General Tool 870 - Mortise and Tenon Jig
click to zoom
Attention California CustomersWARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to:
Need it by Fri. Apr 28th?
Just order by 2:00 PM PST today and choose expedited shipping during checkout.
This trailblazing tool provides a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig. Designed in-house by Generals engineering team, the Model 870 jig is ready to use right out-of-the-box to produce 1/4" mortise and tenon joints for cabinets, furniture and frames. Included are the bushings for also producing 3/8" and 1/2" joints. Using a plunge router with the jig, woodworkers can cut fully aligned mortises and tenons ranging from 1/4" to 1/2" wide and from 1 to 3" long. The unit can be mounted directly on a workbench or onto a board that can be clamped in a vise or to a bench. The Mortise & Tenon Joint has been used for thousands of years. But not until now did someone figure out a way to provide a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig. The General EZ Pro Mortise & Tenon Jig is the answer! The jig comes completely assembled and is ready to use right out-of-the-box to produce the widely used 1/4" mortise and tenon joint. Using a plunge router with the jig, woodworkers can quickly and easily cut both mortises and tenons ranging from 1/4" to 1/2" thick and from 1" to 3" wide. The unit can easily handle stock ranging from 1/2" to 1-1/2" thick and can cut multiple mortises in a single long piece.