Grizzly   |  Model: G1079R
16" Drum Sander w/ Rubber Conveyor
Price: $1,250.00
Recently Added ×
You May Also Like
(3)

Grizzly G1079R - 16" Drum Sander w/ Rubber Conveyor

Model:G1079R
Model: G1079R
Buy Now!
Price:
Freight:  Freight
Tariff Fee:  Tariff Fee
Oversize:  Oversize
Total:
Monthly payments as low as . Learn More
We've taken the great features of our best selling G1066 24" Drum Sander and downsized them to create our Model G1079R 16" Drum Sander. The Model G1079R features a high output 2 HP, TEFC drum motor capable of turning two 6" drums at 2100 surface feet per minute. A 1/4 HP, single-phase motor powers the sander's chain-drive conveyor mechanism. CSA certified meeting CAN/CSA C22.2 #71.2-10 and UL 987-7 standards!

Like its big brother, the 16" Drum Sander is equipped with three tough pressure rollers and two 4" dust collection ports.

Features:

  • Motor: 2 HP, 230V, single-phase, drum motor provides 2100 FPM of surface speed
  • Handles stock up to 15-3/8" wide & 3-1/2" thick
  • Minimum stock length: 9"
  • Separate 1/4 HP motor drives the industrial rubber conveyor belt at 11 FPM
  • Three pressure rollers hold stock down firmly
  • Comes with 60 and 100 grit sandpaper
  • Heavy-duty steel cabinet
  • Two 4" dia. dust ports
  • State of the art computer balanced drums
  • Powder coated paint
  • Approximate shipping weight: 304 lbs.
Show More... California Proposition 65 Warning

Accessories and Related Items: View All

You May Also Like:

Customers who purchased this item also purchased:

3 Customer Reviews (4.7 out of 5 stars): Sign in to write a review

Thomas M
After careful setup, good performance 6/1/2018

Right out of the box, with a quick setup, the machine was a disaster. After ordering and installing the Velcro conversion kit, and going through every bit of the setup and adjustment until it was as good as I could get it - success! I sanded a bunch of cedar boards and the work turned out very nice and the machine held up well. It usually took 4 passes to get the 1 x 8 boards to perfect condition, with 1/8 to 1/4 turn per pass. Any more than that, and the on-board circuit breaker will blow. 12" boards will require slower advance. I ended up taking off near 1/8" from each board to get a perfect board. Added Infeed and outfeed rollers help to minimize the snipe that occurs about 8" from each end, but this is something that has to be tinkered with. I hooked up a dedicated dust extractor at about twice the listed CFM requirement. This removed almost all airborne dust, but there is still a tremendous buildup on the rollers and belt. I found myself standing at the outfeed and brushing the heavy dust back toward the machine as the board came out, where the dust would fall into a plastic tote that I had placed below. It works best if you can fully support the board without touching it as it leaves the machine. If you want a perfect mirror finish, you will have to remove the initial 80/150 paper and install tighter paper. For my work, 150 is plenty good. The board finish can be excellent. The performance of the machine as far as amount of work between sandpaper maintenance and adjustment appears like it will be good/excellent. The dust control could be better, and that's why I gave the machine a "good" rating. This machine will improve the quality of my work, and save a lot of time. I am glad that I bought it. I considered a wider machine, but this will handle 12" width with no problems, so a wider machine is not necessary. A crazy idea would be to buy two of these, and set one up with the coarse paper, and then one with the fine paper, and run the boards through separately. Expensive, but still cheaper than the wider machine. This machine should be shipped with the Velcro kit installed as standard equipment, and not provided as an expensive upgrade. For the price, it's a great shop upgrade.

2/4/2018

Works very well, reasonable cost. I have 4 Grizzly machines all perform well

abisai T
1/24/2018

This drum sander is perfect , it make a fantastic job, I would recommend this machine to any serious wood worker, I know every grizzly machine are very well constructed, Thanks!

Ask A Question
Animation for G1079R
×