Supercut G4133 - 80" x 3/16" x .025" x 4 TPI Skip Bandsaw Blade
G4133 80" x 3/16" x .025" x 4 TPI Skip Bandsaw Blade
An economical 80" carbon steel skip blade for general cutting with all-round performance.
Skip blades have regularly spaced teeth at 0° rake angle with wide, flat gullets. This configuration leaves a clean cut and helps prevent clogging when cutting soft wood, non-ferrous metals, and plastics.
We sell skip blades in 4 TPI versions. The more teeth per inch on the blade, the smoother the cut will be.
These blades have the same shape as raker blades, but without over other tooth comparatively. This makes for a faster and more aggressive cut, but is not as clean.
Width is an important factor when considering a new blade. The typical range is as small as 1/8" wide to 3/4" wide. The skip blades we sell are 3/16" wide blade is great for contour sawing with a minimum radius of 5/16".
The flex back blade helps with absorbing the stresses of contour sawing. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The 80" length blade fits 12" bandsaws. Choosing the correct blade for your 12" bandsaw can seem like a helpless task. Using the incorrect blade can dramatically affect your bandsaw’s operation. With this explanation, the factors you would select the G4133 80" x 3/16" x .025" x 4 TPI Skip Bandsaw Blade should make total sense for your needs.
Here is a useful bandsaw blade chart to help visualize general blade configurations and capabilities.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
- Length: 80"
- Width: 3/16"
- Gauge: 0.025"
- TPI: 4 Skip
- Type: Carbon tool steel
- Atlas 12"
- Craftsman 12" 9HT2433N
- Craftsman 12" 9HT233IN
- Craftsman 12" 22432 1HP
- Craftsman 12" pre-1991
- Hitachi 12"
For other 80" blades, click here.