View Product
Animation for H8140
Your Cart ×
Estimated Total: Checkout Now
Add this complete 7 Gallon Tank System to any metal cutting machine for efficient cutting, reduced tool wear and better finishes. Includes pump, switch, enclosed tank, coolant return hose and flexible nozzle with magnetic base. Made in an ISO 9001 factory.


  • Pump motor: 1/16 HP, 110V
  • Maximum flow: 3.17 gallons per minute
  • Maximum capacity: 7 gallons

17 Customer Reviews (4.8 out of 5 stars) : Sign in to write a review

roger S
04/28/2020 8:30:40 PM

I'm using it on my drill press and have already saved several large bits.

Anonymous Reviewer
Works Great! 04/09/2020 5:03:35 PM

I bought this for my 12x36 lathe and it works great. Only thing I will say is that you may want to remove the screen on the bottom of the pump. I understand the reason for it, however it really restricts the coolant flow a lot. Once I removed that I have a very consistent coolant flow now without petering out.

donald K
02/22/2019 3:44:23 PM

I haven't hooked it up yet. It looks good and I'll let you know when I do.

10/18/2018 6:28:57 PM

No feedback given

Anonymous Reviewer
09/22/2018 5:31:01 AM

No feedback given

Keith J
Great product for the price. We have logged many hours on it since we purchased it with no issues 04/05/2018 12:10:13 PM

No feedback given

12/23/2017 1:10:56 AM

I hooked the coolant tank up to my mill, it does a good job and the price was not bad at all.

Robert H
Works 12/08/2017 11:32:11 AM

I got this for my 12x36 lathe and it works as advertised. The nozzle ball joint was separated from the base when I got it. The nozzle joints are actually made to do this, but you need the special pliers that come with plastic nozzle kits to put it back. I may upgrade the nozzle to one that mounts directly to the carriage (there is a hole in the back for it). But the magnetic base that comes with it works ok. The other alteration I might do is to relocate the on/off switch to the side of my lathe. It is attached directly to the tank,

john W
still waiting 11/09/2017 1:24:24 AM

waiting on mill i purchased at the same time and and yes the mill went on sale after i order it . do you think i will get the mill for the sale price :( !!!

Allen M
Works Great! 11/06/2017 10:22:41 PM

Everything works great! We use it on a G0705 mill/drill. The flow is more than enough for most applications - we actually keep it turned way down. The only "downside" is that I could not find any mention of the minimum capacity for the pump to work (it's around 2.5-3 gallons).

Anonymous Reviewer
Great Product 11/04/2017 12:50:37 PM

It fit the bottom platform of are drill press like it was made for. Very well built good piece of equipment.

Anonymous Reviewer
greate product, low price 07/17/2017 1:44:17 PM

this product arrived quickly and works great. I would recommend this to anyone.

Anonymous Reviewer
Works very well ! 06/24/2017 3:06:28 PM

No feedback given

Anonymous Reviewer
06/02/2017 6:43:23 AM

My mill and drill press both have built in coolant tanks in the base. these are both new and have not used coolant in them. The 7 gallon coolant tank required a base with wheels to be portable and some modifying of the return and feed lines with quick connect fittings. This setup also required sealing the existing built in tanks and removing the pumps to not allowing any coolant to enter them. I used the existing wiring for the pumps terminated to a plugin for the portable unit. I have used the unit now portable on both machines and I am very pleased with the flow and pressure.

Austin W
Great coolant tank 06/02/2017 1:04:44 AM

I'm using the coolant system on my G4003 lathe.

Tim A
04/27/2017 11:25:22 AM

Good price, good product. Took it apart and cleaned it but it was not really that dirty.

Anonymous Reviewer
01/27/2017 12:03:22 PM

Screen was rusty in the delivery pump and had to be cleaned before use. Tank had residue in corners and some on the bottom. The clear delivery tube was kinked in many places. Works great. Took time to get all this fixed for use.