Grizzly C2005 - Shaper Cutter - 1/4" Groove (Part of Set C2310), 1/2" Bore
C2005 Shaper Cutter - 1/4" Groove
A carbide cutter that’s better than a typical HSS cutters.
The carbide-tipped C2005 Shaper Cutter is specifically made for use on shapers with 1/2" spindles.
This 1/2" bore, 2mm thick carbide cutter stays sharp longer than the old HSS cutters and is priced right, too.
HSS (high-speed steel) has been heat treated for hardness and wear resistance, which keeps a sharp edge longer than other carbon steels.
The carbide tips are even stronger than HSS and evenly balanced around the cutter for smoother cutting.
This is just the groove cutter. Save by ordering the tongue and groove set, C2310.
Can be used on hard woods, soft woods, and wood composite materials.
The cutter is best suited for use between 5,000–10,000 RPM.
Smaller profiles are ideal for shaping small radii and for making picture frames.
The Grizzly Customer Service and Technical Support Teams are U.S. based.
- Cutter Diameter: 2"
- Cutting Length: 1"
- Bore: 1/2"
- Maximum RPM: 15,000