apron, extra wide saddle for maximum rigidity and adjustable feed rod clutch with stop collar. A universal gear box eliminates gear changes for any pitch the machine can produce! Maintenance is also a snap with a one-shot lubricator on the apron, pressurized lube to the spindle and pull-out chip tray. Beautiful South Bend®; light gray and two-tone blue color scheme. Feature for feature, you won't find a lathe of this quality anywhere else!

Specifications:

Swing over bed: 16.14"

Distance between centers: 40"

Swing over cross slide: 10.375"

Swing over gap: 22.95"

Width of bed: 10.24"

Cross slide travel: 9.25"

Compound slide travel: 5.1"

Spindle nose: D1-6 camlock

Spindle bore: 2.0625"

Spindle taper: MT #6

Spindle speeds: Variable 20 - 2500 RPM

Tailstock taper: MT #4

Quill travel: 6"

Tailstock quill diameter: 2.047"

Inch thread range: 2 to 72 tpi (45 changes)

Metric thread range: 0.2 to 14 mm (39 changes)

Modular pitches: 0.3 to 3.5 MP (18 changes)

Diametral pitches: 8 to 44 DP (21 changes)

Longitudinal feed range: 0.002 to 0.067 IPR

Cross feed range: 0.001 to 0.034 IPR

Number of inch threads: 45

Number of longitudinal feeds: 17

Number of cross feeds: 17

Coolant motor size: 1/8 HP

Spindle motor size: 7.5 HP

SB1038 voltage: 440V, 3-phase, 60 cycle

Machine footprint: 19-1/2" x 82"

Working envelope: 60" x 112"

Approximate shipping weight: 3344 lbs

Standard Equipment:

Adjustable feed rod clutch

Allen Bradley electrical components

Meehanite casting, signature South Bend®3 V-bed

9" 3 jaw scroll chuck w/ D1-6 back plate

10" 4 jaw ind. chuck D1-6

12" faceplate D1-6

Safety chuck guard with microswitch shut-off

Steady rest with roller tips

Follow rest

4 way tool post

Halogen lamp

Complete coolant system

Micrometer carriage stop

Spindle sleeve MT6/MT4

Two MT#4 dead centers

Threading dial indicator

Leveling pads - 8 pcs

NSK or NTN Japanese spindle bearings

Full length splash guard

Front removable sliding chip tray

Tool set and box

Operation manual and parts list

Yaskawa G7A25P5 inverter