Supercut G6640 - 106" x 3/16" x .025" x 4 TPI Skip Bandsaw Blade
G6640 106" x 3/16" x .025" x 4 TPI Skip Bandsaw Blade
An economical 106" carbon steel skip blade for general cutting with all-round performance.
Skip blades have regularly spaced teeth at 0° rake angle with wide, flat gullets. This configuration leaves a clean cut and helps prevent clogging when cutting soft wood, non-ferrous metals, and plastics.
We sell skip blades in 4 TPI versions. The more teeth per inch on the blade, the smoother the cut will be.
These blades have the same shape as raker blades, but without over other tooth comparatively. This makes for a faster and more aggressive cut, but is not as clean.
Width is an important factor when considering a new blade. The typical range is as small as 1/8" wide to 3/4" wide. The skip blades we sell are 3/16" wide blade is great for contour sawing with a minimum radius of 5/16".
The flex back blade helps with absorbing the stresses of contour sawing. It is heat-treated at the teeth, leaving the back with more flexibility for movement through the material.
The 106" length blade fits some 14" bandsaws. Choosing the correct blade for your 14" bandsaw can seem like a helpless task. Using the incorrect blade can dramatically affect your bandsaw’s operation. With this explanation, the factors you would select the G6638 106" x 1/8" x .025" x 14 TPI Raker Bandsaw Blade should make total sense for your needs.
Here is a useful bandsaw blade chart to help visualize general blade configurations and capabilities.
The Grizzly Customer Service and Technical Support teams are based in the U.S.A.
- Length: 106"
- Width: 3/16"
- Gauge: 0.025"
- TPI: 4 Skip
- Type: Carbon tool steel
- Grizzly G0457
- Grizzly G0778
For other 106" blades, click here.