View Product
Animation for G0634XP
Your Cart ×
Estimated Total: Checkout Now
Item #: G0634XP
Model # G0634XP
This Combination Machine is similar to the G0634Z, except it sports our popular Polar Bear colors. It also has an end-mounted fence, so you can work as close to your shop wall as possible. This feature is a real space saver, and since this is a combination machine, you're saving shop space already. You'll also love the 12" wide jointer capacity, spiral cutterhead, and quick conversion from jointer to planer. For squaring up both sides of lumber up to 12" wide, you can't beat this machine!


  • Motor: 5 HP, 220V, single-phase, 25A
  • Jointer table size: 14" x 59-1/2"
  • Cutterhead: Spiral, 32 inserts
  • Cutterhead insert size: 15 x 15 x 2.5mm
  • Cutterhead diameter: 3-1/8"
  • Cutterhead speed: 5034 RPM
  • Maximum jointer depth of cut: 1/8"
  • Maximum width of cut: 12"
  • Cuts per minute: 20, 136
  • Fence: 6" x 51-1/4"
  • Bevel jointing: 0° - 45°
  • Switch: Magnetic with thermal protection
  • Power transfer: Twin V-belts
  • Bearings: shielded and lubricated
  • Floor-to-table height (Jointer): 35-1/2"
  • Dust port size: 4"
  • Planer feed rate: 22 FPM
  • Maximum planer depth of cut: 1/8"
  • Maximum planer cutting height: 8"
  • Planer table size: 12-1/4" x 23-1/8"
  • Overall size: 67-1/2" W x 24" D x 41-1/2" H
  • Footprint: 26" x 19-1/2"
  • Approximate shipping weight: 704 lbs.

7 Customer Reviews (4.4 out of 5 stars) : Sign in to write a review

Anonymous Reviewer
08/01/2019 9:44:41 AM

No feedback given

Anonymous Reviewer
Excellent machine. 08/10/2018 11:57:55 AM

I'm getting used to the height of the jointer - it will be about 8" to 10" higher than a normal jointer bed, so it feels very different to me. However, the jointing is smooth and the planing works well too. I had to make a small adjustment to the kill switch (the machine shuts off if the tables are lifted - which is good. However, the switch was set such that the machine wouldn't turn on even when the tables were down. It took me a while to trace that out, but it was easily adjustable.

Anonymous Reviewer
Sweet 04/25/2018 3:12:57 PM

I have names for all of my large tools and my daughter asked me what was thename. I told her the Beast. Ive only had this machine for a month and can say it has the cleanest cut. Ive run oak, maple, pine and cedar through it. Ive exam them under great and can said I dont think I would have to sand at all. I would highly recommend

Anonymous Reviewer
02/07/2018 11:16:45 PM

No feedback given

John G
Pretty much what the Doctor Ordered A Solid A- to B+ 01/26/2018 4:16:00 AM

Overall - love it but if I give 5 stars I can't give constructive feedback....

The planer runs a bit fast so snipe can be an issue but this can be fixed by doing a final very slow pass on the jointer so leave room to do so. Power is awesome, noise is minimal for all that power. Surprised that the helical cutterhead has so few cutters on it. I would pay more to get a few more but again if you move the wood slow enough it is a non issue.

Changeover is easy and it seems to keep its adjustment but I only have a couple large projects done so that remains to be seen.

I added the Wixey digital height gauge - pretty much a requirement to do precision work and I am surprised something like it is not an option when you buy.

This is the one to buy if you keep it against the wall so pay attention to that issue as the other one needs more space behind it.

Dust collection is so-so but no worse than anything else I own. I have a 3 hp dust collection system that sucks like crazy and I am constantly amazed at the bad design in pretty much every dust connection on every tool I use regardless of brand.

I did a lot of research before settling here and for a home woodworker who occasionally does large production runs this is the best value out there. There are other units in this price range but overall I think I like the fence and guard and ease of change better than the competitors by enough to buy this one instead of those.
You might do better by spending twice as much but you are more likely to spend three times as much to improve on what you get here.

Nathaniel H
Mmm...Not sure 06/22/2017 3:51:10 AM

Bought, shipped same day, arrived 2 DAYS LATER. Damn, that is some fast shipping! Arrived completely intact, no damage. Unpacked it, assembled mobile base and started assembling/checking out the fit and finish. This is where I find myself at least preliminarily a little bit wary of a few things. First thing I have to say is that I've never had to spend as much time and sweat to clean off the industrial oil used as a rust barrier from the manufacturer. This stuff was CAKED on and dry, not oily but more like it was baked on there in a 1/16" layer. Worse was that it was also all over the cutterhead and knives! After about an hour with a combination of large quantities of solvents, 3M pads, and a lot of cursing, I was finally able to get most of it off, though certainly some still lingers on the cutterhead because that's just not an easy part to clean. I find this pretty obnoxious. Second, while cleaning both the jointer tables and planer table underneath, it gave me some time to check out the machine. Fit and finish is not super impressive, paint spray on some parts that it shouldn't be on, some small chips in the paint missing in some areas, plastic caps on the fence mount arm look like they were cut by a three year old in a hurry. The fence is aluminum--albeit heavy aluminum--and while the end mount style fence is a feature I like I would prefer there to be some kind of reinforcement close to the cutterhead to stop any variation as well as a heavier duty, cast iron fence. I don't see why the end mount wasn't designed so that it could rotate up and away with the table so that one doesn't have to remove the fence every time switching to planer mode, and then reseat and recalibrate the fence when returning to jointer mode. I have no idea what the heck the plastic "rear guard link" is supposed to achieve since it's not attached to anything, and also WHY IS IT PLASTIC?! Delivered to my door, I paid $2,900 for this: I DON'T WANT TO SEE PLASTIC PARTS ON MY MACHINE. Some machines right off of the truck just blow me away by how well setup and calibrated from the factory they are and this truly makes my life so much easier. Not so with the G0634XP. Basically just need to recalibrate as the tolerances aren't tight enough in the parallelism/coplanar realm of things. One other thing is the Shop Fox Heavy Duty Mobile Base I purchased with this: it's bad. Not because the base doesn't what it should, but because the casters are terrible. Moving this thing around on my flat concrete floors is like pushing a 500lb rock in sand. Needs beefier casters, don't see why there can't be all 4 swivel casters instead of 2 swivel and 2 fixed on it as well. All that being said...

...I haven't ran it through it's paces yet, and I'm sure once I get it calibrated and up to snuff I'll be happy enough. Given that this particular machine was awarded "Best Overall" by Finewoodworking in the combo machines category, I'm not pleasantly surprised by the quality right away and currently am maybe wishing I had just ordered one of the parallel bed jointers instead of a combo machine, but hopefully I'll get used to it and everything will work. We'll see!

Anonymous Reviewer
5hp 12" spiral jointer planer 06/01/2017 7:16:08 PM

Ordered. Received quickly. About one week. This machine works excellent. Leaves a nice finish. I use about 5-10 times a week. Small lumber, fat lumber. I've planed down to as little as 3/16". I've put some exceptionally hard oak through with results that are pleasing. A real quality machine. It's cheaper than comparable machines with a fair shipping price. I will definitely be buying more
Grizzly products. Probably a large bandsaw or tablesaw.