View Product
Animation for T1244
Your Cart ×
Estimated Total: Checkout Now
This router table wing fits as a replacement for or extension to most table saw wings and will create a feature-packed router work station within the footprint of your table saw - all while saving valuable shop space. The split fence is fully adjustable to allow for minimal gaps when using various sized bits, and three insert rings are included to compliment this purpose. Each side of the fence has a built in T-slot for attaching feather boards or other hold-down devices. When utilizing the included dust port your shop will stay cleaner and safer with all the benefits that a router table provides over free-hand routing. Drilling mounting holes may be required. Table Dimensions: 16"W x 27"D.

12 Customer Reviews (4.8 out of 5 stars) : Sign in to write a review

Anonymous Reviewer
Solid product 05/30/2020 1:41:06 PM

Overall, this is fine. It's nice to have router table capabilities without taking up precious space. One can expect to adapt it a bit to fit your saw and fence. It wasn't too hard, but it was necessary.

My only complaint is that one of the plate's leveling screws is VERY loose. The vibrations of the router cause the screw to move. Subsequently, the edge of the plate falls inside the table wing. That creates all sorts of issues with stock catching, uneven routing, etc.

Chris M
Great accessory for the table saw 03/28/2020 8:40:35 PM

I love the ability to have a router table connected to my table saw since I have a small workshop and would highly recommend it. I had to drill some holes and tap others into the cast iron so I use the wing that came with the table saw which worked out pretty good. That being said, I would also love to find a lift that would have the same plate size so I can drop into the wing, so hopefully one will be coming out soon!

Heavy table 02/14/2020 12:17:39 PM

Is exactly what I wanted. Mounted up to my grizzly cabinet say with ease. Fence went together quickly. Mounting my triton router on the plate was long and tedious but I finally was able to get it to fit correctly. Not really impressed with the fence. Difficult to square it up but learning as I go.

Anonymous Reviewer
02/10/2020 1:15:03 PM

I bought this router table extension wing to add to the right of the existing 10" table extension on my new G0771Z. It mounted perfectly and filled the remaining fence guide rail space. However, the saw became very tippy due to the extra weight. I ended up mounting it as instructed to the right so my table length is now 16" to the right instead of the original 10". Not wanting to give up on the original table extension I installed it to the left, so I have 20" to the left and 16" to the right. The table is rock solid now. At some point I may add legs and a roller base extension, but for now it works great. I added a switch to the working side for convenience.

Anonymous Reviewer
02/05/2020 2:52:30 PM

It didnt have the holes line up on my saw the way I needed. But it was simple enough to drill new ones. Overall I love this. It has saved a lot of space in my small garage shop. I havent decided if Ill add a Jessem or some other router lift to it. Might be a good add on for Grizzly to think about.

Anonymous Reviewer
Excellent, great product!!! 01/05/2020 3:31:09 AM

Fantastic addition to my G0833P.
Drilled a couple holes and bingo!!!
Highly Recommend!

Floyd G
Very Satisfied! 11/16/2019 3:54:29 PM

I added this to my Ridgid TS3650 which had the front and back rail extension with 'T' slot that made installation super easy. Everything lined up perfectly except for the bolt holes to secure it to the existing table - an easy thing to remedy. After getting it all lined up, it's like it was always made to be there and I like that I can use the fence that comes with the table or my existing table saw rip fence, or both.
The added weight on the right does make it a bit unstable when I'm moving it around so I plan to add a drop-down leg for additional support, especially when routing large or heavy pieces.
Definitely one of my best shop tool purchases!!

Anonymous Reviewer
11/13/2019 5:21:35 PM

No feedback given

Anonymous Reviewer
I had to modify it to fit my 715 08/25/2019 1:20:08 AM

No feedback given

Anonymous Reviewer
12/29/2018 3:12:47 PM

I attached this to my older Delta table saw. It fit perfect.

Anonymous Reviewer
12/28/2018 4:08:40 PM

No feedback given

Anonymous Reviewer
A nice addition 12/09/2018 4:11:10 PM

This affordable add-on to my Grizzly table saw serves two purposes. It expanded my table width which gives my greater support for panels and then made my table saw a multi-tool to do precision routing with handy dust and chip removal. The cast iron construction is much appreciated.

Q & A

Common Questions and Answers about the T1244:

Q: Is the extension cast iron?

A:Yes, this item is made out of cast iron.