Grizzly   |  Model: G0761
Heavy-Duty Benchtop Mill/Drill with Power Feed and Tapping
Price: $2,095.00
Recently Added ×
You May Also Like
(8)

Grizzly G0761 - Heavy-Duty Benchtop Mill/Drill with Power Feed and Tapping

Buy Now!
Price:
Freight:  Freight
Oversize:  Oversize
Total:
Monthly payments as low as . Learn More
Looking for a Benchtop Mill/Drill with tapping capabilities that can rival the accuracy and rigidity of a knee mill? Then take a good look at this machine! With the dovetail column, table ways, and high-precision P5 spindle bearings, you’ll be making perfect cuts all day long with repetition and ease. Changing spindle speeds is fast and simple with the gearbox levers, and getting the perfect table feed is as easy as dialing-in the variable-speed power feed on the 9-1/2" x 32-1/2" table. This Heavy-Duty Mill/Drill with Power Feed has it all!

Specifications:

  • Motor: 2 HP, 220V, 1-phase, 8.6A
  • Swing: 20-1/4" • Max. distance spindle-to-table: 18-1/8"
  • Table size: 9-1/2" x 31-1/2"
  • Table travel (X-, Y-Axis): 22", 7-1/2"
  • Head travel (Z-Axis): 13-3/4"
  • Spindle travel: 4-3/4"
  • Spindle speeds: 6, 90–1970 RPM
  • Spindle taper: R-8
  • Head tilt: 45° left & right
  • Table T-slots: 1/2" wide, 3-1/8" OC
  • Overall size: 49-5/8" W x 57" H x 30-3/4" D
  • Base footprint: 17-3/4" W x 21-5/8" D
  • Approximate shipping weight: 714 lbs.

Features:

  • Reversible spindle & tapping controls
  • Longitudinal variable-speed power feed
  • High-precision P5 spindle bearings
  • Table is coolant-system ready
  • Dovetail ways, each with adjustable gibs & dual locks for accuracy
  • Coarse/fine spindle downfeed with stops
Show More...

Accessories and Related Items: View All

You May Also Like:

Customers who purchased this item also purchased:

8 Customer Reviews (4.4 out of 5 stars): Sign in to write a review

Disappointed with hand ground with hand grinder fit
2/ 5stars

I purchased this mill new from Grizzly. The head can be adjusted for different angles left and right. I zeroed this adjustment to zero degrees easily. I checked the nod, and it is off .009" from front to back. I contacted customer service and was told that I could shim the column, while separating the column from base, I found where the factory had hand ground the base with a hand grinder to try to adjust the nod closer to zero. I guess this shows that how far off zero this was, was essentially good enough. I purchased shims and adjusted it to .001" in an 8" sweep. The hand grinding on this "precision" machine was disappointing. Makes me very skeptical that another one of the same model would be any better or worse.

High Quality
5/ 5stars

This is my first mill that I have owned. It has surpassed all of my expectations. I would recommend this mill to any one looking for high quality mill at an affordable price. Thank you Grizzly for putting together a fine piece of machinery.

5/ 5stars

First mill I have purchased and am quite pleased. It has performed well and exceeded my expectations. Great beginner to intermediate mill.

Little Issues, slow service
3/ 5stars

I bought this mill a month ago. I did the break in procedure and the power switch began malfunctioning intermittently. Not sure if this will remain a problem or not. The mill is very noisy in high range. The nut on the T-bolt was not the right one and it would not tighten down - just slipped on the threads. Also the power feed was defective from the get go. The people at Grizzly were very helpful, but the replacement process for the power feed was very slow. Still don't have the power feed back or the nut.


With the trouble I've had I haven't had a chance to use the machine much, so can't say much about its function, but seems like a solid machine for the money.

Very Nice Mill
5/ 5stars

Very happy with this mill. I purchased it after months of looking at similar and smaller mills. It was delivered undamaged in a very substantial crate with no shipping damage. Setup went quickly with no problems. Testing for nod and tram showed less than .002in out in tram and .001in in nod. A very small adjustment to the head tilt brought the tram to less than .0002in about as small as I could measure. I have not attempted to correct the nod as it is too small to accurately correct using my measuring tools. This is very good for a new machine right out of the box. The table surface grind is consistent with not more than about .003in runout over the surface, mostly around the t slots. Very acceptable for my purposes.

All the accessories are of good quality and fit the machine well. I purchased the stand for this machine and find that it is a little low for my liking. I will probably add a section to the bottom to make it higher in the future. It is nice having the extra storage under the mill and it is well made, heavy welded steel and cast iron.

First cut was on a piece of A36 steel using an old .5in high speed steel end mill. The machine did not slow even when I purposefully overloaded the old dull end mill. Lots of power for a bench top machine, more than I will ever need. I really like the long table and travel length. Having the power feed is a big plus.

I purchased the Grizzly 6in mill vice and it works very but a smaller 4 or 5-inch vice would be a better fit.

Quality Machine
5/ 5stars

Bought this in November 2016, leveled the mill and trammed the head then surface milled a piece of 3/4x3x10" steel. After milling both sides I checked for accuracy in the thickness, was .0005 in the 10"s. Really happy with this mill. The only thing I wish it had is a power feed for the head. Will serve me well.

A Beast of Machine
5/ 5stars

It was delivered in 4 days, WOW. I was very impressed on the casting and paint job of this mill. With the 2hp motor, you have plenty of power for any job that comes your way. After breaking in the gears and bearings, it's a very smooth running machine. And has a rigid feel to it. The power feed was a great added feature for those long milling cuts. The x,y, and z axis have very little play in them.
My only complaint was the power feed went out first time I used it when truing up my vise. ASONG has problems with the variable speed control (potentiometer). I called Grizzly, and they sent me a whole new unit for replacement. And it works great. Love the G0761 milling machine and would recommend it highly.

Fantastic machine. Great features. Unbelievable value.
5/ 5stars

We needed a transitional mill for prototypes and light production, but we didn't want to commit the cash or space for a knee mill. After carefully comparing all available drill/mill models, we settled on Grizzly because of their customer service, quality and completeness of documentation and the practical range of machines they offer. Ultimately we felt that the G0761 would be best because it's a substantial machine, the traditional gearbox would offer the full power of the motor at any speed, and the controls would be simpler (with less to go wrong in the long run). We could not be more impressed with the unit! It showed up well packaged with clear instructions. Setup, clean up and commissioning were a snap. AND, all of the peripherals (vice, collets, tooling, etc.) are PERFECTLY matched for the machine with no adjustments. The machine operation is smooth. Out of the box, the machine has 0.004" backlash on X and Y axes which is excellent for standard lead screws. The spindle has no radial backlash and, when FULLY extended (5") it deflects less than 0.001" radially with 25 lbs applied at the lower end. In short, it's a very tight and sturdy machine which seems to have made the very most of its 700+ lbs of iron. If you're nervous about rough castings, poorly machined ways, missing parts, poor documentation, or lost-in-translation nonsense, fear not! Grizzly has been awesome to deal with. The G0761 is incredible value for the money and I'd endorse it any day of the week.

Animation for G0761
×