Grizzly G1030Z2P - 3 HP Dust Collector with Aluminum Impeller - Polar Bear Series
Free shipping within the Contiguous United States.
Sales of this outlet item are limited to quantity on hand.
CSA certified meeting CAN/CSA C22.2 #243-M91; UL 1017-4th standards!
Optional Replacement Bags: G5556 Upper Bag; T20543 Lower Bag
Accessories and Related Items:
You May Also Like:
Customers who purchased this item also purchased:
10 Customer Reviews (4.9 out of 5 stars): Sign in to write a review
I bought this because my 2hp could not pull thru a cyclone that I added fast enough\r\napparently I bought too big of a cyclone because the this three hp does better but still not enough\r\npiped both the 2hp and 3 hp to a tee on top of the cyclone, \r\nboth machines plug into the same receptacle which is automatically turned on by the saws, etc in my shop\r\nNOW the cyclone really works good, packs the dust in the bag underneath it\r\nI would recommend buying this dust collector with the better filters to use by itself. \r\nAs this is what I wish I had done instead of buying a cyclone and then running two dust collectors to make it work right(two much air flow wasted in the cyclone) \r\n
I bought this dust collector to replace another brand that wore out got it hooked up and have used it a couple times, it really has a lot more suction than the old one. I'm 100 %satisfied with this purchase as I am with the other grizzly products that I own.
Bought this one to add to my existing system which was a G1029 rated @ 1600CFM and a 2HP motor,12" impeller. I need more power to accommodate my 4-head moulder which generates a tremendous volume of chips. This one is rated @ 2300CFM, 3HP with a 12.75" impeller and is set up to operate in parallel with the original collector connected to the 2 ports ejecting fewer chips and the bigger one taking the majority from the other 2 ports. I also use the larger one to evacuate chips from my 20" planer and the smaller one for the jointer, table saw, shaper or straight line rip saw. This works great as I can run one or the other or both simultaneously for whatever is needed without using a ton of power.
We had to wait two months for delivery, but we knew that when we ordered. Box arrived, assembled quickly and works great.
I love how much airflow I get out of this thing, especially after I dumped the 3x 4in inlet and am now piping air through 7" ducting. The whole unit came together easily. My only problems with the unit is the placement of the switch, and the inlet. I would like the outlet at the end of the whole cart, rather than in the middle of the long side. The switch is mounted right on the motor, which means I have to bend down to turn on the unit. When I hooked hose straight to the inlet, I had to reach behind the unit to turn it on. If it was mounted on a plate above the wye of the outlet, it would improve it. Ideally the inlet would be on the end of the cart, as I say, because now I have to keep the whole unit about a foot away from the wall to make room for a 7" elbow.