Item# SB1015F Model# SB1015F

South Bend SB1015F - 16" x 60" Electronic Variable-Speed 440V Toolroom Lathe with Fagor DRO

16" x 60" Electronic Variable-Speed 440V Toolroom Lathe with Fagor DRO-img-0
16" x 60" Electronic Variable-Speed 440V Toolroom Lathe with Fagor DRO-img-1
$24,250.00
+$2,200.00 Freight
+$0.00  Oversize
  • Motor: 7.5 HP 3-Phase
  • Swing: 16"
  • Distance between centers: 60"
  • Spindle bore: 2.0625"
  • Spindle type: D1-6 Camlock
  • Speeds: 20 – 2500 RPM
  • Tailstock taper: MT#4
  • Tailstock barrel travel: 6"
  • Shipping weight: 3488 lbs.

Hover to View Details

Add to Cart
Available to Ship

Recommended For You

Overview

SB1015F 16" x 60" Electronic Variable-Speed 440V Toolroom Lathe with Fagor DRO

Like all South Bend lathes, it comes with a 2-year warranty which covers parts and assures the unit is free from factory defects.

The South Bend Customer Service and Technical Support Teams are U.S. based. Parts and accessories for the lathe are available on-line and shipped from the South Bend parts warehouse in Springfield, MO.

Features:

  • Two headstock gear speed ranges supply high torque in low range from 20 to 400 RPM and constant power from 400 to 2500 RPM in high range
  • Precision hardened and ground headstock gears run in an oil bath for super smooth, quiet and vibration free operation.
  • D1-6 camlock spindle has large 2-1/16" hole through spindle
  • The heavy-duty bed incorporates South Bend Lathe's signature 3 V-way and 1 flat way design, which assures precision alignment of the headstock, tailstock and saddle
  • The ways are induction hardened and precision ground to perfection
  • Meehanite bed castings
  • Two T-slots are machined into the rear of the cross slide for mounting tooling or fixtures
  • Removable chip tray for ease of clean-up
  • One shot lubrication in carriage
  • 6" Tailstock barrel travel
  • Variable speed controlled by simple dial
  • Digital spindle speed indicator
  • Yaskawa frequency drive
  • Tailstock with inch/metric graduated quill and tang knock-out slot
  • Centralized lubrication pump for bed-ways and cross slide
  • Quick action full length emergency foot brake
  • Dual-reading inch/metric dials on the cross feed and compound
  • Full length, rear mounted splash guard
  • Lockable main disconnect switch
  • Fagor DRO

Specifications:

  • Swing over bed: 16.14"
  • Distance between centers: 60"
  • Swing over cross slide: 10.375"
  • Swing over gap: 22.95"
  • Spindle nose to gap (max.): 10.2"
  • Cross slide travel: 9.25"
  • Compound slide travel: 5.1"
  • Spindle nose: D1-6 Camlock
  • Spindle bore: 2.0625"
  • Taper inside spindle: MT#6
  • Spindle speed: Variable from 20 to 2500 RPM
  • RPM ranges: 20 to 400, 400 to 2500
  • Inch threads: (45) 2 to 72 TPI
  • Metric threads: (39) 0.2 to 14mm
  • Modular threads: (18) 0.3 to 3.5
  • Diametral threads: (21) 8 to 44
  • Longitudinal feed: 0.002 to 0.067 IPR
  • Cross feed: 0.001 to 0.034 IPR
  • Number of feed selections: 17
  • Tailstock barrel diameter: 2.047"
  • Tailstock quill travel: 6"
  • Tailstock taper: MT#4
  • Spindle motor: 7.5 HP
  • Voltage: 440V, 3-phase
  • Coolant motor: 1/8 HP
  • Footprint: 19-1/2" x 101-7/8"
  • Approximate shipping weight: 3488 lbs.

Standard Equipment:

  • 9" 3-Jaw scroll chuck
  • 10" 4-Jaw independent chuck
  • 12" faceplate
  • Steady rest
  • Follow rest
  • 4 way tool post
  • Halogen lamp
  • Complete coolant system
  • Turret micrometer stop
  • Two Morse taper dead centers
  • Single saddle stop
  • Thread dial indicator
  • Leveling bolts
  • USA written parts/instruction manual
  • Tool box & tool kit
Reviews