View Product
Animation for T24785
Your Cart ×
Estimated Total: Checkout Now
  • Length: 131-1/2"
  • Width: 1/2"
  • Type: Carbide-embedded
  • TPI: 3 Hook
  • Gauge: 0.025"

We have many combinations of blade widths and pitch from the smooth cutting raker tooth to the efficient skip tooth and the aggressive hook tooth styles. Top quality saw steel manufactured to precise tolerances and guaranteed welds result in very smooth cutting blades. Blades are sized to fit Grizzly bandsaws as well as many other brands. Just match up the length in the charts with the recommended length for your bandsaw. If you need more information to help match blade cutting characteristics with your particular applications, just call our friendly service technicians.

Blade Selection: Selecting the right blade for the cutting task requires knowledge about blade characteristics and cutting priorities (i.e. speed, finish, etc.).

  • Blade Length: Measured by the blade circumference, blade lengths are specific to each bandsaw. They are determined by the wheel diameter and distance between the wheels.
  • Blade Width: Measured from the back of the blade to the tip of the blade tooth (the widest point). Blade width determines the largest and smallest curve that can be cut, and contributes to the accuracy of cutting straight—generally the wider the blade, the straighter it will cut.

Tooth Set: Two common tooth sets for wood bandsaw blades are alternate and raker. Each type of tooth set removes material in a different manner, leaving cuts with different characteristics.

  • Alternate: An all-purpose arrangement where the teeth are bent evenly left and right of the blade.
  • Raker: Three teeth in a recurring group—one bent left, one bent right, and one that is not bent. The raker set is ideal for most contour cuts.

Tooth Type: The most common tooth types for wood blades are:

  • Standard (or Raker): Equally spaced teeth set at a “0” rake angle. Recommended for thinner workpieces and general use.
  • Hook (or Claw): Wide gullets (round or flat), equally spaced teeth, positive rake angle, and fast cut with good surface finish.
  • Skip (or Skip Tooth): Wide, flat gullets, a "0" rake angle, equally spaced teeth, and recommended for thick wood cutting.

9 Customer Reviews (5 out of 5 stars) : Sign in to write a review

Gerald W
Works great. 08/02/2020 1:47:55 PM

Made with precision. Didn't even have to adjust tracking going from old blade to new one.

William O
Great Product 06/21/2020 4:08:50 PM

It is the perfect blade used on my 75+ year old Poplar Mechanic DIY band saw to do Re-sawing.

Anonymous Reviewer
Excellent product ! 06/13/2020 9:13:27 PM

No feedback given

oskar K
10/25/2019 7:31:28 PM

saw blades working fine. heat hardened teeth doing great job. hope they hold up since i saw well seasoned wood for turning blocks.

can and is it worth to have blades resharpened?

Anonymous Reviewer
Great blade 02/08/2019 1:24:17 PM

Thought I would spend a little more to see if this blade was any better than your run of the mill blades I normally buy. It resaws so easily I can't believe it, very smooth surfaces too. Another thing I love about it , no thump-thump at the welded joint. This is now my blade of choice .

Don O
Cuts like butter 09/24/2018 1:58:58 AM

I needed a blade for straight rips and the occasional cross-cut, and have been happy with this one. At 3 TPI, you can see the tool-marks, but they are pretty fine, and acceptable for non-finish-work.

Anonymous Reviewer
06/06/2018 12:29:45 PM

No feedback given

Gregory T
04/27/2018 5:04:58 PM

This is a new product to me with carbide embedded in the steel blade. I haven't had it long enough to know if it is a good investment but I will find out in the next few weeks or less.

Anonymous Reviewer
01/26/2017 4:56:56 AM

No feedback given