Item# W1757 Model# W1757

Shop Fox W1757 - 43" 25 HP 3-Phase Double Head Wide-Belt Sander

W1757 43" 25 HP 3-Phase Double Head Wide-Belt Sander

Double the heads, triple the benefits for production shops!

With the W1757 43" 25 HP 3-Phase Double Head Wide-Belt Sander, you can take advantage of three types of sanders in one.

It has the feathering benefits of a platen-type sander, the surfacing benefits of a drum-type sander, and the surface removal and time-saving benefits of a dual-grit double-drum sander.

The first belt runs on a single drum and the rear belt runs on a platen system which allows you to adjust the sanding depth. The sanding belts are 43" wide by 60" long. For a full range of replacement belts for the W1757, shop here.

The digital amperage draw meter is used to keep the machine from being overloaded during sanding operations.

When pushed, the emergency stop plate, stops the electricity to the motors and also applies an air-disc brake to stop the sander immediately.

The W1757 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.

The W1757 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.

The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts for the sander may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.

Made in an ISO 9001 Factory

CSA and UL certified

SPECIFICATIONS:

  • Sanding motor: 25 HP, TEFC, 220V/440V*, 3-phase, 60A/30A
  • Conveyor motor: 2 HP, TEFC 6A/3A
  • Table lift motor: 1/4 HP, TEFC, 1.2A/0.6A
  • Maximum board width: 43"
  • Maximum board thickness: 6"
  • Minimum board length: 14"
  • Minimum board thickness: 1/4"
  • Feed rate: Variable, 14–60 FPM
  • Sanding belt size: 43" x 60"
  • Drum speed: 3543 FPM front, 2565 FPM rear
  • Air requirements: 75 PSI
  • Footprint: 61" x 31-1/2"
  • Overall size: 63-1/2" W x 60-1/2" D x 66-1/2" H
  • Approximate shipping weight: 3364 lbs.

FEATURES:

  • Two-year warranty!!
  • Variable feed speeds
  • Independent motor control
  • Disc brake for emergency stop
  • Hard rubber infeed drum, adjustable platen on rear drums
  • Digital readout table control accurate to within 0.005"
  • Digital readout sanding load meter
  • Rubber pressure rollers
  • Ten 4" dust ports

Due to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.

*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Woodstock Technical Support at 360-734-3482 before placing your order.

View More Details

Accessories

Recommended For You

Overview

W1757 43" 25 HP 3-Phase Double Head Wide-Belt Sander

Double the heads, triple the benefits for production shops!

With the W1757 43" 25 HP 3-Phase Double Head Wide-Belt Sander, you can take advantage of three types of sanders in one.

It has the feathering benefits of a platen-type sander, the surfacing benefits of a drum-type sander, and the surface removal and time-saving benefits of a dual-grit double-drum sander.

The first belt runs on a single drum and the rear belt runs on a platen system which allows you to adjust the sanding depth. The sanding belts are 43" wide by 60" long. For a full range of replacement belts for the W1757, shop here.

The digital amperage draw meter is used to keep the machine from being overloaded during sanding operations.

When pushed, the emergency stop plate, stops the electricity to the motors and also applies an air-disc brake to stop the sander immediately.

The W1757 comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.

The W1757 manual was written by our U.S. based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.

The Woodstock Customer Service and Technical Support Teams are U.S. based. Parts for the sander may be available online and shipped from the Woodstock parts warehouse in Springfield, MO.

Made in an ISO 9001 Factory

CSA and UL certified

SPECIFICATIONS:

  • Sanding motor: 25 HP, TEFC, 220V/440V*, 3-phase, 60A/30A
  • Conveyor motor: 2 HP, TEFC 6A/3A
  • Table lift motor: 1/4 HP, TEFC, 1.2A/0.6A
  • Maximum board width: 43"
  • Maximum board thickness: 6"
  • Minimum board length: 14"
  • Minimum board thickness: 1/4"
  • Feed rate: Variable, 14–60 FPM
  • Sanding belt size: 43" x 60"
  • Drum speed: 3543 FPM front, 2565 FPM rear
  • Air requirements: 75 PSI
  • Footprint: 61" x 31-1/2"
  • Overall size: 63-1/2" W x 60-1/2" D x 66-1/2" H
  • Approximate shipping weight: 3364 lbs.

FEATURES:

  • Two-year warranty!!
  • Variable feed speeds
  • Independent motor control
  • Disc brake for emergency stop
  • Hard rubber infeed drum, adjustable platen on rear drums
  • Digital readout table control accurate to within 0.005"
  • Digital readout sanding load meter
  • Rubber pressure rollers
  • Ten 4" dust ports

Due to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.

*This machine is prewired for 220V. We can rewire to 440V in a few days’ time for a fee of $250. Please contact Woodstock Technical Support at 360-734-3482 before placing your order.

Reviews