T33346 Kreg Pocket-Hole Jig XL
Create pocket holes with twice the holding strength using the Kreg Pocket-Hole Jig XL.
Combined with the strength of XL Pocket-Hole Screws, which are specially engineered with extra holding power, the Pocket-Hole Jig XL is perfect for building big.
This extra-large jig makes it easy to use 2x4 or 4x4 boards. There are two preset material thickness setting at 1-1/2" and 3-1/2" respectively.
The Pocket-Hole Jigs XL features hardened-steel drill guides that position the stepped XL drill bit at the perfect angle for extra-large pocket holes.
The two drill guides position a pair of pocket holes at ideal spacing on the width of a 2x4 or 4x4 – but spacing can be adjusted by twisting the two drill guides apart to use them separately.
The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw. It’s equipped with a stop collar to ensure that the screw gets driven to the perfect depth.
After drilling, just drop a self-tapping, case-hardened Kreg Deck Screw into the same guide and drive it with the included square-drive driver bit. The aggressive threads bite securely into the lumber while the smooth upper shank and flat-bottom head work together to pull it all tightly together.
The GripMaxx material on the underside of the jig helps it stay put while you drill.
The jig includes a universal clamp pad adapter to secure your jig with clamps.
Contact Kreg regarding warranties on their products and technical support.
FEATURES:
- Impact-resistant polymer and hardened steel construction
- Adjusts easily to material size
- Twist-apart dual drill guides
- Clamps securely during use
- Simple drill bit setup
- Large chip ejection ports
- Universal clamp pad adapter
- Works with Kreg XL Screws
INCLUDES:
- Pocket-Hole Jig XL
- 1/2" XL stepped drill bit
- 6" #3 XL square driver bit
- Easy-set stop collar
- Hex wrench
T33346 Kreg Pocket-Hole Jig XL
Create pocket holes with twice the holding strength using the Kreg Pocket-Hole Jig XL.
Combined with the strength of XL Pocket-Hole Screws, which are specially engineered with extra holding power, the Pocket-Hole Jig XL is perfect for building big.
This extra-large jig makes it easy to use 2x4 or 4x4 boards. There are two preset material thickness setting at 1-1/2" and 3-1/2" respectively.
The Pocket-Hole Jigs XL features hardened-steel drill guides that position the stepped XL drill bit at the perfect angle for extra-large pocket holes.
The two drill guides position a pair of pocket holes at ideal spacing on the width of a 2x4 or 4x4 – but spacing can be adjusted by twisting the two drill guides apart to use them separately.
The stepped drill bit creates a perfectly positioned pocket hole and clearance hole for the Kreg Deck Screw. It’s equipped with a stop collar to ensure that the screw gets driven to the perfect depth.
After drilling, just drop a self-tapping, case-hardened Kreg Deck Screw into the same guide and drive it with the included square-drive driver bit. The aggressive threads bite securely into the lumber while the smooth upper shank and flat-bottom head work together to pull it all tightly together.
The GripMaxx material on the underside of the jig helps it stay put while you drill.
The jig includes a universal clamp pad adapter to secure your jig with clamps.
Contact Kreg regarding warranties on their products and technical support.
FEATURES:
- Impact-resistant polymer and hardened steel construction
- Adjusts easily to material size
- Twist-apart dual drill guides
- Clamps securely during use
- Simple drill bit setup
- Large chip ejection ports
- Universal clamp pad adapter
- Works with Kreg XL Screws
INCLUDES:
- Pocket-Hole Jig XL
- 1/2" XL stepped drill bit
- 6" #3 XL square driver bit
- Easy-set stop collar
- Hex wrench
