View Product
Animation for G7156
Your Cart ×
Estimated Total: Checkout Now

Premium quality swiveling milling vise features perfectly aligned, precision ground jaws, robust clamping screw and easy to read 0 - 360 degree scale. Trust your best work with this quality milling vise. Approx. shipping weight is 42 lbs.

  • Size: 4"
  • Maximum capacity: 4-3/4"
  • Length: 12-3/8"
  • Width: 5-5/8"
  • Reviews

    32 Customer Reviews (4.8 out of 5 stars) : Sign in to write a review

    Anonymous Reviewer
    Nice tool 08/17/2020 12:39:13 PM

    This is a very nice vise, with the jaws closed it lines up almost perfectly. I lined it up to my machine and marked Zero then used a sharp chisel for the permanent mark.
    Now I can set it on within .005 every time.

    Kenneth S
    Absolutely perfect vise for my Grizzly mill / drill. 07/31/2020 5:25:08 PM

    No feedback given

    Anonymous Reviewer
    I have not used it yet. Looks to be what I needed. 07/22/2020 4:53:29 PM

    I appreciate the way my exchange was handled. Thanks to Dan and everyone else.

    James B
    Good vise 07/11/2020 1:58:26 PM

    I needed a vise, so I bought this one. I am pleased with it. The slots are a little narrow for the T-bolts I am using, not a big issue if you have a mill.

    James M
    Nice for the Price 05/08/2020 5:09:16 PM

    Bought to go on my new G0705 and it is a perfect size for that mill. All working surfaces are true to each other. Sharp edges had to be filed off but it was not $500 Kurt either though it locks down the same.....

    William S
    03/12/2020 3:25:23 PM

    No feedback given

    Anonymous Reviewer
    12/29/2019 2:36:06 PM

    No feedback given

    Anonymous Reviewer
    Satisfied 11/16/2019 11:18:14 AM

    Great quality at a great price. It compliments my Grizzly mill just fine.

    Henry D
    Great product 11/13/2019 7:04:25 PM

    Vice works as advertised. Good product so far. I have had no issues with the vise, I have used it several times with no issues. Thank you for a good product.

    Anonymous Reviewer
    10/08/2019 11:26:58 PM

    Not bad for the money. Had to change out the hold down hardware. It seems Grizzly uses some not-metric-not-standard size hardware in some places.
    There is a protractor scale on the vise, but no corresponding index mark. No big deal. Zeroed the vise and center punched a mark.
    The locking handle is a bad joke. The hex on the vise measures around 12 mm, while the handle is more like 14mm. Grabbed a 12mm wrench out of the drawer, and tossed the handle.

    Anonymous Reviewer
    Great vice 06/06/2019 11:15:07 AM

    This vice replaced my old vice and is working much better

    Anonymous Reviewer
    Fits the 704 mill pretty good. 06/05/2019 12:16:32 PM

    I got this for my 0704 Mill and it fits pretty good. I use it without the swivel base most of the time, to reduce the height.

    Anonymous Reviewer
    Milling Vise - 4" 05/03/2019 8:06:56 PM

    No feedback given

    Brian C
    Well built 04/06/2019 3:44:26 PM

    Nice unit. But it is much bigger than you realize. Not exactly mini mill friendly but works.

    Anonymous Reviewer
    04/03/2019 11:34:38 AM

    Vise seems to be quite well made. Jaws and base are very parallel to each other.

    Anonymous Reviewer
    05/12/2018 3:27:41 PM

    good vise, a little rough on the edges but a file and stone cleaned it up.

    Anonymous Reviewer
    03/14/2018 4:27:12 PM

    No feedback given

    Gary J
    01/15/2018 10:36:12 PM

    No feedback given

    Fausto G
    10/25/2017 4:33:11 PM

    No feedback given

    Anonymous Reviewer
    excellant deal 09/27/2017 3:51:57 PM

    No feedback given

    Richard C
    08/16/2017 11:45:25 AM

    No feedback given

    John B
    Nice Vise but requires modification for use with G0463 06/29/2017 10:29:08 AM

    The centering stubs on the bottom of the vise are too wide to fit in the slots in the G0463's table. I guess I have to machine it or grind it down. Anyways, you can opt to not screw in the stubs but then you will have centering issues you have ro account for. Other than that its a great little vise.

    ross P
    Good Product 06/07/2017 6:22:31 AM

    I am very happy with this vise for the cost it is pretty hard to beat.

    Anonymous Reviewer
    06/05/2017 1:54:00 AM

    No feedback given

    Scott C
    ehhh... It'll work 06/04/2017 11:59:22 PM

    It was very hard to true to my mill secondary to the way the bolts clamp the rotating base. I don't find it to be as sturdy at the drill press vise I was previously using. I also found that I still had slight lifting/tilting of material when clamping the jaw against it. This is the only "milling vise" I've owned, so I don't know if there are better ones out there. Overall, I was disappointed with it. I'm seriously considering going back to my drilling vise, but my wife will hate me if I don't use my vise after spending $140 on it.

    Anonymous Reviewer
    06/02/2017 1:36:31 PM

    No feedback given

    Billy A
    06/02/2017 12:21:27 PM

    Bought this along with a knee mill, seems well built and has held every part I've milled so far. Very happy with the vice, the mill and numerous other tools I have purchased from grizzly.

    James N
    05/24/2017 11:33:42 AM

    I bought this vise a month ago. it is as advertised. Medium priced medium quality overall a good deal. On grizzlies website it was on sale. when I went to place an order they charge me full price. that I was not happy about. I told them I could get it cheaper on Amazon they didn't seem to care. But overall I am satisfied with the vice.

    Anonymous Reviewer
    Love it! 05/18/2017 10:43:00 PM

    No feedback given

    Anonymous Reviewer
    05/17/2017 1:26:50 PM

    No feedback given

    Gene T
    02/24/2017 5:22:52 PM

    No feedback given

    Anonymous Reviewer
    Very good product , holds my work super tight with out moving. 01/26/2017 1:26:49 AM

    No feedback given