Supercut G1995 - 111" x 5/8" x .025" x 3 TPI Hook Carbide-Embedded Bandsaw Blade
G1995 111" x 5/8" x .025" x 3 TPI Hook Carbide-Embedded Bandsaw Blade
A premium 111" carbide hook blade for ripping boards to size.
These steel blades have carbide teeth which will cut faster and stay sharp the longest of all the blades available. The razor-sharp teeth have been precision-ground and the carbide tips are brazed into the pockets. The carbide tip is stronger and can resist more heat than non-carbide blades.
Width is an important factor when considering a new blade. The typical range is as small as 1/8" wide to 3/4" wide. This 5/8" wide blade is good for contour sawing with a minimum radius of 4". For resaw cutting, you will want to fit the widest blade available for your machine.
Typically, there are more teeth per inch for narrower blades compared to wider blades. We sell hook blades in 3, 4, and 6 TPI versions. This means the 3 TPI cut slower than both the 3 TPI and 6 TPI blades.
The flex back blade helps with absorbing the stresses of cutting curves. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The 111" length blade fits a wide variety of bandsaws from 14" to 16". Choosing the correct blade for your bandsaw can seem like a helpless task. Using the incorrect blade can dramatically affect your bandsaw’s operation. With this explanation, the factors you would select the G5218 111" x 1/8" x .025" x 14 TPI Raker Bandsaw Blade should make total sense for your needs.
Here is a useful bandsaw blade chart to help visualize general blade configurations and capabilities.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
- Length: 111"
- Width: 5/8"
- Gauge: 0.025"
- TPI: 3 Hook
- Type: Carbide-embedded
- Grizzly 16" G1538
- Craftsman 15" 22440
- Craftsman 15" 24393
- Sears Professional 15" 22440
- General International 15" 690-1
- Lobo 16" 0163
- Reliant 16"
- Rikon 14" Deluxe 10-325
For other 111" blades, click here.