T34034 5-pack of 3" x 79" Silicon Carbide Sanding Belts–600-Grit
600-grit replacement sanding belts for your knife grinder.
Made with premium Silicon Carbide abrasive grains, the T34034 600-Grit 3" x 79" Sanding Belts are a great choice for grinding, shaping, and maintaining sharp metal edges.
Silicon Carbide abrasive is known for its exceptional ability to produce smooth and consistent results in polishing, grinding, and intricate detail work. It's also commonly used for sanding non-ferrous metals, plastics, and composites due to its heat resistance and low clogging tendency.
600-grit paper is an extremely fine abrasive that excels in achieving a near-mirror finish on surfaces. This grit level is highly effective at removing any remaining imperfections, micro-scratches, and fine marks from previous sanding stages, resulting in a polished and flawless surface ideal for detailed and high-end finishing work.
It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.
The 3" x 79" size is ideal for use on knife grinders–especially on the Grizzly G0489, G0952, and the G0972.
The X-weight offers a superior balance of strength and flexibility, making it a versatile choice for various sanding tasks.
This allows you to achieve excellent results in stock removal and finishing, while keeping costs down.
These belts can be run in either direction and are flexible for easy contouring and shaping of your knife edges.
The Grizzly Customer Service and Technical Support Teams are U.S.-based.
Additional sanding belts are available both online and in store and are shipped from both Grizzly warehouses in Springfield, MO and Bellingham, WA.
Made in the USA
SPECIFICATIONS:
- Grit: 600
- Size: 3" x 79"
- Quantity: 5
- Paper weight: X
- Abrasive grain: Silicon carbide
FEATURES:
- Full resin bond
- Bump free tape seam
- Runs in either direction
FITS:
Accessories
T34034 5-pack of 3" x 79" Silicon Carbide Sanding Belts–600-Grit
600-grit replacement sanding belts for your knife grinder.
Made with premium Silicon Carbide abrasive grains, the T34034 600-Grit 3" x 79" Sanding Belts are a great choice for grinding, shaping, and maintaining sharp metal edges.
Silicon Carbide abrasive is known for its exceptional ability to produce smooth and consistent results in polishing, grinding, and intricate detail work. It's also commonly used for sanding non-ferrous metals, plastics, and composites due to its heat resistance and low clogging tendency.
600-grit paper is an extremely fine abrasive that excels in achieving a near-mirror finish on surfaces. This grit level is highly effective at removing any remaining imperfections, micro-scratches, and fine marks from previous sanding stages, resulting in a polished and flawless surface ideal for detailed and high-end finishing work.
It is important to sequence your sanding from a lower number to a higher number without bypassing more than one grit. Doing so may not remove the marks from the rougher grit.
The 3" x 79" size is ideal for use on knife grinders–especially on the Grizzly G0489, G0952, and the G0972.
The X-weight offers a superior balance of strength and flexibility, making it a versatile choice for various sanding tasks.
This allows you to achieve excellent results in stock removal and finishing, while keeping costs down.
These belts can be run in either direction and are flexible for easy contouring and shaping of your knife edges.
The Grizzly Customer Service and Technical Support Teams are U.S.-based.
Additional sanding belts are available both online and in store and are shipped from both Grizzly warehouses in Springfield, MO and Bellingham, WA.
Made in the USA
SPECIFICATIONS:
- Grit: 600
- Size: 3" x 79"
- Quantity: 5
- Paper weight: X
- Abrasive grain: Silicon carbide
FEATURES:
- Full resin bond
- Bump free tape seam
- Runs in either direction
