View Product
Animation for G9172
Your Cart ×
Estimated Total: Checkout Now
  • Length: 62"
  • Width: 1/4"
  • Type: Carbon Tool Steel
  • TPI: 24 Raker
  • Gauge: 0.014"

We have many combinations of blade widths and pitch from the smooth cutting raker tooth to the efficient skip tooth and the aggressive hook tooth styles. Top quality saw steel manufactured to precise tolerances and guaranteed welds result in very smooth cutting blades. Blades are sized to fit Grizzly bandsaws as well as many other brands. Just match up the length in the charts with the recommended length for your bandsaw. If you need more information to help match blade cutting characteristics with your particular applications, just call our friendly service technicians.

Blade Selection: Selecting the right blade for the cutting task requires knowledge about blade characteristics and cutting priorities (i.e. speed, finish, etc.).

  • Blade Length: Measured by the blade circumference, blade lengths are specific to each bandsaw. They are determined by the wheel diameter and distance between the wheels.
  • Blade Width: Measured from the back of the blade to the tip of the blade tooth (the widest point). Blade width determines the largest and smallest curve that can be cut, and contributes to the accuracy of cutting straight—generally the wider the blade, the straighter it will cut.

Tooth Set: Two common tooth sets for wood bandsaw blades are alternate and raker. Each type of tooth set removes material in a different manner, leaving cuts with different characteristics.

  • Alternate: An all-purpose arrangement where the teeth are bent evenly left and right of the blade.
  • Raker: Three teeth in a recurring group—one bent left, one bent right, and one that is not bent. The raker set is ideal for most contour cuts.

Tooth Type: The most common tooth types for wood blades are:

  • Standard (or Raker): Equally spaced teeth set at a “0” rake angle. Recommended for thinner workpieces and general use.
  • Hook (or Claw): Wide gullets (round or flat), equally spaced teeth, positive rake angle, and fast cut with good surface finish.
  • Skip (or Skip Tooth): Wide, flat gullets, a "0" rake angle, equally spaced teeth, and recommended for thick wood cutting.

8 Customer Reviews (5 out of 5 stars) : Sign in to write a review

Anonymous Reviewer
ban saw blads were great wife loves them 09/22/2019 7:09:43 PM

No feedback given

Anonymous Reviewer
01/23/2019 6:55:29 PM

I first called the company to confirm/affirm that this blade would correctly match by older table band saw. The technician i spoke with was VERY pleasant and knowledgeable. Consequently, I ordered the blade, installed it on my saw and the saw works perfectly...THANKS Grizzly!!

Charles C
First band saw 01/19/2019 1:27:51 PM

This is my first band saw. So far everything works fine. Read the manual and went through setting up the saw, all of whuch was already done. I was cutting some walnut and oak...depending on the thickness determined the feed speed allowed. I have to remember it's a portable saw. It cut through pine with ease. Only problem that really annoyed me was the light. It'son the wrong side and when its on and pointed at the work, the glare from the table top is blinding. Maybe I will get some flat black paint and try that.

Anonymous Reviewer
So far, looks good. 01/10/2019 5:02:47 PM

Purchased for a middle school and high school FIRST Robotics program that uses my Shop to build in. We haven't used to Band saw as yet, so I cannot comment on that aspect as yet.

Anonymous Reviewer
Great blade! 11/21/2017 5:28:06 PM

I bought this when I bought my bandsaw. Good quality blade and available in 24 TPI. When I looked, I believe this is the only manufacturer that had a 24 TPI blade. I use it for thin aluminum and it cuts through like butter.

Tim W
So Far, So Good! 11/05/2017 11:46:49 AM

So far, blade has cut everything I've thrown at it.

Brian R
Great product! 09/14/2017 12:26:33 PM

I bought these blades a month ago and I'm glad I did!!

Anonymous Reviewer
very good quality 06/01/2017 10:19:08 PM

Have not had time to use this blade but if anything like the other one it will be just fine