This machine has been engineered from the ground up in the truest South Bend fashion & the results are extraordinary! Attention to detail begins with accurate, smooth ways, robust D1-5 spindle with Japanese made tapered roller bearings, extra-wide, flame hardened gears, pressurized headstock lubrication, variable spindle speeds–all supported on a massive cast iron base. It comes fully outfitted & ready for work: flood coolant system, halogen work light, spindle brake, steady & follow rests, 3-jaw & 4-jaw chucks & centers. This all adds up to a lathe that can hog out huge quantities of chips for best production rates or give extremely fine finishes (even second operations) in the most difficult materials to machine. This lathe includes a Fagor Digital Readout.
Specifications:Swing over bed: 13.38"Distance between centers: 40"Swing over cross slide: 8.26"Swing over gap: 20"Swing over saddle: 11.02"Cross slide travel: 7"Compound travel: 4"Carriage travel: 36.5"Spindle nose: D1-5 CamlockSpindle bore: 1.65" (42mm)Taper inside spindle: MT #5Spindle speed: Variable from 100-3000 RPMNumber of longitudinal feeds: 17Inch threads: (45) 2 - 72 TPIMetric threads: (39) 0.2 -14mmModular pitches: (18) 0.3 - 3.5Dianetral pitches: (21) 8 - 44Longitudinal feed: 0.002 - 0.067 IPRCross feed: 0.001 - 0.034 IPRNumber of cross feeds: 17Tailstock barrel diameter: 1.968"Tailstock travel: 4.5"Tailstock taper: MT #3Floor to center height: 42.2"Height with leveling jacks: 59.06"Feed rod diameter: 3/4"Leadscrew diameter: 1-1/8"Leadscrew length: 59"Leadscrew TPI: 4Faceplate size: 10" (optional)Max tool bit size: 3/4"Steady rest capacity: 5/16 – 4-5/16"Follow rest capacity: 5/8 – 3-1/8"Spindle motor: 5HP, TEFC InductionVoltage: 220V, 3-phaseAmps: 14A / 7ASwitch: magnetic with thermal protectionCoolant motor: 1/8 HP, TEFC InductionLubrication motor: 1/4 HP, TEFC InductionBase construction: Cast ironBed construction: Induction hardened cast ironBody construction: Cast ironHeadstock construction: Cast ironHeadstock gears construction: Flame hardened steelStand construction: Cast ironFootprint: 19.5" x 80.75"Approximate shipping weight: 2684 lbs.
Standard Equipment:Three V-way bed7" 3-jaw scroll chuck w/ D1-5 back plate8" 4-jaw independent chuck D1-5Safety chuck guard with microswitch shut-offSteady rest with ball bearing roller tipsFollow rest4-way tool postComplete coolant systemMicrometer carriage stopSpindle sleeve MT #5/MT #3Two MT #3 dead centersThreading dial indicatorLeveling pads - 8-pcs.NSK or NTN Japanese spindle bearingsFull length splash guardFront removable sliding chip trayTool set & boxOperation manual & parts listYaskawa G7A23P7 inverter