Your Cart ×
Estimated Total: Checkout Now
Item #: H3051
Model # H3051
Increase your G0555 or G0555X 14" Bandsaw's cutting capacity to 12" high with this bolt-on 6" extension block kit. Includes all necessary hardware plus extended blade guard and 3/8" x 105" x 6 TPI blade.

43 Customer Reviews (4.7 out of 5 stars) : Sign in to write a review

Mike S
Bolted right up to my Jet 14". 06/10/2019 3:46:21 PM

Bolted right up to my Jet 14". Now I have to repaint the reset of the saw to match the riser block! I was concerned about the pin spacing but it was not a problem. In my case the blade tracking was also still right on.

Anonymous Reviewer
Great product 06/06/2019 4:58:01 PM

This is exactly what my G0555 14 bandsaw needed. It took an already awesome bandsaw to the next level. Thank God for Grizzly tools. Hands down the best.

Anonymous Reviewer
Good value for the money. 05/24/2019 1:52:25 PM

Everything went together ok but it took a lot of shimming to get it all lined up straight & square.

Anonymous Reviewer
Works great 03/12/2019 4:11:25 PM

No feedback given

Anonymous Reviewer
perfect fit 02/24/2019 4:02:32 PM

Excellent fit, I needed it to start resawing some slaps, should have done this years ago. I now have a brand new saw. Saw has been excellent thru the years

Anonymous Reviewer
Great product 12/29/2018 10:16:59 PM

No feedback given

Anonymous Reviewer
Pretty easy to install 12/24/2018 12:25:58 PM

If you are comfortable with doing adjustments on your saw, this kit is pretty easy to install. The project took no more than a few hours which includes readjusting the bearings and saw blade tension.

Anonymous Reviewer
11/12/2018 2:16:10 PM

No feedback given

Anonymous Reviewer
07/01/2018 11:28:51 AM

No installation instructions were included. It works well now, but I called for technical support because the new blades would not fit. Instead of talking me through it, I was sent updated printed material. That just prolonged the installation.

Anonymous Reviewer
Ggreat product 06/04/2018 12:48:02 PM

I bought this to install on my Porter Cable bandsaw, took a little bit of work to make it work but works just fine, needed the extra height to resaw wider pieces of stock.

George D
05/13/2018 3:35:53 PM

Works well, resaw size is increased by 100%. Easy install, minimal effort

Anonymous Reviewer
04/28/2018 1:47:48 PM

No feedback given

Anonymous Reviewer
So far so good 04/12/2018 5:49:30 PM

I have not yet installed the riser block so I can only say that it arrived in good shape when promised. I will update review when installed

Fred M
04/05/2018 10:33:39 PM

Easy to install. Blade adjustment was a little tricky to figure out until I got the manual out. Lol. It all made sense then

Michael R
Very Satisfied 04/03/2018 7:00:54 PM

I am very happy with this riser block. It makes a difference in cutting taller pieces.

Anonymous Reviewer
It does the job 02/09/2018 4:06:08 PM

No feedback given

Anonymous Reviewer
Riser BLOCK KIT 02/04/2018 2:43:12 PM

Every part went to gather every easy and worked grate for a Ridged 14" bandsaw

Doug A
01/27/2018 12:05:10 PM

No feedback given

Anonymous Reviewer
Riser Block kit works great! 01/04/2018 1:06:29 AM

I installed the riser block kit and adjusted my G0555 in a couple hours. The video on youtube along with the written instructions made this an easy to follow procedure. I did have minor difficulty adjusting the blade tensioner, which doesn't seem to let you align the blade thickness marker quite correctly, but it works fine by adjusting be flutter. The extra cutting height is well worth the price of this kit.

Anonymous Reviewer
12/28/2017 9:08:09 PM

This worked out so well, easy to install and made a big difference!!

Anonymous Reviewer
12/27/2017 1:29:42 AM

No feedback given

Robert L
Works great with a Delta Bandsaw 12/20/2017 3:45:03 PM

I bought this kit as it was $150 cheaper than the one that I could find on Amazon for my Delta Bandsaw. As Delta no longer makes them, I had to be creative. I called customer service, and they were very helpful in measuring the rod on the back to be sure that it would fit in the guides for raising and lowering the blade guide.Almost all of the parts fit exactly, with the exception of the red safety guard and the riser block itself.The safety guard was easy to modify as I just took a pair of snips and cut a slot for an adjustment screw to fit through.The riser block was a little trickier as the pins in it did not align with the ones on my Delta saw. So I cut a piece of 2x4 and put it over the bottom, with the pins, and tapped it. That gave me a perfect drill guide to drill the base of my saw so it would fit with the pins. It took about 3 hours to install but now I have a 12" riser and can cut the deeper burls for my wood turning.

The only bad part is the blade they sent with the kit. It is pure junk.

Dave J
12/10/2017 1:08:49 PM

No feedback given

Randy M
12/01/2017 11:29:11 AM

No feedback given

Anonymous Reviewer
11/16/2017 2:39:08 PM

This is an excellent way to "get a bigger bandsaw" inexpensively. Adding six inches to my cutting ability gives me access to more and larger bowl blanks.

09/29/2017 10:26:19 AM

No feedback given

Frank W
Adds the extra height needed for resawing 09/01/2017 9:26:42 PM

Purchased the riser block for a "Polar" (white) version of the 555 bandsaw. It was easy to install, instructions were clear, and it took little time to set the saw up again (although I used a different blade, a Wood Slicer, than the one Grizzly sent). I now have the capability I needed for resawing bigger boards and should have done this long ago. Because this version is green, I spray painted it white. With the new blade it resaws every hardwood I have put on the saw (not going to try Ipe, though).

Diane C
Good Product 08/24/2017 11:43:40 AM

This is great that I now can resaw more than 6 inches. However, the blade guard that comes with it is flimsy and the top extended piece comes loose with vibration and rubs on the blade. Have to stop and fix. I did install the riser by myself, a little difficult alone but got it done. Recommend a second pair of hands.

Anonymous Reviewer
Parts all went together very easy and worked well . Thank you for the quick delivery to Canada. 07/24/2017 7:29:56 PM

No feedback given

Anonymous Reviewer
07/20/2017 6:50:19 PM

No feedback given

Daniel F
06/06/2017 12:45:21 PM

No feedback given

Mario N
Good product as usual 06/03/2017 8:16:31 PM

As expected. Service from Grizzly is impeccable...

Anonymous Reviewer
great product 06/02/2017 9:53:38 PM

On recommendation from a friend I bought this and found it easy to install. I'm very happy with it.

Anonymous Reviewer
06/02/2017 5:48:54 PM

mounted on a Central Machinery ''14 #32208. fits like a glove..

Anonymous Reviewer
06/02/2017 9:53:09 AM

Ive had this for a few months and love it. Very helpful and would definitely buy it again.

Lyle L
06/01/2017 10:40:38 PM

Easy to install and works great. The blade that came with it leaves some to desire.

Anonymous Reviewer
05/31/2017 11:23:57 AM

This expands the max height for my G0555. Works nicely. Easy install. Beautiful kit - well made.

Anonymous Reviewer
05/16/2017 12:16:34 AM

No feedback given

Tom F
Works Very Well 05/13/2017 11:26:05 PM

Exactly as advertised and as I expected and lets me get so much more out of my 14 inch Bandsaw. Only sorry I wanted so long to get it!

Anonymous Reviewer
Haven't Used 05/13/2017 1:46:57 PM

I bought this with the hopes of wanting to do more with a bandsaw once I got a quality bandsaw. I purchased the G0555...you can see my review on it...and am glad I went ahead an bout the riser block kit at the same time. I really like my G0555 and can see me installing the riser sometime this year. The projects I have now are small and I shy away from larger boards that need re-sawing. Now that i know how well my G0555 performs, I have no reservations with tackling thicker boards and re-sawing more lumber.

Steve S
Another excellent Grizzly product 01/26/2017 5:07:45 PM

I bought this kit to expand my re-sawing capability. I watched the on line installation video and it went just as expected.

Anonymous Reviewer
It's ok product 01/26/2017 4:32:30 AM

Its great for allowing more material to pass under the blade guide, however, I find that the band saw seems under power for the extra blade.

Anonymous Reviewer
01/26/2017 12:52:48 AM

The kit is great, but the instructions could be a little better. It is a great add-on for the band saw!