Shop Fox W1756 43" 25 HP 3-Phase Wide-Belt Sander
Built for shops that make tables and custom doors up to 43" wide.
The W1756 43" 25 HP 3-Phase Wide-Belt Sander has an adjustable platen and variable-speed conveyor to make for unrivaled control over final sanding results, which is crucial when working with a variety of hardwood.
Loaded with proven and highly-effective features, this workhorse delivers great workpiece finishes quickly and consistently.
The digital amperage draw meter is used to keep the machine from being overloaded during sanding operations.
When pushed, the emergency stop plate, stops the electricity to the motors and also applies an air-disc brake to stop the sander immediately.
The belt runs on a platen system which allows you to adjust the sanding depth. The sanding belts are 43" wide by 60" long. For a full range of replacement belts for the W1756, shop here.
The W1756 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 Factory
CSA and UL certified
SPECIFICATIONS:
- Sanding belt motor: 25 HP, 230V/460V, 3-phase, 48A/24A
- Conveyor motor: 2 HP, 6A/3A
- Table elevation motor: 1/4 HP, 1.2A/0.6A
- Maximum board width: 43"
- Maximum board thickness: 6"
- Minimum board length: 14"
- Minimum board thickness: 3/16"
- Feed rate: variable, 14–60 FPM
- Sanding belt size: 43" x 60"
- Drum speed: 2200 FPM
- Air requirements: 75 PSI
- Footprint: 60" W x 20-1/2" D
- Overall dimensions: 62" W x 50" D x 70" H
- Approximate shipping weight: 2537 lbs.
FEATURES:
- Two-year warranty!!
- Convenient control panel with separate switches for each motor
- Amp meter load sensing system
- Disc brake system for emergency stops
- Double infeed and outfeed pressure rollers
- Fast belt changes (takes less than 30 seconds!)
- Digital readout accurate to within 0.005"
- Micro-adjustable graphite/felt
- Variable feed speeds
- Four 4" dust ports
Due to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.
Hover to View 43" Models
Shop Fox W1756 43" 25 HP 3-Phase Wide-Belt Sander
Built for shops that make tables and custom doors up to 43" wide.
The W1756 43" 25 HP 3-Phase Wide-Belt Sander has an adjustable platen and variable-speed conveyor to make for unrivaled control over final sanding results, which is crucial when working with a variety of hardwood.
Loaded with proven and highly-effective features, this workhorse delivers great workpiece finishes quickly and consistently.
The digital amperage draw meter is used to keep the machine from being overloaded during sanding operations.
When pushed, the emergency stop plate, stops the electricity to the motors and also applies an air-disc brake to stop the sander immediately.
The belt runs on a platen system which allows you to adjust the sanding depth. The sanding belts are 43" wide by 60" long. For a full range of replacement belts for the W1756, shop here.
The W1756 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The easy-to-read manual provides full instructions on how to assemble and maintain your sander.
Made in an ISO 9001 Factory
CSA and UL certified
SPECIFICATIONS:
- Sanding belt motor: 25 HP, 230V/460V, 3-phase, 48A/24A
- Conveyor motor: 2 HP, 6A/3A
- Table elevation motor: 1/4 HP, 1.2A/0.6A
- Maximum board width: 43"
- Maximum board thickness: 6"
- Minimum board length: 14"
- Minimum board thickness: 3/16"
- Feed rate: variable, 14–60 FPM
- Sanding belt size: 43" x 60"
- Drum speed: 2200 FPM
- Air requirements: 75 PSI
- Footprint: 60" W x 20-1/2" D
- Overall dimensions: 62" W x 50" D x 70" H
- Approximate shipping weight: 2537 lbs.
FEATURES:
- Two-year warranty!!
- Convenient control panel with separate switches for each motor
- Amp meter load sensing system
- Disc brake system for emergency stops
- Double infeed and outfeed pressure rollers
- Fast belt changes (takes less than 30 seconds!)
- Digital readout accurate to within 0.005"
- Micro-adjustable graphite/felt
- Variable feed speeds
- Four 4" dust ports
Due to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.
Compare with similar items Compare Others
|
|
