T24529 Mortise and Tenon Jig

This trailblazing tool provides a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig.

Designed in-house by General Tool's engineering team, the T24529 Mortise and Tenon Jig is ready to use right out-of-the-box to produce 1/4" mortise and tenon joints for cabinets, furniture and frames.

Included are the bushings for also producing 3/8" and 1/2" joints.

Using a plunge router with the jig, woodworkers can cut fully aligned mortises and tenons ranging from 1/4" to 1/2" wide and from 1 to 3" long.

The unit can be mounted directly on a workbench or onto a board that can be clamped in a vise or to a bench.

The Mortise & Tenon Joint has been used for thousands of years.

But not until now did someone figure out a way to provide a quick and easy, all-in-one solution to cut both a matching mortise and tenon with a single inexpensive jig.

The General EZ Pro Mortise & Tenon Jig is the answer!

The jig comes completely assembled and is ready to use right out-of-the-box to produce the widely used 1/4" mortise and tenon joint.

Using a plunge router with the jig, woodworkers can quickly and easily cut both mortises and tenons ranging from 1/4" to 1/2" thick and from 1" to 3" wide.

The unit can easily handle stock ranging from 1/2" to 1-1/2" thick and can cut multiple mortises in a single long piece.