Grizzly H0925 - Insta-Cure+, 1/2 oz.
H0925 Insta-Cure+, 1/2 oz.
This gap-filling cyanoacrylate is tough to beat.
Insta-Cure+ is a higher viscosity CA (super glue) for loose fitting joints in which the adhesive must bridge gaps.
The H0925 Insta-Cure+ is a powerful CA or Cyanoacrylate in a one-half ounce bottle.
Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds.
For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used.
To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
WORKS BEST ON:
- Balsa wood
- Soft wood
WORKS WELL ON:
- Hard wood
- Hard Plastics
- Full strength is reached in three hours
- Refrigerate to extend shelf life