Grizzly G8809 - 108" x 1/4" x .025" x 14 TPI Raker Bandsaw Blade
SuperCut Bimetal Bandsaw Blades are a superior blade with high alloy, high speed M2 teeth and a spring steel back to provide flexibility and toughness in the blade. Bimetal blades are welded by an electron beam under high vacuum to attach the strip of high speed M2 teeth to the spring steel back. The teeth are then ground into the M2 steel. Bimetal blades are primarily used for steel cutting, but also can be used for cutting non-ferrous materials and wood. Bimetal blades will give lower cost per cut on tough sawing jobs.
- Length: 108"
- Width: 1/4"
- Type: Bi-metal
- TPI: 10 - 14 VP
- Gauge: 0.25"
Blade Selection: Selecting the right blade for the cutting task requires knowledge about blade characteristics and cutting priorities (i.e. speed, finish, etc.).
Tooth Set: Two common tooth sets for wood bandsaw blades are alternate and raker. Each type of tooth set removes material in a different manner, leaving cuts with different characteristics.
Tooth Type: The most common tooth types for wood blades are: