View Product
Animation for G5160
Your Cart ×
Estimated Total: Checkout Now
  • Length: 93-1/2"
  • Width: 1/4"
  • Type: Carbon Tool Steel
  • TPI: 14 Raker
  • Gauge: 0.025"

We have many combinations of blade widths and pitch from the smooth cutting raker tooth to the efficient skip tooth and the aggressive hook tooth styles. Top quality saw steel manufactured to precise tolerances and guaranteed welds result in very smooth cutting blades. Blades are sized to fit Grizzly bandsaws as well as many other brands. Just match up the length in the charts with the recommended length for your bandsaw. If you need more information to help match blade cutting characteristics with your particular applications, just call our friendly service technicians.

Blade Selection: Selecting the right blade for the cutting task requires knowledge about blade characteristics and cutting priorities (i.e. speed, finish, etc.).

  • Blade Length: Measured by the blade circumference, blade lengths are specific to each bandsaw. They are determined by the wheel diameter and distance between the wheels.
  • Blade Width: Measured from the back of the blade to the tip of the blade tooth (the widest point). Blade width determines the largest and smallest curve that can be cut, and contributes to the accuracy of cutting straight—generally the wider the blade, the straighter it will cut.

Tooth Set: Two common tooth sets for wood bandsaw blades are alternate and raker. Each type of tooth set removes material in a different manner, leaving cuts with different characteristics.

  • Alternate: An all-purpose arrangement where the teeth are bent evenly left and right of the blade.
  • Raker: Three teeth in a recurring group—one bent left, one bent right, and one that is not bent. The raker set is ideal for most contour cuts.

Tooth Type: The most common tooth types for wood blades are:

  • Standard (or Raker): Equally spaced teeth set at a “0” rake angle. Recommended for thinner workpieces and general use.
  • Hook (or Claw): Wide gullets (round or flat), equally spaced teeth, positive rake angle, and fast cut with good surface finish.
  • Skip (or Skip Tooth): Wide, flat gullets, a "0" rake angle, equally spaced teeth, and recommended for thick wood cutting.

13 Customer Reviews (4.9 out of 5 stars) : Sign in to write a review

Desmond L
04/11/2019 6:30:59 PM

No feedback given

Anonymous Reviewer
02/17/2019 8:28:45 PM

No feedback given

Anonymous Reviewer
01/02/2019 1:29:08 PM

No feedback given

Rodney B
09/28/2018 1:02:25 AM

No feedback given

Anonymous Reviewer
I really like this band saw blade 07/19/2018 7:41:24 PM

I use one of these at the Happy Factory here in Cedar City

Anonymous Reviewer
Well worth the price 06/16/2018 2:08:13 PM

After extensive research, looked as though this would be best bang for buck. Have not had long enough to put through a lot of challenges but so far not disappointed. I think I have a winner. Will follow up after trying re-saw. If does well, then 6 stars.

Anonymous Reviewer
05/30/2018 3:27:28 PM

Top Quality. As usual, Grizzly comes through with a great product and service.

Al M
12/14/2017 6:25:42 PM

These band saw blades stay sharp and the price is right.

Anonymous Reviewer
These are very good quality blades. 09/15/2017 3:04:03 PM

I can turn some pretty sharp corners with this blade.

Anonymous Reviewer
06/02/2017 5:17:32 AM

I purchased this blade for general cutting chores and it has been very good at that. I cut a lot of Micarta, which is VERY tough on the teeth, and this band has been standing up really well. Also, it was easier to install and adjust on my Grizzly saw than some other bands I had been using. The tracking was very finicky on the others and the Grizzly bands run with almost no necessity for adjustment. Also run and cut smoother than the other junk.

Anonymous Reviewer
05/10/2017 12:54:52 PM

No feedback given

Anonymous Reviewer
Great product 01/26/2017 9:20:08 PM

Great blade, gives me small radius smooth cutting capapbility

Anonymous Reviewer
01/26/2017 6:37:45 AM

No feedback given