These machines were developed in collaboration with James Goodall, a famous luthier, who wanted a machine that could sand very short and very thin pieces. The main features that enable it to process short pieces efficiently are the single drum and the double infeed and double outfeed pressure rollers that are tucked in closer to the drum. The result is that you have continuous downward pressure on extremely thin stock as short as 14" (G0582). That is the distance between the first infeed and first outfeed pressure rollers. The feed belt is made of harder rubber to prevent distortion of thin stock while sanding. What follows is that you get perfectly parallel sanding in any thickness of stock. The new platen model will sand stock as short as 9" (G0445). All three models include features like digital read out, powered table elevation, four screw jacks for table support, variable speed, disc brake stopping system, dust proof photo electric eye/pneumatic control for belt oscillation, and separate motors for the drum, the feed rollers, and the table elevation.

Features:

• Convenient control panel with separate switches for each motor
• Load sensing system
• Disc Brake system for emergency stops~Double infeed and outfeed pressure rollers
• Variable feed speeds
• Easy belt change
• Pneumatic sanding belt oscillation control
• Digital readout accurate to within 0.005"

Specifications:

• Sanding belt motor: 10 HP, 220V~Feed motor: 1 HP
• Table elevation motor: 1/4 HP Harder feed belt
• Sanding Belt: 25" x 60"
• Drum speed (G9962z/zx): 3,500 FPM (G0582): 2,500 FPM
• Conveyor speed: Variable 15-49 FPM
• Maximum board dimensions: 24-3/8"W x 6"H
• Minimum board dimensions: 14"L x 1/8"H (single drum models)
• Approximate shipping weight: 1573 lbs.