South Bend Heavy 13 - 13" x 40" EVS Lathe with Fagor DRO
This machine has been engineered from the ground up in the truest South Bend fashion & the results are extraordinary! Attention to detail begins with accurate, smooth ways, robust D1-5 spindle with Japanese made tapered roller bearings, extra-wide, flame hardened gears, pressurized headstock lubrication, variable spindle speeds–all supported on a massive cast iron base. It comes fully outfitted & ready for work: flood coolant system, halogen work light, spindle brake, steady & follow rests, 3-jaw & 4-jaw chucks & centers. This all adds up to a lathe that can hog out huge quantities of chips for best production rates or give extremely fine finishes (even second operations) in the most difficult materials to machine. This lathe includes a Fagor Digital Readout.
Swing over bed: 13.38" Distance between centers: 40" Swing over cross slide: 8.26" Swing over gap: 20" Swing over saddle: 11.02" Cross slide travel: 7" Compound travel: 4" Carriage travel: 36.5" Spindle nose: D1-5 Camlock Spindle bore: 1.65" (42mm) Taper inside spindle: MT #5 Spindle speed: Variable from 100-3000 RPM Number of longitudinal feeds: 17 Inch threads: (45) 2 - 72 TPI Metric threads: (39) 0.2 -14mm Modular pitches: (18) 0.3 - 3.5 Dianetral pitches: (21) 8 - 44 Longitudinal feed: 0.002 - 0.067 IPR Cross feed: 0.001 - 0.034 IPR Number of cross feeds: 17 Tailstock barrel diameter: 1.968" Tailstock travel: 4.5" Tailstock taper: MT #3 Floor to center height: 42.2" Height with leveling jacks: 59.06" Feed rod diameter: 3/4" Leadscrew diameter: 1-1/8" Leadscrew length: 59" Leadscrew TPI: 4 Faceplate size: 10" (optional) Max tool bit size: 3/4" Steady rest capacity: 5/16 – 4-5/16" Follow rest capacity: 5/8 – 3-1/8" Spindle motor: 5HP, TEFC Induction Voltage: 220V, 3-phase Amps: 14A / 7A Switch: magnetic with thermal protection Coolant motor: 1/8 HP, TEFC Induction Lubrication motor: 1/4 HP, TEFC Induction Base construction: Cast iron Bed construction: Induction hardened cast iron Body construction: Cast iron Headstock construction: Cast iron Headstock gears construction: Flame hardened steel Stand construction: Cast iron Footprint: 19.5" x 80.75" Approximate shipping weight: 2684 lbs. Three V-way bed 7" 3-jaw scroll chuck w/ D1-5 back plate 8" 4-jaw independent chuck D1-5 Safety chuck guard with microswitch shut-off Steady rest with ball bearing roller tips Follow rest 4-way tool post Complete coolant system Micrometer carriage stop Spindle sleeve MT #5/MT #3 Two MT #3 dead centers Threading dial indicator Leveling pads - 8-pcs. NSK or NTN Japanese spindle bearings Full length splash guard Front removable sliding chip tray Tool set & box Operation manual & parts list Yaskawa G7A23P7 inverter