G0824 14" x 40" Gunsmith Lathe with 2" Spindle Bore

Bigger bore equals bigger barrels.

The G0824 14" x 40" Gunsmith Lathe has a huge 2" spindle bore, the largest of any of our 14" x 40" lathes. The extra-large spindle bore is what makes it perfect for gunsmithing barrels.

What makes the G0824 a "gunsmithing" lathe is that it comes with features typically not found on standard lathes, such as the extra-large spindle bore, a "spider" mount system and high-precision bearings.

The spider is especially designed for supporting gun barrels during chambering operations; however, it is a great support option for almost any long workpiece that extends through the outboard side of the spindle.

The G0824 includes a DRO, so accuracy and precision are ensured!

This 14" x 40" Gunsmith Lathe has an 8-speed gearhead for spindle speeds from 70–2000 RPM.

The G0824 includes other exceptional equipment you’ll need to get up and running including: a D1-5 camlock spindle, 200-series quick-change tool post, flood coolant system, LED work light, pull-out chip tray, ball-bearing steady and follow rests, steel stand, and safety foot brake!

The G0824 manual was written by our U.S.-based Documentation Department and is packed with useful information. The complete-and-easy to read manual makes it easier to assemble and maintain your power feeder.

Made in an ISO 9001 factory

SPECIFICATIONS:

• Main motor: 2-1/2 HP, 220V, single-phase, 10A
• Coolant pump motor: 40W, 0.45A
• Swing over bed: 14"
• Swing over cross slide: 8-13/16"
• Distance between centers: 40"
• Spindle nose: D1-5 camlock
• Spindle bore: 2.01" (51mm)
• Spindle taper: MT#6
• Spindle speeds: 8, 70–2000 RPM
• Spindle length: 17-1/4"
• Tailstock barrel taper: MT#3
• Tailstock barrel travel: 3-15/16"
• Cross slide travel: 6-11/16"
• Compound travel: 3-7/8"
• Range of threads (inches): 34 @ 4–56 TPI
• Range of threads (metric): 26 @ 0.4–7mm
• Width of bed: 7-3/8"
• Approximate shipping weight: 1550 lb.

FEATURES:

• X- and Z-axis DRO
• Quick-change spindle speed and gearbox controls
• On/Off reverse spindle switch on carriage
• Steady and follow rests with roller bearing supports
• Built-in coolant system
• D1-5 camlock spindle nose
• 7" 3-jaw chuck and 8" 4-jaw chuck
• 200-series quick-change tool post

Headstock oil not included.

Due to product size, this item must be delivered to a loading dock or unloaded with a forklift. Liftgate not available.

Need help?

We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition. And to ensure your satisfaction, the G0824 comes with a 1-year warranty.