Item: T27737 | Model: T27737
Pricing Information
$12.95
Price: $12.95
T27737 70-1/2" x 1/4" x .025" x 6 TPI Hook Bandsaw Blade
An economical 70-1/2" carbon steel raker blade for smooth cutting.
Hooked blades are most common for long cuts in thicker workpieces. The hooked tooth geometry is aggressive with the hook angled down towards the surface of the workpiece. This helps increase the feed rate through the material, but leaves tearout on the bottom of the workpiece.
Width is an important factor when considering a new blade. The typical range is as small as 1/8" wide to 3/4" wide. This 1/4" wide blade is good for contour sawing with a minimum radius of 5/8". For resaw cutting, you will want to fit the widest blade available for your machine.
Typically, there are more teeth per inch for narrower blades compared to wider blades. We sell hook blades in 3, 4, and 6 TPI versions. This means the 6 TPI cut more slowly than a 3 TPI or 4 TPI blade.
The flex back blade helps with absorbing the stresses of cutting curves. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The 70-1/2" length blade fits 10" bandsaws. Choosing the correct blade for your 10" bandsaw can seem like a helpless task. Using the incorrect blade can dramatically affect your bandsaw’s operation. With this explanation, the factors you would select the T27737 70-1/2" x 1/4" x .025" x 6 TPI Raker Bandsaw Blade should make total sense for your needs.
Here is a useful bandsaw blade chart to help visualize general blade configurations and capabilities.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
SPECIFICATIONS:
- Length: 70-1/2"
- Width: 1/4"
- Gauge: 0.025"
- TPI: 6 Hook
- Type: Carbon tool steel
FITS:
- Atlas 9360 Workshop 10"
- Atlas 912
- Craftsman 10"
- Rikon 10" 10-305
For other 105" blades, click here.
Actions for Products including purchasing, availability and wishlist
Shipping
Delivery Options Loading...
Accessories and Related Products
Product detail tabs
Overview
Hooked blades are most common for long cuts in thicker workpieces. The hooked tooth geometry is aggressive with the hook angled down towards the surface of the workpiece. This helps increase the feed rate through the material, but leaves tearout on the bottom of the workpiece.
Width is an important factor when considering a new blade. The typical range is as small as 1/8" wide to 3/4" wide. This 1/4" wide blade is good for contour sawing with a minimum radius of 5/8". For resaw cutting, you will want to fit the widest blade available for your machine.
Typically, there are more teeth per inch for narrower blades compared to wider blades. We sell hook blades in 3, 4, and 6 TPI versions. This means the 6 TPI cut more slowly than a 3 TPI or 4 TPI blade.
The flex back blade helps with absorbing the stresses of cutting curves. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The 70-1/2" length blade fits 10" bandsaws. Choosing the correct blade for your 10" bandsaw can seem like a helpless task. Using the incorrect blade can dramatically affect your bandsaw’s operation. With this explanation, the factors you would select the T27737 70-1/2" x 1/4" x .025" x 6 TPI Raker Bandsaw Blade should make total sense for your needs.
Here is a useful bandsaw blade chart to help visualize general blade configurations and capabilities.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
For other 105" blades, click here.
T27737 70-1/2" x 1/4" x .025" x 6 TPI Hook Bandsaw Blade
An economical 70-1/2" carbon steel raker blade for smooth cutting.
Hooked blades are most common for long cuts in thicker workpieces. The hooked tooth geometry is aggressive with the hook angled down towards the surface of the workpiece. This helps increase the feed rate through the material, but leaves tearout on the bottom of the workpiece.
Width is an important factor when considering a new blade. The typical range is as small as 1/8" wide to 3/4" wide. This 1/4" wide blade is good for contour sawing with a minimum radius of 5/8". For resaw cutting, you will want to fit the widest blade available for your machine.
Typically, there are more teeth per inch for narrower blades compared to wider blades. We sell hook blades in 3, 4, and 6 TPI versions. This means the 6 TPI cut more slowly than a 3 TPI or 4 TPI blade.
The flex back blade helps with absorbing the stresses of cutting curves. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The 70-1/2" length blade fits 10" bandsaws. Choosing the correct blade for your 10" bandsaw can seem like a helpless task. Using the incorrect blade can dramatically affect your bandsaw’s operation. With this explanation, the factors you would select the T27737 70-1/2" x 1/4" x .025" x 6 TPI Raker Bandsaw Blade should make total sense for your needs.
Here is a useful bandsaw blade chart to help visualize general blade configurations and capabilities.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
SPECIFICATIONS:
- Length: 70-1/2"
- Width: 1/4"
- Gauge: 0.025"
- TPI: 6 Hook
- Type: Carbon tool steel
FITS:
- Atlas 9360 Workshop 10"
- Atlas 912
- Craftsman 10"
- Rikon 10" 10-305
For other 105" blades, click here.