T33249 Kreg Deck Jig
A jig to help create a better, more beautiful deck.
The T33249 Kreg Deck Jig is a concealed-fastening system to allow you to install decking without visible fasteners. It is as easy as drill, drive, done.
The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes. This allows Kreg Deck Screws to attach decking from the edge solidly and invisibly—whether you’re using solid-wood or composite deck boards.
There are three hardened-steel guides — one at 90° to the board edge and two at opposing 45° angles. They allow easy access when working near walls and where boards butt together end to end.
The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw. It’s equipped with a stop collar to ensure that the screw gets driven to the perfect depth.
After drilling, just drop a self-tapping, case-hardened Kreg Deck Screw into the same guide and drive it with the included square-drive driver bit. The aggressive threads bite securely into the joist while the smooth upper shank and flat-bottom head work together to pull the deck board tightly into place.
The Deck Jig Concealed-Fastener System works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated wood — kiln-dried after treatment (KDAT) recommended.
Contact Kreg regarding warranties on their products and technical support.
FEATURES:
- Installs concealed deck fasteners
- Three hardened-steel drill guides for perfect hole angle and depth
- Angled drill guides for hard-to-reach areas
- Easy-to-grip handle for the ultimate in control
- Impact-resistant polymer and hardened steel construction
- Spacer rings ensure consistent, even spacing
- Works on solid wood or composite decking
INCLUDES:
- (1) Deck Jig
- (1) Deck Jig Drill Bit
- (1) Deck Jig Driver Bit
- (2) Stop Collars
- (1) Hex Wrench
- (3) 1/4" Spacer Rings
- (1) Owner's Manual
T33249 Kreg Deck Jig
A jig to help create a better, more beautiful deck.
The T33249 Kreg Deck Jig is a concealed-fastening system to allow you to install decking without visible fasteners. It is as easy as drill, drive, done.
The Deck Jig features hardened-steel guides to drill precisely positioned pilot holes. This allows Kreg Deck Screws to attach decking from the edge solidly and invisibly—whether you’re using solid-wood or composite deck boards.
There are three hardened-steel guides — one at 90° to the board edge and two at opposing 45° angles. They allow easy access when working near walls and where boards butt together end to end.
The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw. It’s equipped with a stop collar to ensure that the screw gets driven to the perfect depth.
After drilling, just drop a self-tapping, case-hardened Kreg Deck Screw into the same guide and drive it with the included square-drive driver bit. The aggressive threads bite securely into the joist while the smooth upper shank and flat-bottom head work together to pull the deck board tightly into place.
The Deck Jig Concealed-Fastener System works with composite decking, as well as solid-wood decking such as cedar, hardwoods, and pressure-treated wood — kiln-dried after treatment (KDAT) recommended.
Contact Kreg regarding warranties on their products and technical support.
FEATURES:
- Installs concealed deck fasteners
- Three hardened-steel drill guides for perfect hole angle and depth
- Angled drill guides for hard-to-reach areas
- Easy-to-grip handle for the ultimate in control
- Impact-resistant polymer and hardened steel construction
- Spacer rings ensure consistent, even spacing
- Works on solid wood or composite decking
INCLUDES:
- (1) Deck Jig
- (1) Deck Jig Drill Bit
- (1) Deck Jig Driver Bit
- (2) Stop Collars
- (1) Hex Wrench
- (3) 1/4" Spacer Rings
- (1) Owner's Manual
