View Product
Animation for G0778
Your Cart ×
Estimated Total: Checkout Now
We've included so many features with our 14" Industrial Re-Saw Bandsaw you'll want to read the list twice! What makes this 14" bandsaw industrial-grade quality? The frame is made of 1-piece welded and reinforced steel, which allows the machine to hold much higher accuracy tolerances because it doesn't have the frame flex or twist that can occur in bandsaws with 2-piece frames. Additionally this bandsaw has a 1-3/4 HP 110V/220V motor, computer balanced cast iron wheels, ball bearing blade guides, and a quick-release blade tension system. To sweeten the deal, we've thrown in our patented 6" tall resaw fence, which can also be installed sideways as a low profile guide for cutting narrow stock. Dollar for dollar, you just can't find a more consistently accurate 14" bandsaw that is loaded so many great features. Pick one up today and see for yourself!

Made in an ISO 9001 Factory

CSA certified meeting CSA C22.2 #71.2-10 and UL 987 8th Edition standards!


  • Motor: 1.75 HP, 110V/220V, prewired 110V, single-phase, TEFC, 15A/7.5A
  • Table size: 19-3/4" x 14-3/16" x 1-1/2" thick
  • Table tilt: 8 degrees left, 45 degrees right
  • Floor to table height: 42-1/4"
  • Cutting capacity/throat: 13-3/8"
  • Maximum cutting height: 10"
  • Blade length: 106"
  • Blade width range: 1/8" – 3/4"
  • Blade speed: 3000 FPM
  • Dust port: 4"
  • Resaw fence height: 6"
  • Bearings: sealed and permanently lubricated
  • Footprint: 21-1/2" x 18-1/4"
  • Overall size: 73" H x 29-3/4" W x 29-1/2" D
  • Approximate shipping weight: 284 lbs.


  • Powder-coated finish
  • Magnifying cursor over fence scale
  • Quick-release blade tension
  • Ball bearing blade guides
  • Precision-ground cast iron table
  • Cast iron trunnion
  • Welded steel and reinforced frame
  • Deluxe heavy-duty stand
  • Computer-balanced cast iron wheels
  • Pre-formed, hinged steel wheel covers
  • Includes 3/8" blade
  • Certified meeting UL & CSA standards

8 Customer Reviews (5 out of 5 stars) : Sign in to write a review

Anonymous Reviewer
12/06/2018 5:13:18 PM

Only issue is the tailgate fee. Hidden fee which should be included with shipping. Saw works very well.

Anonymous Reviewer
Pretty well built 10/28/2018 1:57:32 PM

The saw seams to be well built. I do have one concern though.
I've purchased two Grizzly products now and both have had damage to the lower part
of the base. On the corner of the base. Dents and paint rubbed off.
While this may seam minor and does not effect how the tools run, it is a bit frustrating.

Bryan S
Very happy with the bandsaw 08/23/2018 11:06:42 PM

Very quiet, accurate, stable, nice band saw. Glad I bought it. Wish Id bought it years ago! Bryan Skibinski, Little Falls NY

Robert E
An Excellent Bandsaw 02/16/2018 2:36:33 PM

My 35 year old Craftsman Bandsaw decided to retire itself recently. Like most, I began the search for a bandsaw that would , hopefully, get me through the next 35 years. Comparing features and price, I settled on the Grizzly G0778 Bandsaw. After a rocky start, delivery truck had no lift gate as ordered, cartons showing considerable damage, I was able to get the two cartons into my shop. My concerns began to go away when I opened the cartons. Grizzly has given a lot of thought on how to pack these heavy items. Great interior packing and no damage at all. Setup was uneventful. Trust me, unless you are a power lifter and have four arms, you will need a buddy to help get the main bandsaw unit onto the base. Fortunately, I find my neighbor always eager to help and offering a refreshment afterwards is a good incentive!
I have now had my new Grizzly G0778 in use about a month. It is a wonderful machine. Quiet and nearly vibration free. I have re-sawed and used it to make some detailed cuts and it is now my go to machine for many of the small quick cuts I need during the day. The only problem I have is the location of the on/off switch. I am constantly reaching to the area the switch used to be on my old Craftsman, but it seems Grizzly is off the hook for that because that is a "me" problem (seriously, on/off switch is in a very obvious and convenient location.)
So, bottom-line, this is a great saw and deserves your serious consideration. I have no regrets.

Brian C
Thumbs up for the G0778! 10/26/2017 11:17:35 PM

This is a great bandsaw. Assembly was a bit of a challenge, as I had no help, and I'm no spring chicken anymore. Several decades of safe moving experience got the saw up on its stand with no issues. Setup was a bit time consuming, but I'm really fussy with equipment setups. There was one broken part that Grizzly replaced in about a week, and it was just the handle on the pin that keeps the outboard side of the table level. Interestingly, the broken part of the handle was not in the parts bag, so I have to believe the part was defective when it was packaged overseas. One issue that was problematical was that the blade guides would not hold alignment with the blade when the guard was moved up and down. Grizzly tech support didn't seem to know that there are four hex screws on the back side of the top housing that can be loosened to adjust the position of the guide assembly. I was told that it was not uncommon to have to adjust the guides when changing the guard height. Had to figure that one out myself. Once adjusted, all worked well. The G0778 is smooth, fairly quiet, vibration FREE, and does an impressive job of resawing. I've taken a very consistent 0.050 inch slice from the edge of 8.5 inch high cedar with several knots. This is with a replacement blade. The original OEM blade, as is reported in numerous YouTube videos, is the definition of lackluster. I immediately replaced it with a 3/8 inch skip tooth blade, which does a very good job. The quality of the G0778 is first rate, and I'm very pleased with it. The fence system is excellent. Even with a 3/8 inch blade, the resaw performance is excellent.

Anonymous Reviewer
06/23/2017 1:16:36 PM

No feedback given

Tom W
01/26/2017 3:59:05 AM

Excellent tool thus far. Built well, great shipping.

G0778, 14" 1-3/4 HP Deluxe 110V Bandsaw 06/03/2016 1:19:12 AM

Product arrived unblemished with reasonably good assembly instructions. I also purchased the Heavy-Duty Mobile Base and I am very glad that I did. The band saw has a great place in my shop, but can be easily moved to a better position if required.

It is much easier to assemble with a friend; and the unit is pretty heavy for one person to assemble the saw onto the base alone. Problems: While the unit was beautifully packaged, one of the LOCK KNOBS M10-1.5 was not tapped. I had to look up the unit and tap the hole in my shop with a metric tap M10-1.5. I happened to have the taps on hand. Looking up the tap size was very easy as Grizzly provides all that info at your finger tips on the product page. The unit ran great right away. Clean the table with a rag and a little paint thinner. This is a beautiful Machine.

However the unit greatly needed to be tuned in. Watch a few video's on tuning in a band saw. I had to take the table back off and tune in the bottom rollers first. To Tune in the top rollers I had loosen the ones the 4 silver Phillips head screws (way up at the top) that allowed me to move the entire guide over to the right and bringing the left Bearing very near the blade. Maybe .030 inches or less from the blade touching it. I did not see anyone else do this on the tuning in videos. Once I tuned in the bearings and set the Resaw fence to counter blade drift I was able to Resaw a simple 2 X 4 at @ .140 inches thick with thickness variance of less than a few Thousands of an inch anywhere across the surface of the veneer like piece. This fence is a dream to set as it is heavy duty with 4 hex head screws that really hold. And this was achieved with the blade that came with the unit. Imagine if you used the correct blade. Before tuning it in I could not resaw a straight line cut at all. Once the tuning in of the new Band saw was done I wanted a practical Band saw project. I chose to make some wonderful Adirondack Chairs. Lots of curves in this work. Of course the Band saw did this very well.

Oh and I chose this model as I have not ran 220 volts out to the shop yet. Otherwise I may have purchase the 2 horse and ran it on 220 volt. Or may have chose the 17" model which is not that much more money. But I wanted a 110 volt band saw that I could roll out onto the Driveway for bigger resawing jobs as well.

Q & A

Common Questions and Answers about the G0778:

Q: Besides the obvious difference in shape between this 14" bandsaw and your lower priced 14" bandsaws, what makes this one an "Industrial" bandsaw? Why is it more expensive than the G0555X?

A:The additional expense is mostly due to the larger motor and one-piece welded-and-reinforced steel frame with enclosed cabinet stand for storage. This type of frame is much stronger and does a better job resisting flexing or twisting pressures that all bandsaw frames are subjected to, due to the high amount of stress from the blade being tensioned between the wheels and the dynamic loading that occurs while cutting. The robust frame on this saw puts it into an "Industrial" class, because it will hold cutting accuracy much longer than saws with 2-piece cast-iron frames--without requiring frequent adjustments or service.

Q: What is the advantage of having double ball-bearing blade guides over singles?

A:Double ball-bearing guides don't provide any advantages for 1/2" or smaller blades, but they do provide a much greater level of support for 3/4" and wider blades. This is important if you're planning on doing a lot of resawing or other straight cutting where a high degree of accuracy is needed.

Q: What is needed for converting this machine to 220V?

A:First, review the circuit requirements in the Owner's Manual to make sure you have the appropriate 220V power supply circuit and wall receptacle installed in your shop. Converting the machine to 220V involves (1) disconnecting saw from power supply, (2) cutting off existing power cord plug, (3) reconfiguring wire connections inside the motor junction box, and (4) installing the appropriate 220V plug (see Owner's Manual for full details). CAUTION: To reduce the risk of electrocution or fire, only an electrician or qualified service personnel should perform this procedure.


FAQ (Frequently Asked Questions):

Q: What are the pros and cons of Cast Aluminum versus Cast Iron Wheels?

A:The heavier mass and weight of cast-iron wheels reduces vibrations and creates a flywheel-effect, which helps the blade maintain a consistent speed during heavy cuts and when resawing. The drawbacks to this added weight and mass are that it requires more energy from the motor to get the wheels and blade up to speed; and unless the saw is equipped with a brake, it also takes longer for the wheels to come to a stop after the saw is turned off. Aluminum wheels, on the other hand, are much lighter and require less time and energy to get up to speed and bring to a stop, which is why they are ideal for many hobby saws and those that will mainly be used for general-purpose rip cuts and crosscuts, such as with 4/4 (1") or thinner stock.

Q: What are the differences between ball bearing, block, and disc (a.k.a. "Euro style") guide blocks?

A:The main differences between blade guide types can be boiled down to four factors: (1) amount/quality of support, (2) amount of blade friction created from that support, (3) ease of set-up and adjustment, and (4) durability and maintenance frequency. Ball-bearing guides offer the best all-around balance of these four factors. Although they don't provide as much contact area for support as block or disc guides, they do maintain constant contact with the blade without greatly increasing friction. They are also the easiest to set up and tend to be the most durable. Disc guides provide the highest amount of contact area for support, but as with guide blocks, they must be positioned 0.004" away from the blade, which requires some type of gauge to be used for proper set up. Whereas some disc guides are fixed, similar to block guides, our Euro-Style disc guides spin with blade contact, which greatly reduces friction and the need for regular resurfacing. Block guides offer excellent support, but unless they're made from specialized materials to reduce wear or friction, they tend to fall behind the other guide types in all other categories.

Q: Can a wood bandsaw cut metal or vice versa?

A:The proper cutting speed for the majority of ferrous metals is under 300 FPM. The proper cutting speed for the majority of wood cuts is over 3000 FPM. Trying to cut metals on a wood bandsaw--at speeds 10 times faster than they should be--is dangerous and will likely result in a broken blade, damage to the bandsaw, and a really horrible cut. Cutting wood on a metal bandsaw is possible, but it would be tedious and slow, and likely would not produce a decent quality of cut. In addition, bandsaw blades for cutting wood are designed much differently than bandsaw blades for cutting metal. With that said, there are some soft, non-ferrous metals (such as aluminum) that can be cut at around 1500 FPM (if using the correct blade type). Although some of our wood bandsaws operate at approximately this same speed, the other components of these saws weren't designed to handle the metal chips and swarf that would be produced by the cut, which would likely result in minor damage to the machine and void the warranty. The bottom line is this: Always buy the right machine for the job!

Q: How do I know what type of blade I should buy?

A:Blade choice is typically determined by the type and purpose of cut, the hardness and thickness of wood, and the desired trade-offs between cutting speed vs. cutting quality. In general, a wider blade is preferred for cutting straight lines because the blade tends to wander less, and a narrower blade is preferred for cutting curves because it has a much tighter minimum cutting radius. The two main types of blade teeth are "Hook" and "Raker". Hook teeth tend to cut faster and leave rougher results, while Raker teeth tend to cut slower and leave smoother results. There are additional types of teeth, such as Skip, Positive Claw, or AS-S, that are essentially modified versions of the Hook or Raker tooth shapes, but with slight changes to the cutting angle, gullet-to-tooth ratio, tooth set, etc. to provide unique advantages for special types of cuts.

Q: What type of blade do I need for resawing?

A:Generally speaking, you'll want to use a wide blade (1/2" or larger) with "Hook" style teeth (or "Positive Claw" on Timberwolf blades) and a low number of teeth per inch (TPI). A wide blade helps ensure cuts are straight and the Hook style teeth have large gullets for removing material as the blade passes through the workpiece.

Q: Which saw is best for resawing?

A:The key specs for resawing are the maximum cutting height and a larger motor size. Due to the amount of material being cut at one time, resawing puts a lot more strain on the motor than other types of cuts, so generally speaking, the more power the better. If you're using the proper blade type (a hook-type blade with few TPI) and a modest feed speed, you can get by making the occasional rip cut using a 1 HP-2 HP motor. Otherwise, if you plan on making regular resawing cuts, you'll get the best results with a 3 HP or larger motor.

Q: My bandsaw blade came with a tag on it that said "Recommended for cutting wood or soft non-ferrous metal." Does this mean I can cut metal with my wood bandsaw?

A:Just because the blade is recommended for both wood and soft, non-ferrous metal (e.g. aluminum, copper, etc.), it doesn't mean your wood bandsaw is suitable for cutting both types of material. It is important to keep in mind that the blade you bought may also be used on other types of bandsaws, such as our G0640X or G0621X, which are specially designed to cut both wood and metal.

Q: Can I still use my bandsaw without connecting it to a dust collector?

A:Yes, this is possible, but we don't recommend it. Without using a dust collector, the dust will quickly pile up in and around your machine, resulting in additional cleaning time later. Besides making a mess, fine dust can be harmful to your respiratory system. It is a better choice to connect your bandsaw to a properly designed dust collection system that at least pulls the recommended minimum CFM from each dust port on the machine.

Q: What is the purpose of the pin that fits in the blade slot opening at the end of the table?

A:All bandsaw tables are inherently weaker on the outside half of the table. This is due to the slotted opening that allows the blade to pass through the table during blade changes. The table pin helps reinforce the two sides of the table around this slot, so they remain aligned with each other and keep the table flat. For this reason, it is extremely important to always keep the table pin firmly installed, unless you're changing blades.