×
Your Cart ×
Estimated Total: Checkout Now
Item #: D4151
Model # D4151
Overview
This dual voltage, single-phase Paddle Switch is rated for 120 volt, 2 HP motors up to 35 amps and 230 volt, 3 HP motors up to 20 amps. The large paddle makes this switch ideal for emergency shut offs. Fits basic electrical boxes.
Reviews

40 Customer Reviews (4.8 out of 5 stars) : Sign in to write a review

Anonymous Reviewer
05/26/2019 3:38:44 AM

Recently purchased to replace safety switch on Delta Tablesaw. Used 2 gang box with 1 gang cover, and attached to existing support. Impressed with operation, it is easy to switch off with knee. Great buy.

Cliff B
Nice Switch 02/04/2019 1:30:39 PM

Nice Switch. Replacement for many machines or can be adapted to your machine.

Anonymous Reviewer
02/03/2019 9:00:34 PM

No feedback given

Anonymous Reviewer
Solid and sure! 01/30/2019 5:23:38 PM

Much Better than I hoped for. Easy to install.

Anonymous Reviewer
works exactly as the original 12/27/2018 8:50:18 PM

Replaced the original switch perfectly. A bit difficult to reconnect the wires due to their length in the box, but certainly do-able. I'd recommend this product.

Anonymous Reviewer
10/26/2018 11:43:41 AM

No feedback given

Anonymous Reviewer
10/25/2018 12:58:15 PM

I bought this item several weeks ago and I am pleased with the switch although if standard crimp terminal ends are used it is a very tight fit for any standard outlet box. I recommend soldered right angle ends.

Anonymous Reviewer
Work great 10/19/2018 5:19:37 PM

I replaced a old switch. This one is a lot better very happy with it

Anonymous Reviewer
Safer than OEM switch replacement. 09/29/2018 12:30:50 AM

Ive been a Grizzly customer since I upgraded my shop in 1986. Have had great luck with all eight Grizzly stationary tools. In over 30 years only two parts issues both handled hassle free and at no cost. Switch worked fine , bought three plan to upgrade other machines with this much safer switch.

Anonymous Reviewer
07/22/2018 12:21:31 PM

Wanted the safety and convenience of a paddle switch. The D4151 was priced right, with adequate ratings, and installed easily. Shown here installed on my G1022Z.

Anonymous Reviewer
Great as t product and tech support, as always! 07/11/2018 2:54:53 PM

No feedback given

Ian N
Great replacement! 06/18/2018 3:32:39 PM

Works great and as it should on my Craftsman/Steel City Table saw. Easy install and it arrived quickly!

Anonymous Reviewer
06/16/2018 6:09:50 PM

No feedback given

GORDENLUND
04/12/2018 1:48:08 PM

Ok . These switches work ok but with continual don t last long

Gary W
Nice safety feature on my Jet lathe 04/07/2018 3:43:00 PM

No feedback given

Anonymous Reviewer
03/30/2018 7:34:29 PM

No feedback given

Anonymous Reviewer
03/19/2018 4:16:54 AM

Good service. Time line OK. Packing OK. Price over average.

Anonymous Reviewer
03/17/2018 9:46:50 PM

No feedback given

Jonathan W
Great switch! 02/05/2018 11:52:19 AM

I installed this switch on my old Rockwell table saw. Switch works great. I did have to make a few relief cuts in my box reducer plate to make the switch fit into a single gang opening but once that was done it works just fine.

Anonymous Reviewer
Replacement Switch 01/22/2018 11:59:49 PM

This is the second replacement switch that I've had to install on my G0715P Table Saw. It functions as it should and was easy to install, but it remains to be seen if it will last longer than the two previous switches.

Anonymous Reviewer
I like the product, however I purchased the same two years prior and its life was short. 01/19/2018 1:54:53 PM

No feedback given

Anonymous Reviewer
Good switch and good description by Grizzly 01/08/2018 2:39:11 PM

Replaced switch on a Scheppach table saw that we had a tough time finding service parts for. Was a direct replacement, easy to install. Glad Grizzly had such good pictures of the actual switch mechanism inside the housing so we were able to confirm it was exact replacement. Will definitely work with Grizzly again.

Mark
Great product! 12/26/2017 4:39:20 PM

I bought this switch to upgrade my 25 year old Grizzly table saw. The saw is stil working perfectly, I just wore out the switch. This new switch is also a safety upgrade with the large stop paddle.

melvin E
12/13/2017 2:53:40 PM

No feedback given

Anonymous Reviewer
11/03/2017 8:17:11 PM

I have a 10" Grizzly table saw that I bought in 1988. The start / stop switch welded shut and I could not turn off this saw without unplugging it. Without this switch I would have had to do extensive modification to the saw in order to install another switch. It would have been a bargain at 3X the price

Anonymous Reviewer
10/16/2017 5:11:22 PM

Ordered this switch to fit to my table wood saw.very good safe on /off component.

Anonymous Reviewer
10/16/2017 1:34:01 PM

No feedback given

Anonymous Reviewer
10/06/2017 2:43:08 PM

yes I'd recommend it - its an exact replacement for a part on a legacy machine. I was in the middle of building the doors for my new shop when the swith on my table saw decided to burn out. The manufacturer said that the part was no longer available, but when I went to Grizzley (my go- to place for keeping all my equipment running) I found not just a close replacement that would work, but the exact same product right down to the part numbers. I was thrilled and delighted. It was more than reasonable in price and shipped quickly. I was back to work in no time at all.

Anonymous Reviewer
06/02/2017 1:17:54 PM

No feedback given

Anonymous Reviewer
works great 06/02/2017 10:49:52 AM

No feedback given

Anonymous Reviewer
06/02/2017 5:55:04 AM

No feedback given

Anonymous Reviewer
06/01/2017 11:53:12 PM

No feedback given

Anonymous Reviewer
06/01/2017 9:06:44 PM

I have installed this on our Wilton belt sander and its working just fine, having the large stop paddle improves a safety stop option should an emergency occur.

Anonymous Reviewer
01/27/2017 6:25:10 PM

I was pleased with the quality of this product. worth more than the price I paid.

William M
Switch works okay, mounting screws do not fit a standard electrical box. 01/26/2017 11:38:09 PM

Mounting screws do not fit a standard electrical box.

rick S
Works fine 01/26/2017 2:55:57 PM

requires an extra large box to fit in which i had a little difficulty finding, but otherwise works quite well

Anonymous Reviewer
Best Price I Could Find on the Internet 01/26/2017 3:13:06 AM

The paddle switch was broke on my craftsman cabinet saw and the replacement was twice as much as I could get the exact same switch at Grizzly Thank you

Anonymous Reviewer
Decent switch 01/26/2017 1:54:35 AM

Replacement for my Griz cabinet saw. Straight up replacement. Works well/as designed.

Shorty
Tough fit 10/14/2016 10:53:23 AM

The switch works fine & hard to beat for the $$. If installing in a handy box you'll need an extension. Wiring requires ring terminals which either stick out sideways or to the rear too much to fit box. Unlike American switches with clamp style terminals on the switch. I put on a drill press so paddle feature less necessary. Doing again, I would spend the extra for easier wiring. Switch does seem to be good quality though.

Phil
Good switch 04/23/2016 11:00:57 PM

I had to do a lot of grinding and filling to get this switch to fit in a deep electrical box, but it is worth the trouble. It may fit better in a different box. Works great with my 2hp tablesaw. I like the safety of being able to kick the saw off with my knee if needed, without letting go of the wood.