Grizzly   |  Model: G8750
6" x 18-1/2" Compound Slide Table
Price: $149.95
Recently Added ×
You May Also Like

Grizzly G8750 - 6" x 18-1/2" Compound Slide Table

click to zoom

tap to zoom

See this item in our 2017 Main Catalog!
Buy Now!
Freight:  Freight
Oversize:  Oversize
Monthly payments as low as . Learn More
This 6" x 18-1/2" Compound Slide Table features 12" of longitudinal travel and 7-1/2" of transverse travel, adjustable gibs, dovetailed ways, dependable Acme screws, vernier scales and 9/16" T-slots. 5" overall height.
Show More...

Accessories and Related Items: View All

You May Also Like:

Customers who purchased this item also purchased:

18 Customer Reviews (4.6 out of 5 stars): Sign in to write a review

5/ 5stars

I use this on my wood lathe for cutting cylinders. It's a fantastic piece of equipment at a great price. I researched cross-slides for a long time before purchasing this one and found it to be about the best value for the money in terms of available XY travel. See the picture below for my specific application.

5/ 5stars

This is a great compound slide table, I am impressed with the quality

Great quality
5/ 5stars

I use this in my guitar shop. I made a mount for a guitar repair vise to hold the head stock to drill the tuner holes. I can dial in the exact positions quickly and accurately every time.

Great Product!
5/ 5stars

Excellent packaging, item shipped in plywood create with 2 inch foam throughout. Product works exactly as expected and should provide years of quality service.

Good Value
5/ 5stars

Bought this for a particular job. A little fussy to assemble, getting handwheels to fit properly takes some time but performs well and very cost-effective.

5/ 5stars

I purchased this for my drill press to have a larger slider. Some easy assembly and clean up. It works quite well and I'm very satisfied with it.

Wonderful addition to the shop
5/ 5stars

I have used this several times now for different projects, both wood and metal and find the product solid and very workable. it is not nearly as accurate as the x-y table on my mini-mill, but on the floor mounted drill press i have a nearly infinite z-axis which i needed for larger pieces unsuitable for a mini-mill.

great product
5/ 5stars

modified existing table system on my mini mill. This made the job much easier and made for a good mod.

5/ 5stars

This mini mill table has been excellent for me! I have owned it for about a month and have made quite a few reasonably precise parts from it. Tightening the gibs properly and proper torque on the x and y shaft nuts is an important part of making this work well. This table has much more travel then other comperable priced tables also. I have recommended this to many people as it is well worth the $150.

Exactly what I wanted!!
5/ 5stars

Received my table about 1 week ago. Extremely happy with it. Does everything I need it to. Perfect item if you don't have the funds to shell out on a mill, even though I wish I did. Would highly recommend investing in one for this price. Makes a drill press so much more accurate and easy to use.

Poor quality and needs a lot of work to get it into a state of "use".
2/ 5stars

I should have paid more attention to online reviews of this Table that is manufactured in China. If you already have a Milling machine, then getting this product ready for use wouldn't be as much trouble. It is not a very well machined tool, even for a $150 product. The T-slots on my product were inconsistently cut (on both slots and even end-to-end within a slot). My Table (as others have reported) will not accept the recommended 5/8" T-slot Nuts. The slots are milled too narrow, so maybe save yourself some headaches and milling work and purchase the 9/16" T-slot Set. There is no way that someone at the manufacturing plant ever slid a 5/8" T-slot Nut into either of the T-slot channels on my Table. That is unacceptable to me and should be a basic check that should be done.

The Leadscrew Support Blocks (on the lateral axis) are cut too wide and actually overlap the inside edges of the T-slots. So the Support Blocks on my Table also would need to be milled flush to allow any T-slot nut to be inserted.

The entire table is very loaded with oil and grit, so plan on dismantling the entire thing to give it a proper cleaning before use. If you are looking for a table with smooth Ways, this Table was not milled to that level of quality. The Ways are semi-smooth to rough and again there is no consistency in the machining from one end of a Way to the other.

If I were Grizzly, I'd drive much better quality from the plant in China. If they really do use ISO 9001 practices, it is time to enforce it with the lack of quality on these Tables. From my perspective, the hours that I have spent and will spend to get this Table into operation far exceed anything that would be considered "reasonable". I would have been willing to pay more for this product to get better quality that what is currently being offered.

I do give very positive words to Grizzly Support for their understanding and positive attitude when I called them to report these issues. They do admit that at this price-point, you can expect to see what I've seen with my Table. So, I'd say only buy it if you are willing to accept all the corrective work that will likely accompany the purchase.

I hope that Grizzly will post this review because what I'm sharing is true of my purchase and not at all inflated. If you take the time to read reviews of this product online (Amazon and other places), you will see very similar comments.

Way better than my old XY vise
4/ 5stars

The slide table has a little more play in it than I expected, but it is more than adequate for my intended use which is hole drilling with my G7948 drill press. I use my milling machine for mill work, but I suppose that someone could use it for non-precision very light milling.

No Mill Table...But works for the DP!
4/ 5stars

It's not as precision an XY cross slide you'd use on a mill, but is great for most of the work I do on the drill press. Actually its a super accessory for my drill press when drilling multiple holes in a line up or bolt pattern, saves a lot of raw by hand set up time on work with multiple holes to be drilled.

Good item
5/ 5stars

It is exactly what I needed and ordered. Works great!

Good Product
5/ 5stars

two comments: web at time of writing suggests G1076 clamping kit. first, the t nuts in G1076 are (.989) wider than the G8750 table slots (.983), do not fit. Called tech support and they are sending me 9/16" t nuts since I do not have an end mill to grind them down. second, watch the keys. There are two keys in inserted on the x-axis and one on the y-axis shaft. When unpacking my y-axis key fell out. Found it, but just a heads up on the keys.

Animation for G8750