Item: G0788 | Model: G0788
Grizzly G0788 - 18" x 60" Toolroom Lathe
This burly lathe has been built with efficiency and precision in mind. Its massive one-piece, cast iron base, high-quality spindle bearings, and precision-ground, oil-bath lubricated gears keep vibration to a minimum even under heavy workloads, ensuring that every cut is exact. Offering a wide range of inch/metric threads and modular/diametral pitches, this lathe truly has what it takes to get the job done. It features a hardened and precision-ground Meehanite bed casting, coolant system, 4-way tool post, safety foot
brake, safety chuck guard with microswitch shutoff, and one-shot lubrication. Standard equipment includes 10" 3-jaw universal chuck, 12" 4-jaw independent chuck, 14" faceplate, ball bearing steady and follow rests, and dead centers.
Features:
Features:
- Universal quick-change gearbox for inch and metric threads, plus modular and diametral pitches
- Hardened and precision-ground Meehanite bed casting
- Quick-change and apron gears run in an oil bath
- Safety chuck guard with microswitch shutoff
- 10" 3-jaw chuck with 2 sets of jaws
- 12" 4-jaw independent chuck with reversible jaws
- 14" Faceplate
- Two MT#5 dead centers (1 carbide-tipped, 1 HSS)
- MT#5 - MT#7 center sleeve
- Follow rest
- Steady rest with roller tips
- Leveling pads
- Quick-change tool post with 2 tool holders
- Service tools
- Toolbox
- Swing over bed: 18"
- Swing over gap: 27-1/8"
- Swing over saddle: 10-3/4"
- Distance between centers: 59-1/16"
- Spindle nose: D1-6 Camlock
- Spindle nose taper: MT#6
- Spindle bore: 2-1/4"
- Tailstock barrel taper: MT#4
- Tailstock barrel travel: 5"
- Cross slide travel: 11-1/4"
- Compound travel: 5"
- Max. tool bit size: 3/4"
- Motor: 7-1/2 HP, 220V, 3-phase, 20A
- Number of speeds: 12
- Speed range: 25 - 2000 RPM
- Width of bed: 11-13/16"
- Range of threads (inches): 60 @ 2 - 112 TPI
- Range of threads (metric): 41 @ 0.1 - 14mm
- Cuts LH threads
- Approximate shipping weight: 4663 lbs.
- Please Note: Due to the size and weight of this machine, a flatbed truck or dock delivery is required. This cannot be delivered via the optional liftgate service.
Actions for Products including purchasing, availability and wishlist
Accessories and Related Products
Accessories
-
-
-
-
-
Product detail tabs
Overview
This burly lathe has been built with efficiency and precision in mind. Its massive one-piece, cast iron base, high-quality spindle bearings, and precision-ground, oil-bath lubricated gears keep vibration to a minimum even under heavy workloads, ensuring that every cut is exact. Offering a wide range of inch/metric threads and modular/diametral pitches, this lathe truly has what it takes to get the job done. It features a hardened and precision-ground Meehanite bed casting, coolant system, 4-way tool post, safety foot
brake, safety chuck guard with microswitch shutoff, and one-shot lubrication. Standard equipment includes 10" 3-jaw universal chuck, 12" 4-jaw independent chuck, 14" faceplate, ball bearing steady and follow rests, and dead centers.
Features:
Features:
- Universal quick-change gearbox for inch and metric threads, plus modular and diametral pitches
- Hardened and precision-ground Meehanite bed casting
- Quick-change and apron gears run in an oil bath
- Safety chuck guard with microswitch shutoff
- 10" 3-jaw chuck with 2 sets of jaws
- 12" 4-jaw independent chuck with reversible jaws
- 14" Faceplate
- Two MT#5 dead centers (1 carbide-tipped, 1 HSS)
- MT#5 - MT#7 center sleeve
- Follow rest
- Steady rest with roller tips
- Leveling pads
- Quick-change tool post with 2 tool holders
- Service tools
- Toolbox
- Swing over bed: 18"
- Swing over gap: 27-1/8"
- Swing over saddle: 10-3/4"
- Distance between centers: 59-1/16"
- Spindle nose: D1-6 Camlock
- Spindle nose taper: MT#6
- Spindle bore: 2-1/4"
- Tailstock barrel taper: MT#4
- Tailstock barrel travel: 5"
- Cross slide travel: 11-1/4"
- Compound travel: 5"
- Max. tool bit size: 3/4"
- Motor: 7-1/2 HP, 220V, 3-phase, 20A
- Number of speeds: 12
- Speed range: 25 - 2000 RPM
- Width of bed: 11-13/16"
- Range of threads (inches): 60 @ 2 - 112 TPI
- Range of threads (metric): 41 @ 0.1 - 14mm
- Cuts LH threads
- Approximate shipping weight: 4663 lbs.
- Please Note: Due to the size and weight of this machine, a flatbed truck or dock delivery is required. This cannot be delivered via the optional liftgate service.