G0819 15" 5 HP Open-End Wide-Belt Sander
Double your sanding capacity within a small footprint.
The G0819 15" 5 HP Open-End Wide-Belt Sander is for those looking to maximize efficiency in their wood shop.
With a footprint of 19-1/2" x 27-1/2", this heavy-duty sander is capable of sanding a 30" wide workpiece in two passes. That’s a lot of capacity for a smaller sander!
It takes less than 30 seconds to change out the 16" x 48" sanding belts. For a full range of replacement belts for the G0819, shop here.
With a focus on rigidity and production work, the G0819 will have zero flex on a heavy pass. An adjustable side support slides out from the side of the machine, eliminating the need for aftermarket supports.
The three conveyor speeds of 16.4, 23, and 32.8 feet per minute allow for adjustment based on the type wood being sanded.
The G0819 has pneumatic oscillation speed control and a pulse-jet cleaning system to keep the electric oscillation sensor dust-free.
Other quality features such as an amp meter, micro-adjustable graphite-felt platen, and emergency stop plate makes this a high-caliber machine.
The G0819 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your belt sander.
Made in an ISO 9001 factory
SPECIFICATIONS
- Sanding belt motor: 5 HP, 220V, single-phase, 30 A
- Conveyor motor: 1/2 HP, 2.8A
- Air requirement: 75 PSI, 2 CFM
- Maximum board width: 15" single pass, 30" double pass
- Maximum board thickness: 6"
- Minimum board length: 12-5/8"
- Sanding belt size: 16" x 48"
- Sandpaper speed: 2300 FPM
- Conveyor speed rate: 16.4, 23, 32.8 FPM
- Conveyor table length: 24"
- Platen type: 1-3/4" x 15-3/8" Graphite pad
- Dust port size: 5"
- Footprint: 19-1/2" x 27-1/2"
- Overall size: 29-1/8" W x 38-1/2" D x 64-1/2" H
- Approximate shipping weight: 930 lbs.
FEATURES:
- Quick sandpaper changes
- Pneumatic belt tracking and tensioning
- Built-in pneumatic regulator/water separator
- Micro-adjustable graphite-felt platen
- Handwheel-controlled table elevation
- Inch/metric thickness scale
- Two rubber pressure rollers
- Digital amp/load meter
- Disc brake for emergency stops
- Safety shut-off bar
- 100- and 180-Grit sanding belts included
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G0819 comes with a 1-year warranty.
Hover to View 15"-20" Models
Accessories
G0819 15" 5 HP Open-End Wide-Belt Sander
Double your sanding capacity within a small footprint.
The G0819 15" 5 HP Open-End Wide-Belt Sander is for those looking to maximize efficiency in their wood shop.
With a footprint of 19-1/2" x 27-1/2", this heavy-duty sander is capable of sanding a 30" wide workpiece in two passes. That’s a lot of capacity for a smaller sander!
It takes less than 30 seconds to change out the 16" x 48" sanding belts. For a full range of replacement belts for the G0819, shop here.
With a focus on rigidity and production work, the G0819 will have zero flex on a heavy pass. An adjustable side support slides out from the side of the machine, eliminating the need for aftermarket supports.
The three conveyor speeds of 16.4, 23, and 32.8 feet per minute allow for adjustment based on the type wood being sanded.
The G0819 has pneumatic oscillation speed control and a pulse-jet cleaning system to keep the electric oscillation sensor dust-free.
Other quality features such as an amp meter, micro-adjustable graphite-felt platen, and emergency stop plate makes this a high-caliber machine.
The G0819 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your belt sander.
Made in an ISO 9001 factory
SPECIFICATIONS
- Sanding belt motor: 5 HP, 220V, single-phase, 30 A
- Conveyor motor: 1/2 HP, 2.8A
- Air requirement: 75 PSI, 2 CFM
- Maximum board width: 15" single pass, 30" double pass
- Maximum board thickness: 6"
- Minimum board length: 12-5/8"
- Sanding belt size: 16" x 48"
- Sandpaper speed: 2300 FPM
- Conveyor speed rate: 16.4, 23, 32.8 FPM
- Conveyor table length: 24"
- Platen type: 1-3/4" x 15-3/8" Graphite pad
- Dust port size: 5"
- Footprint: 19-1/2" x 27-1/2"
- Overall size: 29-1/8" W x 38-1/2" D x 64-1/2" H
- Approximate shipping weight: 930 lbs.
FEATURES:
- Quick sandpaper changes
- Pneumatic belt tracking and tensioning
- Built-in pneumatic regulator/water separator
- Micro-adjustable graphite-felt platen
- Handwheel-controlled table elevation
- Inch/metric thickness scale
- Two rubber pressure rollers
- Digital amp/load meter
- Disc brake for emergency stops
- Safety shut-off bar
- 100- and 180-Grit sanding belts included
Need help?
We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G0819 comes with a 1-year warranty.
Compare with similar items Compare Others
|
|
